Band gap opening and engineering is one of the high priority goals in the development of graphene electronics. Here, we report on the opening and scaling of band gap in BN doped graphene (BNG) films grown by low-pressure chemical vapor deposition method. High resolution transmission electron microscopy is employed to resolve the graphene and h-BN domain formation in great detail. X-ray photoelectron, micro-Raman, and UV-vis spectroscopy studies revealed a distinct structural and phase evolution in BNG films at low BN concentration. Synchrotron radiation based XAS-XES measurements concluded a gap opening in BNG films, which is also confirmed by field effect transistor measurements. For the first time, a significant band gap as high as 600 meV is observed for low BN concentrations and is attributed to the opening of the π-π* band gap of graphene due to isoelectronic BN doping. As-grown films exhibit structural evolution from homogeneously dispersed small BN clusters to large sized BN domains with embedded diminutive graphene domains. The evolution is described in terms of competitive growth among h-BN and graphene domains with increasing BN concentration. The present results pave way for the development of band gap engineered BN doped graphene-based devices.

In this article, we demonstrate a semitransparent inverted-type polymer solar cell using a top laminated graphene electrode without damaging the underlying organic photoactive layer. The lamination process involves the simultaneous thermal releasing deposition of the graphene top electrode during thermal annealing of the photoactive layer. The resulting semitransparent polymer solar cell exhibits a promising power conversion efficiency of approximately 76% of that of the standard opaque device using an Ag metal electrode. The asymmetric photovoltaic performances of the semitransparent solar cell while illuminated from two respective sides were further analyzed using optical simulation and photocarrier recombination measurement. The devices consisting of the top laminated transparent graphene electrode enable the feasible roll-to-roll manufacturing of low-cost semitransparent polymer solar cells and can be utilized in new applications such as power-generated windows or multijunction or bifacial photovoltaic devices.

Quantitative mapping of layer number and stacking order for CVD-grown graphene layers is realized by formulating Raman fingerprints obtained on two stepwise stacked graphene single-crystal domains with AB Bernal and turbostratic stacking (with ~30°interlayer rotation), respectively. The integrated peak area ratio of the G band to the Si band, A(G)/A(Si), is proven to be a good fingerprint for layer number determination, while the area ratio of the 2D and G bands, A(2D)/A(G), is shown to differentiate effectively between the two different stacking orders. The two fingerprints are well formulated and resolve, quantitatively, the layer number and stacking type of various graphene domains that used to rely on tedious transmission electron microscopy for structural analysis. The approach is also noticeable in easy discrimination of the turbostratic graphene region (~30° rotation), the structure of which resembles the well known high-mobility graphene R30/R2(±) fault pairs found on the vacuum-annealed C-face SiC and suggests an electron mobility reaching 14,700 cm(3) V(-1) s(-1). The methodology may shed light on monitoring and control of high-quality graphene growth, and thereby facilitate future mass production of potential high-speed graphene applications.