The pixel is the minimum unit used to represent or record information in photonic devices. The size of the pixel determines the density of the integrated information, such as the resolution of displays or cameras. Most methods used to produce display pixels are based on two-dimensional patterning of light-emitting materials. However, the brightness of the pixels is limited when they are miniaturized to nanoscale dimensions owing to their limited volume. Herein, we demonstrate the production of three-dimensional (3D) pixels with nanoscale dimensions based on the 3D printing of quantum dots embedded in polymer nanowires. In particular, a femtoliter meniscus was used to guide the solidification of liquid inks to form vertically freestanding nanopillar structures. Based on the 3D layout, we show high-density integration of color pixels, with a lateral dimension of 620 nm and a pitch of 3 μm for each of the red, green, and blue colors. The 3D structure enabled a 2-fold increase in brightness without significant effects on the spatial resolution of the pixels. In addition, we demonstrate individual control of the brightness based on a simple adjustment of the height of the 3D pixels. This method can be used to achieve super-high-resolution display devices and various photonic applications across a range of disciplines.

No abstract

Electrochemical water splitting has been considered one of the most promising methods of hydrogen production, which does not cause environmental pollution or greenhouse gas emissions. Oxygen evolution reaction (OER) is a significant step for highly efficient water splitting because OER involves the four electron transfer, overcoming the associated energy barrier that demands a potential greater than that required by hydrogen evolution reaction. Therefore, an OER electrocatalyst with large surface area and high conductivity is needed to increase the OER activity. In this work, we demonstrated an effective strategy to produce a highly active three-dimensional (3D)-printed NiFe-layered double hydroxide (LDH) pyramid electrode for OER using a three-step method, which involves direct-ink-writing of a graphene pyramid array and electrodeposition of a copper conducive layer and NiFe-LDH electrocatalyst layer on printed pyramids. The 3D pyramid structures with NiFe-LDH electrocatalyst layers increased the surface area and the active sites of the electrode and improved the OER activity. The overpotential (η) and exchange current density (i0) of the NiFe-LDH pyramid electrode were further improved compared to that of the NiFe-LDH deposited Cu (NiFe-LDH/Cu) foil electrode with the same base area. The 3D-printed NiFe-LDH electrode also exhibited excellent durability without potential decay for 60 h. Our 3D printing strategy provides an effective approach for the fabrication of highly active, stable, and low-cost OER electrocatalyst electrodes.