The influences of compressive stress on the dielectric and ferroelectric properties of Fe3+/Nb5+ hybrid-doped barium titanate (BaTiO3) ceramics were investigated. Superimposed compressive stress had a pronounced effect on the electrical properties of the ceramics. The response of low-field dielectric properties to stress changed from soft to hard piezoelectric behavior with increasing Nb5+ content. While ferroelectric properties decreased with stress, hardening behavior was observed with increasing Nb5+ content in hybrid-doped BaTiO3 ceramics. A mechanism based on induced change in the acceptor valence by the donor dopant in hybrid-doped BaTiO3 ceramics was proposed to explain the results obtained.

No abstract

Promising piezoelectric properties have been reported recently for lead-free 0.96(K0.48Na0.52Nb0.95Sb0.05)-0.04Bi0.5(Na0.82K0.18)0.5ZrO3 (KNNS-BNKZ) ceramics. The presence of coexisting ferroelectric rhombohedral and tetragonal phases is thought to play a key role in their functional properties, but a thorough understanding is currently lacking. In this experiment, (1-x)KNNS-(x)BNKZ ceramics with x = 0 to 0.05 were prepared by the mixed-oxide method. High resolution synchrotron x-ray powder diffraction (SXPD) measurements reveal that the addition of BNKZ into KNNS ceramics leads to an increase of the rhombohedral-orthorhombic phase transition temperature (TR-O) and a reduction of the orthorhombic-tetragonal phase transition temperature (TO-T) leading to orthorhombic-tetragonal and rhombohedral-tetragonal phase coexistence at room temperature for compositions with x = 0.02 and 0.04, respectively. By combining the results of the SXPD measurements with microstructural examination using SEM, evidence is also found for the occurrence of chemical heterogeneity, which could provide an additional means to control the functional properties. The structural observations are correlated with changes in the dielectric properties, obtained as permittivity-temperature plots, and variations in the polarisation and coercive field values, obtained from measurements of the ferroelectric hysteresis loops.

No abstract

In this work, an X-ray Absorption Spectroscopy (XAS) measurement was employed to determine the local structure of Mn in BaTiO 3 . A combination of Synchrotron X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EX-AFS) experiments was performed on Mn-doped BaTiO 3 samples. The BaTi 1 -x Mn2) were used for the XAS experiment. XAS spectra at the Mn K-edge were recorded in transmission mode. The spectra were collected at ambient temperature with a Ge(111) double crystal monochromator and recorded after performing an energy calibration. The features of the measured Mn K-edge XANES and EXAFS were both consistent with Mn on the Ti site and inconsistent with Mn on other sites. In addition, the dielectric and ferroelectric properties results also supported the possible Mn T i substitution in BaTiO 3 material. The clear agreement between the two measured synchrotron XAS spectra, as well as supporting electrical results, was by far the strongest evidence of Mn substituting for Ti in BaTiO 3 structure.

Promising piezoelectric properties have been reported in potassium sodium niobate-based ceramics by introducing Bi 0.5 (Na 0.82 K 0.18) 0.5 ZrO 3 (BNKZ) into K 0.48 Na 0.52 Nb 0.95 Sb 0.05 O 3 (KNNS) solid solutions in order to control the polymorphic phase transformation temperatures. In the present study, synchrotron x-ray powder diffraction (SXPD) was employed in combination with dielectric and ferroelectric measurements in order to clarify the influence of BNKZ on the phase transition temperatures of (1-x)KNNS-(x)BNKZ ceramics (with x = 0 to 0.05). The results, presented in terms of temperature-dependent SXPD patterns, dielectric permittivity and thermal depolarisation characteristics, confirmed that polymorphic phase transformation temperatures all shifted in a systematic manner with increasing BNKZ content. Broadening of the phase transition regions was also observed with increasing BNKZ content, leading to improvements in thermal stability of the ferroelectric properties. Microstructural examination of the KNNS-BNKZ ceramics revealed the presence of core-shell microstructures; this was correlated with the presence of weak shoulders on the diffraction peaks.

No abstract

In this study, the influence of Mn addition on phase formation, microstructure and electrical properties of Ba(Ti1-xMnx)O3 where x = 0.01 to 0.2 was investigated. The XRD patterns showed that the crystal structure of Ba(Ti1-xMnx)O3 at room temperature changed from tetragonal to hexagonal as Mn concentration increased, which also caused the room temperature dielectric constant decrease from 1143 to 47. The microstructure of Ba(Ti1-xMnx)O3 ceramics at low concentration revealed a bimodal microstructure. As the x value increased, the well grown grains decreased with the extent of fine-grained increased. Ferroelectric hysteresis (P-E) loop was not clearly observed as Mn concentration increased because of the formation of paraelectric hexagonal phase