We demonstrate that the power conversion efficiency can be significantly improved in solution-processed small-molecule solar cells by tuning the thickness of the active layer and inserting an optical spacer (ZnO) between the active layer and the Al electrode. The enhancement in light absorption in the cell was measured with UV–vis absorption spectroscopy and by measurements of the photoinduced carriers generation rate. The ZnO layer used to improve the light-harvesting increases the charge collection efficiency, serves as a blocking layer for holes, and reduces the recombination rate. The combined optical and electrical improvements raise the power conversion efficiency of solution-processed small-molecule solar cells to 8.9%, that is, comparable to that of polymer counterparts.

An amino-functionalized conjugated metallopolymer PFEN-Hg was developed as a cathode interlayer for inverted polymer solar cells. The resulting devices exhibited significantly improved performance with power conversion efficiencies exceeding 9%. Moreover, good device performance was achievable with the PFEN-Hg over a wider range of film thickness, likely due to the Hg-Hg interactions and improved π-π stacking.

The ternary strategy, introducing a third component into a binary blend, opens a simple and promising avenue to improve the power conversion efficiency (PCE) of organic solar cells (OSCs). The judicious selection of an appropriate third component, without sacrificing the photocurrent and voltage output of the OSC, is of significant importance in ternary devices. Herein, highly efficient OSCs fabricated using a ternary approach are demonstrated, wherein a novel non‐fullerene acceptor L8‐BO‐F is designed and incorporated into the PM6:BTP‐eC9 blend. The three components show complementary absorption spectra and cascade energy alignment. L8‐BO‐F and BTP‐eC9 are found to form a homogeneous mixed phase, which improves the molecular packing of both the donor and acceptor materials, and optimizes the ternary blend morphology. Moreover, the addition of L8‐BO‐F into the binary blend suppresses the non‐radiative recombination, thus leading to a reduced voltage loss. Consequently, concurrent increases in open‐circuit voltage, short‐circuit current, and fill factor are realized, resulting in an unprecedented PCE of 18.66% (certified value of 18.2%), which represents the highest efficiency values reported for both single‐junction and tandem OSCs so far.

Selective oxidation has an important role in environmental and green chemistry (e.g., oxidative desulfurization of fuels and oxidative removal of mercury) as well as chemicals and intermediates chemistry to obtain high-value-added special products (e.g., organic sulfoxides and sulfones, aldehydes, ketones, carboxylic acids, epoxides, esters, and lactones). Due to their unique physical properties such as the nonvolatility, thermal stability, nonexplosion, high polarity, and temperature-dependent miscibility with water, ionic liquids (ILs) have attracted considerable attention as reaction solvents and media for selective oxidations and are considered as green alternatives to volatile organic solvents. Moreover, for easy separation and recyclable utilization, IL catalysts have attracted unprecedented attention as "biphasic catalyst" or "immobilized catalyst" by immobilizing metal- or nonmetal-containing ILs onto mineral or polymer supports to combine the unique properties of ILs (chemical and thermal stability, capacity for extraction of polar substrates and reaction products) with the extended surface of the supports. This review highlights the most recent outcomes on ILs in several important typical oxidation reactions. The contents are arranged in the series of oxidation of sulfides, oxidation of alcohols, epoxidation of alkenes, Baeyer-Villiger oxidation reaction, oxidation of alkanes, and oxidation of other compounds step by step involving ILs as solvents, catalysts, reagents, or their combinations.