Um método eletroanalítico original e rápido para a determinação de naproxeno em formulações farmacêuticas usando análise por injeção em batelada (BIA) com detecção amperométrica pulsada é descrito. Eletrodo de carbono vítreo foi usado como eletrodo de trabalho e solução tampão fosfato 0,05 mol L -1 como eletrólito suporte. O método amperométrico envolveu a aplicação contínua de dois pulsos de potencial ao eletrodo de trabalho com intuito de detectar naproxeno pela sua oxidação eletroquímica (+1,5 V por 200 ms) e de limpar a superfície do eletrodo de produtos de adsorção (+1,0 V por 100 ms), evitando contaminação do eletrodo. O método proposto possui várias vantagens para análises de rotina, incluindo: baixo desvio padrão relativo (3,0%, n = 10), elevada frequência analítica (90 h -1 ), exatidão satisfatória (baseado em determinações comparativas por espectrofluorimetria) e baixo limite de detecção (0,3 µmol L -1 ).A novel and fast electroanalytical method for naproxen determination in pharmaceutical formulations using batch injection analysis (BIA) with pulsed amperometric detection is described. Bare glassy carbon electrode was used as working electrode and 0.05 mol L -1 phosphate buffer solution as supporting electrolyte. The amperometric method involved the continuous application of two sequential potential pulses to the working electrode in order to detect naproxen by its electrochemical oxidation (+1.5 V for 200 ms) and to clean the electrode surface from adsorption products (+1.0 V for 100 ms), avoiding electrode contamination. The proposed method has several advantages for routine analysis, including: a low relative standard deviation between injections (3.0%, n = 10), high analytical frequency (90 h -1 ), satisfactory accuracy (based on comparative determinations by spectrofluorimetry) and low limit of detection (0.3 µmol L -1 ).Keywords: batch injection analysis, multiple-pulse amperometry, non-steroidal antiinflammatory drug IntroductionNaproxen, 2-(6-methoxynaphthalen-2-yl) propanoic acid, is a non-steroidal anti-inflammatory drug (NSAID) derived from propionic acid and has been widely used as an over-the-counter analgesic, anti-inflammatory and antipyretic agent. It is also commonly used for the reduction of stiffness caused by conditions including kidney stones, rheumatoid arthritis and other inflammatory rheumatic diseases. 1,2 NSAIDs have been associated with the increasing number of potentially cardiovascular events. However, a recent study classified naproxen as the least harmful NSAID in cardiovascular terms. 3 Different analytical methods have been proposed for the determination of naproxen in pharmaceutical formulations including spectrophotometry (UV region), 4,5 spectrofluorimetry, 6-8 capillary isotachophoresis 9 and high-performance liquid-chromatography (HPLC) coupled with spectrophotometric, 10 amperometric 11 and mass spectrometric detectors. 1 Nevertheless, these analytical methods require expensive equipment and reagents, are time-consuming and often necessitate laborious pre-and pos...

The 3D printing (or additive manufacturing, AM) technology is capable to provide a quick and easy production of objects with freedom of design, reducing waste generation. Among the AM techniques, fused deposition modeling (FDM) has been highlighted due to its affordability, scalability, and possibility of processing an extensive range of materials (thermoplastics, composites, biobased materials, etc.). The possibility of obtaining electrochemical cells, arrays, pieces, and more recently, electrodes, exactly according to the demand, in varied shapes and sizes, and employing the desired materials has made from 3D printing technology an indispensable tool in electroanalysis. In this regard, the obtention of an FDM 3D printer has great advantages for electroanalytical laboratories, and its use is relatively simple. Some care has to be taken to aid the user to take advantage of the great potential of this technology, avoiding problems such as solution leakages, very common in 3D printed cells, providing well-sealed objects, with high quality. In this sense, herein, we present a complete protocol regarding the use of FDM 3D printers for the fabrication of complete electrochemical systems, including (bio)sensors, and how to improve the quality of the obtained systems. A guide from the initial printing stages, regarding the design and structure obtention, to the final application, including the improvement of obtained 3D printed electrodes for different purposes, is provided here. Thus, this protocol can provide great perspectives and alternatives for 3D printing in electroanalysis and aid the user to understand and solve several problems with the use of this technology in this field.

No abstract

No abstract

This article highlights the potential use of multi‐walled carbon‐nanotube modified screen‐printed electrodes (SPEs) for the amperometric sensing of ciprofloxacin and compares the association of batch‐injection analysis (BIA) and flow‐injection analysis (FIA) with amperometric detection. Both analytical systems provided precise (RSD<5 %) and sensitive determination of ciprofloxacin (LOD<0.1 μmol L−1) within wide linear range (up to 200 μmol L−1). Accuracy of both methods was attested by recovery values (93–107 %) and comparison with capillary electrophoresis. The BIA system is completely portable (especially due to association with SPEs) and provided faster analyses (130 h−1) and more sensitive detection than the FIA system due to the higher flow rates of injection.

No abstract

No abstract

No abstract