An evolvable organic electrochemical transistor (OECT), operating in the hybrid accumulation–depletion mode is reported, which exhibits short‐term and long‐term memory functionalities. The transistor channel, formed by an electropolymerized conducting polymer, can be formed, modulated, and obliterated in situ and under operation. Enduring changes in channel conductance, analogous to long‐term potentiation and depression, are attained by electropolymerization and electrochemical overoxidation of the channel material, respectively. Transient changes in channel conductance, analogous to short‐term potentiation and depression, are accomplished by inducing nonequilibrium doping states within the transistor channel. By manipulating the input signal, the strength of the transistor response to a given stimulus can be modulated within a range that spans several orders of magnitude, producing behavior that is directly comparable to short‐ and long‐term neuroplasticity. The evolvable transistor is further incorporated into a simple circuit that mimics classical conditioning. It is forecasted that OECTs that can be physically and electronically modulated under operation will bring about a new paradigm of machine learning based on evolvable organic electronics.
The rise of n-type organic electrochemical transistors (OECTs): from materials to applications.
Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio-integration potential. Here, we report the first organic electrochemical neurons (OECNs) with ion-modulated spiking, based on all-printed complementary organic electrochemical transistors. We demonstrate facile bio-integration of OECNs with Venus Flytrap (Dionaea muscipula) to induce lobe closure upon input stimuli. The OECNs can also be integrated with all-printed organic electrochemical synapses (OECSs), exhibiting short-term plasticity with paired-pulse facilitation and long-term plasticity with retention >1000 s, facilitating Hebbian learning. These soft and flexible OECNs operate below 0.6 V and respond to multiple stimuli, defining a new vista for localized artificial neuronal systems possible to integrate with bio-signaling systems of plants, invertebrates, and vertebrates.
DNA-incorporating hydrophobic moieties can be synthesized by either solid-phase or solution-phase coupling. On a solid support the DNA is protected, and hydrophobic units are usually attached employing phosphoramidite chemistry involving a DNA synthesizer. On the other hand, solution coupling in aqueous medium results in low yields due to the solvent incompatibility of DNA and hydrophobic compounds. Hence, the development of a general coupling method for producing amphiphilic DNA conjugates with high yield in solution remains a major challenge. Here, we report an organic-phase coupling strategy for nucleic acid modification and polymerization by introducing a hydrophobic DNA-surfactant complex as a reactive scaffold. A remarkable range of amphiphile-DNA structures (DNA-pyrene, DNA-triphenylphosphine, DNA-hydrocarbon, and DNA block copolymers) and a series of new brush-type DNA side-chain homopolymers with high DNA grafting density are produced efficiently. We believe that this method is an important breakthrough in developing a generalized approach to synthesizing functional DNA molecules for self-assembly and related technological applications.
3D printing is seen as a game‐changing manufacturing process in many domains, including general medicine and dentistry, but the integration of more complex functions into 3D‐printed materials remains lacking. Here, it is expanded on the repertoire of 3D‐printable materials to include antimicrobial polymer resins, which are essential for development of medical devices due to the high incidence of biomaterial‐associated infections. Monomers containing antimicrobial, positively charged quaternary ammonium groups with an appended alkyl chain are either directly copolymerized with conventional diurethanedimethacrylate/glycerol dimethacrylate (UDMA/GDMA) resin components by photocuring or prepolymerized as a linear chain for incorporation into a semi‐interpenetrating polymer network by light‐induced polymerization. For both strategies, dental 3D‐printed objects fabricated by a stereolithography process kill bacteria on contact when positively charged quaternary ammonium groups are incorporated into the photocurable UDMA/GDMA resins. Leaching of quaternary ammonium monomers copolymerized with UDMA/GDMA resins is limited and without biological consequences within 4–6 d, while biological consequences could be confined to 1 d when prepolymerized quaternary ammonium group containing chains are incorporated in a semi‐interpenetrating polymer network. Routine clinical handling and mechanical properties of the pristine polymer matrix are maintained upon incorporation of quaternary ammonium groups, qualifying the antimicrobially functionalized, 3D‐printable composite resins for clinical use.
We have fabricated a potentially generalizable electrochemical peptide-based (E-PB) sensor for the detection of HIV anti-p24 antibodies. The E-PB sensor is sensitive, specific and fares well even when challenged in a realistically complex medium such as human urine proxy.
Analysis techniques are needed to determine the quantity and structure of materials composing an organic layer that is below an ultra-thin film limit and in a liquid environment. Neither optical nor acoustical techniques can independently distinguish between thickness and porosity of ultra-thin films due to parameter correlation. A combined optical and acoustical approach yields sufficient information to determine both thickness and porosity. We describe application of the combinatorial approach to measure single or multiple organic layers when the total layer thickness is small compared to the wavelength of the probing light. The instrumental setup allows for simultaneous in situ spectroscopic ellipsometry and quartz crystal microbalance dynamic measurements, and it is combined with a multiple-inlet fluid control system for different liquid solutions to be introduced during experiments. A virtual separation approach is implemented into our analysis scheme, differentiated by whether or not the organic adsorbate and liquid ambient densities are equal. The analysis scheme requires that the film be assumed transparent and rigid (non-viscoelastic). We present and discuss applications of our approach to studies of organic surfactant adsorption, self-assembled monolayer chemisorption, and multiple-layer target DNA sensor preparation and performance testing.
The conjugated oligomer ETE-S is enzymatically polymerized in vitro, in the presence of peroxidase and H2O2. This polymerization route occurs also in the plant cell wall where ETE-S polymerizes and forms conductors along the plant structure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.