No abstract

A potential risk of sperm dysfunction should be considered for workers occupationally exposed to high levels of PAHs. Cigarette smoking may aggravate this risk. Urinary 1-OHP can be used as a biomarker predicting sperm dysfunction.

Recently, ionic liquids were verified to be combustible instead of nonflammable; the contrary was thought to be true due their extremely low vapor pressure. Flash point is one of the most important variables used to characterize the fire and explosion hazards of liquids. Because of extremely low vapor pressure and decomposition at elevated temperatures, the reason for ionic liquids to be combustible should be different from that of traditionally defined liquids. The flash point of ionic liquids in relation to their decomposition was investigated in this study by the estimation of vapor pressure and by use of thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and flash point analyzer apparatus. The ionic liquids 1-ethyl-3-methylimidazolium ethylsulfate () and 1-butyl-3methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf 2 ]), were selected as test examples. Results revealed that the flammability of ionic liquids was mainly attributed to the decomposition of the ionic liquids generating flammable substances instead of themselves vaporizing, as do traditionally defined combustible/flammable liquids. Lyon's method, applied by Fox et al. to estimate the flash point of ionic liquids from the TGA decomposition temperature, was assessed using our experimental data and the data from the published literature and resulted in substantial overestimation of the flash-point values of ionic liquids, which underestimates the fire and explosion hazards of ionic liquids. This deviation is attributed to flash-point values of ionic liquids located in the second temperature range of the TGA tracing, rather than in the third analogue, as predicted by Lyon's method.

Oxidative degradation of commercial grade ABS (Acrylonitrile-butadienestyrene) resin powders was studied by thermal analysis. The instabilities of ABS containing different polybutadiene (PB) contents with respect to temperature were studied by Differential Scanning Calorimeter (DSC). Thermograms of isothermal test and dynamic scanning were performed. Three exothermic peaks were observed and related to auto-oxidation, degradation and oxidative decomposition, respectively. Onset temperature of the auto-oxidation was determined to be around 193 °C. However, threshold temperature of oxidation was found to be as low as 140 °C by DSC isothermal testing. Another scan of the powder after degeneration in air showed an onset temperature of 127 °C. Reactive hazards of ABS powders were verified to be the exothermic oxidation of unsaturated PB domains, not the SAN (poly(styrene-acrylonitrile)) matrix. Heat of oxidation was first determined to be 2,800  40 J per gram of ABS or 4,720  20 J per gram of PB. Thermal hazards of processing ABS powder are assessed by adiabatic temperature rise at process conditions. IR spectroscopy associated with heat of oxidation OPEN ACCESSPolymers 2010, 2 175 verified the oxidative mechanism, and these evidences excluded the heat source from the degradation of SAN. A specially prepared powder of ABS without adding anti-oxidant was analyzed by DSC for comparing the exothermic behaviors. Exothermic onset temperatures were determined to be 120 °C and 80 °C by dynamic scanning and isothermal test, respectively. The assessment successfully explained fires and explosions in an ABS powder dryer and an ABS extruder.

No abstract