Research in stretchable conductors is fuelled by diverse technological needs. Flexible electronics, neuroprosthetic and cardiostimulating implants, soft robotics and other curvilinear systems require materials with high conductivity over a tensile strain of 100 per cent (refs 1-3). Furthermore, implantable devices or stretchable displays need materials with conductivities a thousand times higher while retaining a strain of 100 per cent. However, the molecular mechanisms that operate during material deformation and stiffening make stretchability and conductivity fundamentally difficult properties to combine. The macroscale stretching of solids elongates chemical bonds, leading to the reduced overlap and delocalization of electronic orbitals. This conductivity-stretchability dilemma can be exemplified by liquid metals, in which conduction pathways are retained on large deformation but weak interatomic bonds lead to compromised strength. The best-known stretchable conductors use polymer matrices containing percolated networks of high-aspect-ratio nanometre-scale tubes or nanowires to address this dilemma to some extent. Further improvements have been achieved by using fillers (the conductive component) with increased aspect ratio, of all-metallic composition, or with specific alignment (the way the fillers are arranged in the matrix). However, the synthesis and separation of high-aspect-ratio fillers is challenging, stiffness increases with the volume content of metallic filler, and anisotropy increases with alignment. Pre-strained substrates, buckled microwires and three-dimensional microfluidic polymer networks have also been explored. Here we demonstrate stretchable conductors of polyurethane containing spherical nanoparticles deposited by either layer-by-layer assembly or vacuum-assisted flocculation. High conductivity and stretchability were observed in both composites despite the minimal aspect ratio of the nanoparticles. These materials also demonstrate the electronic tunability of mechanical properties, which arise from the dynamic self-organization of the nanoparticles under stress. A modified percolation theory incorporating the self-assembly behaviour of nanoparticles gave an excellent match with the experimental data.
Cobalt hydroxide is a promising electrode material for supercapacitors due to the high capacitance and long cyclability. However, the energy storage/conversion mechanism of cobalt hydroxide is still vague at the atomic level. Here we shed light on how cobalt hydroxide functions as a supercapacitor electrode at operando conditions. We find that the high specific capacitance and long cycling life of cobalt hydroxide involve a complete modification of the electrode morphology, which is usually believed to be unfavourable but in fact has little influence on the performance. The conversion during the charge/discharge process is free of any massive structural evolution, but with some tiny shuffling or adjustments of atom/ion species. The results not only unravel that the potential of supercapacitors could heavily rely on the underlying structural similarities of switching phases but also pave the way for future material design for supercapacitors, batteries and hybrid devices.
Methods for the hydrogenation of CO into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO into ethanol over non-noble cobalt catalysts (CoAlO ), presenting a significant advance for the conversion of CO into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g h . Operando FT-IR spectroscopy revealed that the high ethanol selectivity over the CoAlO catalyst might be due to the formation of acetate from formate by insertion of *CH , a key intermediate in the production of ethanol by CO hydrogenation.
Alloys of transition-metal dichalcogenide can display distinctive phase evolution because of their two-dimensional structures. Herein, we report the colloidal synthesis of Mo1–x V x Se2 alloy nanosheets with full composition tuning. Alloying led to a phase transition at x = 0.7 from the semiconducting 2H phase MoSe2 to the metallic 1T phase VSe2. It also produced significant V and Se vacancies, which became the richest in the 2H phase at x = 0.3–0.5. Extensive spin-polarized density functional theory calculations consistently predicted the 2H–1T phase transition at x = 0.7, in agreement with the experimental results. The vacancy formation energy also supports the formation of V and Se vacancies. Alloying in the 2H phase enhanced the electrocatalytic performance toward hydrogen evolution reaction (HER) at x = 0.3 (in 0.5 M H2SO4) or 0.4 (in 1 M KOH). The Gibbs free energy along the HER pathway indicates that this maximum performance is due to the highest concentration of active V and Se vacancy sites.
Development of nanostructured materials with enhanced redox reaction capabilities is important for achieving high energy and power densities in energy storage systems. Here, we demonstrate that the nanohybridization of ionic liquids (ILs, 1-butyl-3-methylimidazolium tetrafluoroborate) and cobalt hydroxide (Co(OH)2) through ionothermal synthesis leads to a rapid and reversible redox reaction. The as-synthesized IL-Co(OH)2 has a favorable, tailored morphology with a large surface area of 400.4 m(2)/g and a mesopore size of 4.8 nm. In particular, the IL-Co(OH)2-based electrode exhibits improvement in electrochemical characteristics compared with bare Co(OH)2, showing a high specific capacitance of 859 F/g at 1 A/g, high-rate capability (∼95% retention at 30 A/g), and excellent cycling performance (∼96% retention over 1000 cycles). AC impedance analysis demonstrates that the introduction of ILs on Co(OH)2 facilitates ion transport and charge transfer: IL-Co(OH)2 shows a higher ion diffusion coefficient (1.06 × 10(-11) cm(2)/s) and lower charge transfer resistance (1.53 Ω) than those of bare Co(OH)2 (2.55 × 10(-12) cm(2)/s and 2.59 Ω). Our density functional theory (DFT) calculations reveal that the IL molecules, consisting of anion and cation groups, enable easier hydrogen desorption/adsorption process, that is, a more favorable redox reaction on the Co(OH)2 surface.
Single-crystalline rock-salt PbS nanowires (NWs) were synthesized using three different routes; the solvothermal, chemical vapor transport, and gas-phase substitution reaction of pregrown CdS NWs. They were uniformly grown with the [100] or [110], [112] direction in a controlled manner. In the solvothermal growth, the oriented attachment of the octylamine (OA) ligands enables the NWs to be produced with a controlled morphology and growth direction. As the concentration of OA increases, the growth direction evolves from the [100] to the higher surface-energy [110] and [112] directions under the more thermodynamically controlled growth conditions. In the synthesis involving chemical vapor transport and the substitution reaction, the use of a lower growth temperature causes the higher surface-energy growth direction to change from [100] to [110]. The high-resolution X-ray diffraction pattern and X-ray photoelectron spectroscopy results revealed that a thinner oxide-layer was produced on the surface of the PbS NWs by the substitution reaction. We fabricated field effect transistors using single PbS NW, which showed intrinsic p-type semiconductor characteristics for all three routes. For the PbS NW with a thinner oxide layer, the carrier mobility was measured to be as high as 10 cm(2) V(-1) s(-1).
Using spinel-type Li(Mn(1.5)Ni(0.5) )O4 with two different cations, Mn and Ni, in the oxygen octahedra as a model system, we show that a cation ordering transition takes place through the formation of Frenkel-type point defects. A series of experimental results based on atomic-scale observations and in situ powder diffractions along with ab initio calculations consistently support such defect-mediated transition behavior. In addition to providing a precise suggestion of the intermediate transient states and the resulting kinetic pathway during the transition between two phases, our findings emphasize the significant role of point defects in ordering transformation of complex oxides.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.