No abstract

No abstract

No abstract

Oil palm empty fruit bunches (EFB) and silica fume (SF) are the by-products of the oil palm plantation and the ferroalloy smelting industries, respectively. Improper disposal of these materials leads to negative implication to the environment. This study was carried out to investigate the potential application of EFB and SF in cement bricks. EFB fibre and SF replaced up to 25% of sand and cement in the mix, respectively, in several groups of specimens that distinguished the normal, EFB-, SF- and EFB-SF-cement bricks. The specimens were tested for the compressive strength, density and water absorption property. The results reveal that SF, at an optimum amount of 10% cement replacement, increased 10% of the strength of the cement brick. EFB fibre reduced the strength and density but increased water absorption property of the cement brick. For application in the construction industry, SF and EFB fibre contents should be kept within 10% and 20% respectively.

This paper presents an experimental study of a new grouted splice connection for wall panels, called Welded Bar Sleeve (WBS). The connections were made from steel pipes and tested with incremental tensile, shear and flexural loads until failure. The aim is to determine the behaviour of the connection under the three load cases. For this, the connections are evaluated in terms of the load-displacement responses, ultimate capacities, ductility responses and some feasibility assessment criteria. WBS was found to provide sufficient strength at the bar embedded length of 8, 8 and 11 times the bar diameter under tensile, shear and flexural loads, respectively. It is effective under tension, but could only service up to 1/3 of its ultimate shear capacity. Flexural load is the most critical load case for the connection. For this, further enhancements are required when subjected to shear and flexural loads.