A novel organometal halide perovskite (CH3NH3PbI2Br) is synthesized and used as a visible light absorber to sensitize one-dimensional (1D) TiO2 nanowire arrays (NWAs) for all-solid-state hybrid solar cells. It achieved a power conversion efficiency (PCE) of 4.87% and an open circuit voltage (Voc) of 0.82 V, both higher than those of its analogue CH3NH3PbI3.
With a view to developing flexible solid-state asymmetric supercapacitors, we have specially designed and nanoscopically engineered two types of electrodes: a MnO 2 /ZnO core-shell nanorod array and a HIreduced graphene oxide assembly, both deposited in situ on a carbon cloth. These materials were thoroughly characterized by structural and spectroscopic techniques. The flexible solid-state asymmetric supercapacitors with cathodes and anodes made of these materials have demonstrated superior performance characteristics. They can be cycled in a wide potential window of 0-1.8 V for 5000 cycles with only 1.5% capacitance loss. The demonstrated volumetric energy density of 0.234 mW h cm À3 and volumetric power density of 0.133 W cm À3 are much higher than those of similar devices reported previously in the literature.
In this work, we have succeeded in preparing rutile and anatase TiO2 mesoporous single crystals with diverse morphologies in a controllable fashion by a simple silica-templated hydrothermal method. A simple in-template crystal growth process was put forward, which involved heterogeneous crystal nucleation and oriented growth within the template, a sheer spectator, and an excluded volume, i.e., crystal growth by faithful negative replication of the silica template. A series of mesoporous single-crystal structures, including rutile mesoporous TiO2 nanorods with tunable sizes and anatase mesoporous TiO2 nanosheets with dominant {001} facets, have been synthesized to demonstrate the versatility of the strategy. The morphology, size, and phase of the TiO2 mesoporous single crystals can be tuned easily by varying the external conditions such as the hydrohalic acid condition, seed density, and temperature rather than by the silica template, which merely serves for faithful negative replication but without interfering in the crystallization process. To demonstrate the application value of such TiO2 mesoporous single crystals, photocatalytic activity was tested. The resultant TiO2 mesoporous single crystals exhibited remarkable photocatalytic performance on hydrogen evolution and degradation of methyl orange due to their increased surface area, single-crystal nature, and the exposure of reactive crystal facets coupled with the three-dimensionally connected mesoporous architecture. It was found that {110} facets of rutile mesoporous single crystals can be considered essentially as reductive sites with a key role in the photoreduction, while {001} facets of anatase mesoporous single crystals provided oxidation sites in the oxidative process. Such shape- and size-controlled rutile and anatase mesoporous TiO2 single crystals hold great promise for building energy conversion devices, and the simple solution-based hydrothermal method is extendable to the synthesis of other mesoporous single crystals beyond TiO2.
We present a two-step electrochemical deposition process to synthesize hierarchical zinc oxide (ZnO) nanorod-nanosheet structures on indium tin oxide (ITO) substrate, which involves electrodeposition of ZnO nanosheet arrays on the conductive glass substrate, followed by electrochemical growth of secondary ZnO nanorods on the backbone of the primary ZnO nanosheets. The formation mechanism of the hierarchical nanostructure is discussed. It is demonstrated that annealing treatment of the primary nanosheets synthesized by the first-step deposition process plays a key role in synthesizing the hierarchical nanostructure. Photovoltaic properties of dye-sensitized solar cells (DSSCs) based on hierarchical ZnO nanostructures are investigated. The hierarchical ZnO nanorod-nanosheet DSSC exhibits improved device performance compared to the DSSC constructed using photoelectrode of bare ZnO nanosheet arrays. The improvement can be attributed to the enhanced dye loading, which is caused by the enlargement of internal surface area within the nanostructure photoelectrode. Furthermore, we perform a parametric study to determine the optimum geometric dimensions of the hierarchical ZnO nanorod-nanosheet photoelectrode through adjusting the preparation conditions of the first- and second-step deposition process. By utilizing a hierarchical nanostructure photoelectrode with film thickness of about 7 μm, the DSSC with an open-circuit voltage of 0.74 V and an overall power conversion efficiency of 3.12% is successfully obtained.
Semiconductor-sensitized solar cell (SSSC) represents a new generation of device aiming to achieve easy fabrication and cost-effective performance. However, the power of the semiconductor sensitizers has not been fully demonstrated in SSSC, making it actually overshadowed by dye-sensitized solar cell (DSSC). At least part of the problem is related to the inefficient charge separation and severe recombination with the current technologies, which calls on rethinking about how to better engineer the semiconductor sensitizer structure in order to enhance the power conversion efficiency (PCE). Herein we report on using for the first time a quasi-quantum well (QW) structure (ZnSe/CdSe/ZnSe) as the sensitizer, which is quasi-epitaxially deposited on ZnO tetrapods. Such a novel photoanode architecture has attained 6.20% PCE, among the highest reported to date for this type of SSSCs. Impedance spectra have revealed that the ZnSe/CdSe/ZnSe QW structure has a transport resistance only a quarter that of, but a recombination resistance twice that of the ZnSe/CdSe heterojunction (HJ) structure, yielding much longer electron diffusion length, consistent with the resulting higher photovoltage, photocurrent, and fill factor. Time-resolved photoluminescence spectroscopy indicates dramatically reduced electron transfer from ZnO to the QW sensitizer, a feature which is conducive to charge separation and collection. This study together with the impedance spectra and intensity modulated photocurrent spectroscopies supports a core/shell two-channel transport mechanism in this type of solar cells and further suggests that the electron transport along sensitizer can be considerably accelerated by the QW structure employed.
Porous modification is a general approach to endowing the rigid inorganic thermoelectric (TE) materials with considerable flexibility, however, by which the TE performances are severely sacrificed. Thus, there remains an ongoing struggle against the trade-off between TE properties and flexibility. Herein, we develop a novel strategy to combine BiTe thick film with ubiquitous cellulose fibers (CFs) via an unbalanced magnetron sputtering technique. Owing to the nano-micro hierarchical porous structures and the excellent resistance to crack propagation of the BiTe/CF architectures, the obtained sample with a nominal BiTe deposition thickness of tens of micrometers exhibits excellent mechanically reliable flexibility, of which the bending deformation radius could be as small as a few millimeters. Furthermore, the BiTe/CF with rational internal resistance and tailorable shapes and dimensions are successfully fabricated for practical use in TE devices. Enhanced Seebeck coefficients are observed in the BiTe/CF as compared to the dense BiTe films, and the lattice thermal conductivity is remarkably reduced due to the strong phonon scattering effect. As a result, the TE figure of merit, ZT, is achieved as high as ∼0.38 at 473 K, which competes with the best flexible TEs and can be further improved by optimizing the carrier concentrations. We believe this developed technique not only opens up a new window to engineer flexible TE materials for practical applications but also promotes the robust development of the fields, such as paper-based flexible electronics and thin-film electronics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.