A cost-effective catalyst should have a high dispersion of the active atoms, together with a controllable surface structure for the optimization of activity, selectivity, or both. We fabricated nanocages by depositing a few atomic layers of platinum (Pt) as conformal shells on palladium (Pd) nanocrystals with well-defined facets and then etching away the Pd templates. Density functional theory calculations suggest that the etching is initiated via a mechanism that involves the formation of vacancies through the removal of Pd atoms incorporated into the outermost layer during the deposition of Pt. With the use of Pd nanoscale cubes and octahedra as templates, we obtained Pt cubic and octahedral nanocages enclosed by {100} and {111} facets, respectively, which exhibited distinctive catalytic activities toward oxygen reduction.

Nanoscale Pt-Ni bimetallic octahedra with controlled sizes have been actively explored in recent years owning to their outstanding activity for the oxygen reduction reaction (ORR). Here we report the synthesis of uniform 9 nm Pt-Ni octahedra with the use of oleylamine and oleic acid as surfactants and W(CO)6 as a source of CO that can promote the formation of {111} facets in the presence of Ni. Through the introduction of benzyl ether as a solvent, the coverage of both surfactants on the surface of resultant Pt-Ni octahedra was significantly reduced while the octahedral shape was still attained. By further removing the surfactants through acetic acid treatment, we observed a specific activity 51-fold higher than that of the state-of-the-art Pt/C catalyst for the ORR at 0.93 V, together with a record high mass activity of 3.3 A mgPt(-1) at 0.9 V (the highest mass activity reported in the literature was 1.45 A mgPt(-1)). Our analysis suggests that this great enhancement of ORR activity could be attributed to the presence of a clean, well-preserved (111) surface for the Pt-Ni octahedra.

Nanomaterials offer new opportunities for cancer diagnosis and treatment. Multifunctional nanoparticles harboring various functions including targeting, imaging, therapy, and etc have been intensively studied aiming to overcome limitations associated with conventional cancer diagnosis and therapy. Of various nanoparticles, magnetic iron oxide nanoparticles with superparamagnetic property have shown potential as multifunctional nanoparticles for clinical translation because they have been used asmagnetic resonance imaging (MRI) constrast agents in clinic and their features could be easily tailored by including targeting moieties, fluorescence dyes, or therapeutic agents. This review summarizes targeting strategies for construction of multifunctional nanoparticles including magnetic nanoparticles-based theranostic systems, and the various surface engineering strategies of nanoparticles for in vivo applications.

An effective strategy for reducing the Pt content while retaining the activity of a Pt-based catalyst is to deposit the Pt atoms as ultrathin skins of only a few atomic layers thick on nanoscale substrates made of another metal. During deposition, however, the Pt atoms often take an island growth mode because of a strong bonding between Pt atoms. Here we report a versatile route to the conformal deposition of Pt as uniform, ultrathin shells on Pd nanocubes in a solution phase. The introduction of the Pt precursor at a relatively slow rate and high temperature allowed the deposited Pt atoms to spread across the entire surface of a Pd nanocube to generate a uniform shell. The thickness of the Pt shell could be controlled from one to six atomic layers by varying the amount of Pt precursor added into the system. Compared to a commercial Pt/C catalyst, the Pd@PtnL (n = 1-6) core-shell nanocubes showed enhancements in specific activity and durability toward the oxygen reduction reaction (ORR). Density functional theory (DFT) calculations on model (100) surfaces suggest that the enhancement in specific activity can be attributed to the weakening of OH binding through ligand and strain effects, which, in turn, increases the rate of OH hydrogenation. A volcano-type relationship between the ORR specific activity and the number of Pt atomic layers was derived, in good agreement with the experimental results. Both theoretical and experimental studies indicate that the ORR specific activity was maximized for the catalysts based on Pd@Pt2-3L nanocubes. Because of the reduction in Pt content used and the enhancement in specific activity, the Pd@Pt1L nanocubes showed a Pt mass activity with almost three-fold enhancement relative to the Pt/C catalyst.

Multitasking rust ball: The questions of where a tumor is located, whether drugs are properly delivered to the tumor, and what the therapeutic response of the tumor is, could be answered by using simple but smart, drug‐loaded superparamagnetic iron oxide nanoparticles that can accumulate in tumor with high efficiency thanks to the presence of rationally engineered polymer coating layers.

We report a facile synthesis of multiply twinned Pd@Pt core-shell concave decahedra by controlling the deposition of Pt on preformed Pd decahedral seeds. The Pt atoms are initially deposited on the vertices of a decahedral seed, followed by surface diffusion to other regions along the edges/ridges and then across the faces. Different from the coating of a Pd icosahedral seed, the Pt atoms prefer to stay at the vertices and edges/ridges of a decahedral seed even when the deposition is conducted at 200 °C, naturally generating a core-shell structure covered by concave facets. The nonuniformity in the Pt coating can be attributed to the presence of twin boundaries at the vertices, as well as the {100} facets and twin defects along the edges/ridges of a decahedron, effectively trapping the Pt adatoms at these high-energy sites. As compared to a commercial Pt/C catalyst, the Pd@Pt concave decahedra show substantial enhancement in both catalytic activity and durability toward the oxygen reduction reaction (ORR). For the concave decahedra with 29.6% Pt by weight, their specific (1.66 mA/cm(2)Pt) and mass (1.60 A/mgPt) ORR activities are enhanced by 4.4 and 6.6 times relative to those of the Pt/C catalyst (0.36 mA/cm(2)Pt and 0.32 A/mgPt, respectively). After 10,000 cycles of accelerated durability test, the concave decahedra still exhibit a mass activity of 0.69 A/mgPt, more than twice that of the pristine Pt/C catalyst.

We systematically evaluated two different approaches to the syntheses of Pd@PtnL (n = 2-5) core-shell octahedra. We initially prepared the core-shell octahedra using a polyol-based route by titrating a Pt(IV) precursor into the growth solution containing Pd octahedral seeds at 200 °C through the use of a syringe pump. The number of Pt atomic layers could be precisely controlled from two to five by increasing the volume of the precursor solution while fixing the amount of seeds. We then demonstrated the synthesis of Pd@PtnL octahedra using a water-based route at 95 °C through the one-shot injection of a Pt(II) precursor. Due to the large difference in reaction temperature, the Pd@PtnL octahedra obtained via the water-based route showed sharper corners than their counterparts obtained through the polyol-based route. When compared to a commercial Pt/C catalyst based upon 3.2 nm Pt particles, the Pd@PtnL octahedra prepared using both methods showed similar remarkable enhancement in terms of activity (both specific and mass) and durability toward the oxygen reduction reaction. Calculations based upon periodic, self-consistent density functional theory suggested that the enhancement in specific activity for the Pd@PtnL octahedra could be attributed to the destabilization of OH on their PtnL*/Pd(111) surface relative to the {111} and {100} facets exposed on the surface of Pt/C. The destabilization of OH facilitates its hydrogenation, which was found to be the rate-limiting step of the oxygen reduction reaction on all these surfaces.

We report an approach based on a combination of inductively coupled plasma mass spectrometry and X-ray photoelectron spectroscopy for quantitative analysis of the role played by Br(-) ions in the synthesis of Pd nanocrystals. The Br(-) ions were found to adsorb onto Pd{100} facets selectively with a coverage density of ca. 0.8 ion per surface Pd atom. The chemisorbed Br(-) ions could be removed via desorption at an elevated temperature under reductive conditions. They could also be gradually released from the surface when Pd cubic seeds grew into cuboctahedrons and then octahedrons. On the basis of the coverage density information, we were able to estimate the minimum concentration of Br(-) ions needed for the formation of Pd nanocubes with a specific size. If the concentration of Br(-) ions was below this minimum value, not all of the {100} facets could be stabilized by the capping agent, leading to the formation of nanocubes with truncated corners. The quantitative analysis developed in this study is potentially extendable to other systems involving chemisorbed capping agents.