In modern society, traffic and transportation and the manufacturing industry and construction industries continuously release large amounts of dust and particles into the atmosphere, which can cause heavy air pollution, leading to health hazards. The haze disaster, a serious problem in developing countries such as China and India, has become one of the main issues of global environmental pollution in recent decades. Many air filtration technologies have been developed. Air filtration using electrospun fibers that intercept fine particles/volatile organic gases/bacterium is a relatively new, but highly promising, technique. Due to their interconnected nanoscale pore structures, highly specific surface areas, fine diameters, and porous structure as well as their ability to incorporate active chemistry on a nanoscale surface, electrospun fibers are becoming a promising versatile platform for air filtration. In this review, following a short introduction concerning the need for air filtration and filtration theory and mechanism, electrospun nanofibers membranes for air filtration have been highlighted, including the preparation (electrospinning process) and the parameters relevant to filtration efficacy. Additionally, various types (function) of the electrospun air filtration membranes have been classified in detail. Furthermore, their potential in the filtration of fine particles and chemical pollutants has been discussed. Finally, the challenges of their practical application and the future prospects have been summarized. Given that some advanced electrospun air filtration nanofibrous membranes exist for treating different contaminants from various types of polluted atmosphere, it is believed that they should make a significant contribution in protection against air pollution.

Cellulose nanocrystals and cellulose nanofibers with I and II crystalline allomorphs (designated as CNC I, CNC II, CNF I, and CNF II) were isolated from bleached wood fibers by alkaline pretreatment and acid hydrolysis. The effects of concentration, particle size, surface charge, and crystal structure on the lyophilization-induced self-assembly of cellulose particles in aqueous suspensions were studied. Within the concentration range of 0.5 to 1.0 wt %, cellulose particles self-organized into lamellar structured foam composed of aligned membrane layers with widths between 0.5 and 3 μm. At 0.05 wt %, CNC I, CNF I, CNC II, and CNF II self-assembled into oriented ultrafine fibers with mean diameters of 0.57, 1.02, 1.50, and 1.00 μm, respectively. The size of self-assembled fibers became larger when more hydroxyl groups and fewer sulfates (weaker electrostatic repulsion) were on cellulose surfaces. Possible formation mechanism was inferred from ice growth and interaction between cellulose nanoparticles in liquid-crystalline suspensions.

Conducting polymer hydrogels (CPHs) have emerged as a fascinating class of smart soft matters important for various advanced applications. However, achieving the synergistic characteristics of conductivity, self-healing ability, biocompatibility, viscoelasticity, and high mechanical performance still remains a critical challenge. Here, we develop for the first time a type of multifunctional hybrid CPHs based on a viscoelastic polyvinyl alcohol (PVA)-borax (PB) gel matrix and nanostructured CNFs-PPy (cellulose nanofibers-polypyrrole) complexes that synergizes the biotemplate role of CNFs and the conductive nature of PPy. The CNF-PPy complexes are synthesized through in situ oxidative polymerization of pyrrole on the surface of CNF templates, which are further well-dispersed into the PB matrix to synthesize homogeneous CNF-PPy/PB hybrid hydrogels. The CNF-PPy complexes not only tangle with PVA chains though hydrogen bonds, but also form reversibly cross-linked complexes with borate ions. The multi-complexation between each component leads to the formation of a hierarchical three-dimensional network. The CNF-PPy/PB-3 hydrogel prepared by 2.0 wt % of PVA, 0.4 wt % of borax, and CNF-PPy complexes with a mass ratio of 3.75/1 exhibits the highest viscoelasticity and mechanical strength. Because of a combined reinforcing and conductive network inside the hydrogel, its maximum storage modulus (∼0.1 MPa) and nominal compression stress (∼22 MPa) are 60 and 2240 times higher than those of pure CNF/PB hydrogel, respectively. The CNF-PPy/PB-3 electrode with a conductivity of 3.65 ± 0.08 S m has a maximum specific capacitance of 236.9 F g, and its specific capacitance degradation is less than 14% after 1500 cycles. The CNF-PPy/PB hybrid hydrogels also demonstrate attractive characteristics, including high water content (∼94%), low density (∼1.2 g cm), excellent biocompatibility, plasticity, pH sensitivity, and rapid self-healing ability without additional external stimuli. Taken together, the combination of such unique properties endows the newly developed CPHs with potential applications in flexible bioelectronics and provides a practical platform to design multifunctional smart soft materials.

This article highlights the properties of stimuli-responsive bio-based polymeric systems and their main intelligent applications.

Ambient particulate matter (PM) pollution has posed serious threats to global environment and public health. However, high efficient filtration of submicron particles, so named 'secondary pollution' caused by e.g. bacterial growth in filters and the use of non-degradable filter materials, remains a serious challenge. In this study, Polyvinyl alcohol (PVA) and konjac glucomannan (KGM) based nanofiber membranes, loaded with ZnO nanoparticles, were prepared through green electrospinning and eco-friendly thermal crosslinking. Thus obtained fibrous membranes do not only show high-efficient air-filtration performance but also show superior photocatalytic activity and antibacterial activity. The filtration efficiency of the ZnO@PVA/KGM membranes for ultrafine particles (300nm) were higher than 99.99%, being superior to commercial HEPA filters. By virtue of the high photocatalytic activity, the Methyl orange (MO) were efficiently decolorized with a removal efficiency of more than 98% at an initial concentration of 20 mgL-1 under 120 min solar irradiation. The multifunctional membrane with high removal efficiency, low flow resistance, superior photocatalytic activity and antibacterial activity was successfully achieved. It's conceivable that the combination of biodegradable polymer and active metal particle would form

No abstract

How do trees support their upright massive bodies? The support comes from the incredibly strong and stiff, and highly crystalline nanoscale fibrils of extended cellulose chains, called cellulose nanofibers. Cellulose nanofibers and their crystalline parts—cellulose nanocrystals, collectively nanocelluloses, are therefore the recent hot materials to incorporate in man‐made sustainable, environmentally sound, and mechanically strong materials. Nanocelluloses are generally obtained through a top‐down process, during or after which the original surface chemistry and interface interactions can be dramatically changed. Therefore, surface and interface engineering are extremely important when nanocellulosic materials with a bottom‐up process are fabricated. Herein, the main focus is on promising chemical modification and nonmodification approaches, aiming to prospect this hot topic from novel aspects, including nanocellulose‐, chemistry‐, and process‐oriented surface and interface engineering for advanced nanocellulosic materials. The reinforcement of nanocelluloses in some functional materials, such as structural materials, films, filaments, aerogels, and foams, is discussed, relating to tailored surface and/or interface engineering. Although some of the nanocellulosic products have already reached the industrial arena, it is hoped that more and more nanocellulose‐based products will become available in everyday life in the next few years.

No abstract