With the urgent market demand for high-energy-density batteries, the alloy-type or conversion-type anodes with high specific capacity have gained increasing attention to replace current low-specific-capacity graphite-based anodes. However, alloy-type and conversion-type anodes have large initial irreversible capacity compared with graphite-based anodes, which consume most of the Li+ in the corresponding cathode and severely reduces the energy density of full cells. Therefore, for the practical application of these high-capacity anodes, it is urgent to develop a commercially available prelithiation technique to compensate for their large initial irreversible capacity. At present, various prelithiation methods for compensating the initial irreversible capacity of the anode have been reported, but due to their respective shortcomings, large-scale commercial applications have not yet been achieved. In this review, we have systematically summarized and analyzed the advantages and challenges of various prelithiation methods, providing enlightenment for the further development of each prelithiation strategy toward commercialization and thus facilitating the practical application of high-specific-capacity anodes in the next-generation high-energy-density lithium-ion batteries.

Novel diterpenoids, erinacines H (1) and I (3), were isolated from the cultured mycelia of Hericium erinaceum. The structures of the compounds were determined by interpretation of the spectral data. Erinacine H showed stimulating activity of nerve growth factor (NGF)-synthesis.

a b s t r a c t Accurate prediction of limit cycle oscillations resulting from combustion instability has been a long-standing challenge. The present work uses a coupled approach to predict the limit cycle characteristics of a combustor, developed at Cambridge University, for which experimental data are available (Balachandran, Ph.D. thesis, 2005). The combustor flame is bluff-body stabilised, turbulent and partially-premixed. The coupled approach combines Large Eddy Simulation (LES) in order to characterise the weakly non-linear response of the flame to acoustic perturbations (the Flame Describing Function (FDF)), with a low order thermoacoustic network model for capturing the acoustic wave behaviour. The LES utilises the open source Computational Fluid Dynamics (CFD) toolbox, OpenFOAM, with a low Mach number approximation for the flow-field and combustion modelled using the PaSR (Partially Stirred Reactor) model with a global one-step chemical reaction mechanism for ethylene/air. LES has not previously been applied to this partially-premixed flame, to our knowledge. Code validation against experimental data for unreacting and partially-premixed reacting flows without and with inlet velocity perturbations confirmed that both the qualitative flame dynamics and the quantitative response of the heat release rate were captured with very reasonable accuracy. The LES was then used to obtain the full FDF at conditions corresponding to combustion instability, using harmonic velocity forcing across six frequencies and four forcing amplitudes. The low order thermoacoustic network modelling tool used was the open source OSCILOS (http://www.oscilos.com). Validation of its use for limit cycle prediction was performed for a well-documented experimental configuration, for which both experimental FDF data and limit cycle data were available. The FDF data from the LES for the present test case was then imported into the OSCILOS geometry network and limit cycle oscillations of frequency 342 Hz and normalised velocity amplitude of 0.26 were predicted. These were in good agreement with the experimental values of 348 Hz and 0.21 respectively. This work thus confirms that a coupled numerical prediction of limit cycle behaviour is possible using an entirely open source numerical framework.

No abstract

Preterm delivery increases the risk of infant mortality and morbidity, and therefore developing reliable methods for predicting its likelihood are of great importance. Previous work using uterine electromyography (EMG) recordings has shown that they may provide a promising and objective way for predicting risk of preterm delivery. However, to date attempts at utilizing computational approaches to achieve sufficient predictive confidence, in terms of area under the curve (AUC) values, have not achieved the high discrimination accuracy that a clinical application requires. In our study, we propose a new analytical approach for assessing the risk of preterm delivery using EMG recordings which firstly employs Empirical Mode Decomposition (EMD) to obtain their Intrinsic Mode Functions (IMF). Next, the entropy values of both instantaneous amplitude and instantaneous frequency of the first ten IMF components are computed in order to derive ratios of these two distinct components as features. Discrimination accuracy of this approach compared to those proposed previously was then calculated using six differently representative classifiers. Finally, three different electrode positions were analyzed for their prediction accuracy of preterm delivery in order to establish which uterine EMG recording location was optimal signal data. Overall, our results show a clear improvement in prediction accuracy of preterm delivery risk compared with previous approaches, achieving an impressive maximum AUC value of 0.986 when using signals from an electrode positioned below the navel. In sum, this provides a promising new method for analyzing uterine EMG signals to permit accurate clinical assessment of preterm delivery risk.

A systematic method of extraction, fractionation, and purification of polysaccharides from Songshan Lingzhi (Ganoderma tsugae) with antitumor activity was established. Seven glycans with strong antitumor activities were obtained from 14 water-soluble, and 15 water-insoluble fractions: FIo-a, FA-1, FII-1, FIII-2, and FIII-2-a, -b, and -c. FIo-a and FA-1 were protein-containing glucogalactans associated with mannose and fucose. FII-1 was a (1-->3)-beta-D-glucan having a lower protein content. The water-insoluble fractions FIII-2-a, -b, and -c were extracted with alkali, and were found to be protein-containing (1-->3)-beta-D-glucans showing the strongest activity. Chemical properties and structure of each antitumor polysaccharide were compared with three fungi of the Ganoderma family, Kofukitake (G. applanatum), Mannentake (G. lucidum), and Songshan Lingzhi (G. tsugae).

Although solid electrolytes may overcome multiple bottlenecks in Li-ion batteries, its non-infiltrative nature makes the formation of intimate electrode-electrolyte contact quite difficult, severely limiting the cycling properties. Here we discovered that such a seamless contact may happen between Li-rich layered electrodes and perovskite electrolytes through epitaxy. The solid-solid composite electrode formed this way achieved a rate capability comparable with that of the solid-liquid composite electrode, indicating that epitaxy is a very efficient approach for mitigating the electrode-electrolyte contact issue in solid-state batteries.

No abstract