No abstract

According to the evidence from both theoretical calculations and experimental findings, conjugated ladder polymers containing large π-conjugated structure, a high number of nitrogen heteroatoms, and a multiring aromatic system, could be an ideal organic anode candidate for lithium-ion batteries (LIBs). In this report, we demonstrated that the nanostructured polyazaacene analogue poly(1,6-dihydropyrazino[2,3g]quinoxaline-2,3,8-triyl-7-(2H)-ylidene-7,8-dimethylidene) (PQL) shows high performance as anode materials in LIBs: high capacity (1750 mAh g(-1), 0.05C), good rate performance (303 mAh g(-1), 5C), and excellent cycle life (1000 cycles), especially at high temperature of 50 °C. Our results suggest nanostructured conjugated ladder polymers could be alternative electrode materials for the practical application of LIBs.

A multi-redox polyoxometalate-based hybrid polymer has been demonstrated to show multilevel resistive switching memory behaviors.

Electronic skin (e‐skin), an important part toward the realization of artificial intelligence, has been developing through comprehending, mimicking, and eventually outperforming skin in some aspects. Most of the e‐skin substrates are flexible polymers, such as polydimethylsiloxane (PDMS). Although PDMS was found to be biocompatible, it is not suitable for long‐time wearing due to its air impermeability. This study reports a simple and designable leather based e‐skin by merging the natural sophisticated structure and wearing comfort of leather with the multifunctional properties of nanomaterials. The leather based e‐skin could make leather, “the dead skin,” repurposed for its sensing capabilities. This e‐skin can be applied in flexible pressure sensors, displays, user‐interactive devices, etc. It provides a new class of materials for the development of multifunctional e‐skin to mimic or even outshine the functions of real skin.

Stretchability plays an important role in wearable devices. Repeated stretching often causes the conductivity dramatically decreasing due to the damage of the inner conductive layer, which is a fatal and undesirable issue in this field. Herein, a convenient rolling strategy to prepare conductive fibers with high stretchability based on a spiral structure is proposed. With the simple rolling design, low resistance change can be obtained due to confined elongation nof the gold thin‐film cracks, which is caused by the encapsulated effect in such a structure. When the fiber is under 50% strain, the resistance change (R/R0) is about 1.5, which is much lower than a thin film at the same strain (R/R0 ≈ 10). The fiber can even afford a high load strain (up to 100%), but still retain good conductivity. Such a design further demonstrates its capability when it is used as a conductor to confirm signal transfer with low attenuation, which can also be woven into textile to fabricate wearable electronics.