We report an efficient synthesis of copper indium sulfide nanocrystals with strong photoluminescence in the visible to near-infrared. This method can produce gram quantities of material with a chemical yield in excess of 90% with minimal solvent waste. The overgrowth of as-prepared nanocrystals with a few monolayers of CdS or ZnS increases the photoluminescence quantum efficiency to > 80%. On the basis of time-resolved spectroscopic studies of core/shell particles, we conclude that the emission is due to an optical transition that couples a quantized electron state to a localized hole state, which is most likely associated with an internal defect.

Impurity doping has been widely used to endow semiconductor nanocrystals with novel optical, electronic, and magnetic functionalities. Here, we introduce a new family of doped NCs offering unique insights into the chemical mechanism of doping, as well as into the fundamental interactions between the dopant and the semiconductor host. Specifically, by elucidating the role of relative bond strengths within the precursor and the host lattice, we develop an effective approach for incorporating manganese (Mn) ions into nanocrystals of lead-halide perovskites (CsPbX, where X = Cl, Br, or I). In a key enabling step not possible in, for example, II-VI nanocrystals, we use gentle chemical means to finely and reversibly tune the nanocrystal band gap over a wide range of energies (1.8-3.1 eV) via postsynthetic anion exchange. We observe a dramatic effect of halide identity on relative intensities of intrinsic band-edge and Mn emission bands, which we ascribe to the influence of the energy difference between the corresponding transitions on the characteristics of energy transfer between the Mn ion and the semiconductor host.

The field of nanocrystal quantum dots (QDs) is already more than 30 years old, and yet continuing interest in these structures is driven by both the fascinating physics emerging from strong quantum confinement of electronic excitations, as well as a large number of prospective applications that could benefit from the tunable properties and amenability toward solution-based processing of these materials. The focus of this review is on recent advances in nanocrystal research related to applications of QD materials in lasing, light-emitting diodes (LEDs), and solar energy conversion. A specific underlying theme is innovative concepts for tuning the properties of QDs beyond what is possible via traditional size manipulation, particularly through heterostructuring. Examples of such advanced control of nanocrystal functionalities include the following: interface engineering for suppressing Auger recombination in the context of QD LEDs and lasers; Stokes-shift engineering for applications in large-area luminescent solar concentrators; and control of intraband relaxation for enhanced carrier multiplication in advanced QD photovoltaics. We examine the considerable recent progress on these multiple fronts of nanocrystal research, which has resulted in the first commercialized QD technologies. These successes explain the continuing appeal of this field to a broad community of scientists and engineers, which in turn ensures even more exciting results to come from future exploration of this fascinating class of materials.

Development of light-emitting diodes (LEDs) based on colloidal quantum dots is driven by attractive properties of these fluorophores such as spectrally narrow, tunable emission and facile processibility via solution-based methods. A current obstacle towards improved LED performance is an incomplete understanding of the roles of extrinsic factors, such as non-radiative recombination at surface defects, versus intrinsic processes, such as multicarrier Auger recombination or electron-hole separation due to applied electric field. Here we address this problem with studies that correlate the excited state dynamics of structurally engineered quantum dots with their emissive performance within LEDs. We find that because of significant charging of quantum dots with extra electrons, Auger recombination greatly impacts both LED efficiency and the onset of efficiency roll-off at high currents. Further, we demonstrate two specific approaches for mitigating this problem using heterostructured quantum dots, either by suppressing Auger decay through the introduction of an intermediate alloyed layer, or by using an additional shell that impedes electron transfer into the quantum dot to help balance electron and hole injection.

Infrared-emitting nanocrystal quantum dots (NQDs) have enormous potential as an enabling technology for applications ranging from tunable infrared lasers to biological labels. Notably, lead chalcogenide NQDs, especially PbSe NQDs, provide efficient emission over a large spectral range in the infrared, but their application has been limited by instability in emission quantum yield and peak position on exposure to ambient conditions. Conventional methods for improving NQD stability by applying a shell of a more stable, wider band gap semiconductor material are frustrated by the tendency of lead chalcogenide NQDs toward Ostwald ripening at even moderate reaction temperatures. Here, we describe a partial cation-exchange method in which we take advantage of this lability to controllably synthesize PbSe/CdSe core/shell NQDs. Critically, these NQDs are stable against fading and spectral shifting. Further, these NQDs can undergo additional shell growth to produce PbSe/CdSe/ZnS core/shell/shell NQDs that represent initial steps toward bright, biocompatible near-infrared optical labels.

One consequence of strong spatial confinement of electronic wave functions in semiconductor nanocrystals (NCs) is a significant enhancement in carrier-carrier Coulomb interactions. This effect leads to a number of novel physical phenomena including ultrafast decay of multiple electron-hole pairs (multiexcitons) by Auger recombination and high-efficiency generation of mutiexcitons by single photons via carrier multiplication (CM). Significant recent interest in multiexciton phenomena in NCs has been stimulated by studies of NC lasing, as well as potential applications of CM in solar-energy conversion. The focus of this Account is on CM. In this process, the kinetic energy of a "hot" electron (or a "hot" hole) does not dissipate as heat but is, instead, transferred via the Coulomb interaction to the valence-band electron, exciting it across the energy gap. Because of restrictions imposed by energy and translational-momentum conservation, as well as rapid energy loss due to phonon emission, CM is inefficient in bulk semiconductors, particularly at energies relevant to solar energy conversion. On the other hand, the CM efficiency can potentially be enhanced in zero-dimensional NCs because of factors such as a wide separation between discrete electronic states, which inhibits phonon emission ("phonon bottleneck"), enhanced Coulomb interactions, and relaxation in translational-momentum conservation. Here, we investigate CM in PbSe NCs by applying time-resolved photoluminescence and transient absorption. Both techniques show clear signatures of CM with efficiencies that are in good agreement with each other. NCs of the same energy gap show moderate batch-to-batch variations (within approximately 30%) in apparent multiexciton yields and larger variations (more than a factor of 3) due to differences in sample conditions (stirred vs static solutions). These results indicate that NC surface properties may affect the CM process. They also point toward potential interference from extraneous effects such as NC photoionization that can distort the results of CM studies. CM yields measured under conditions when extraneous effects are suppressed via intense sample stirring and the use of extremely low pump levels (0.02-0.03 photons absorbed per NC per pulse) reveal that both the electron-hole creation energy and the CM threshold are reduced compared with those in bulk solids. These results indicate a confinement-induced enhancement in the CM process in NC materials. Further optimization of CM performance should be possible by utilizing more complex (for example, shaped-controlled or heterostructured) NCs that allow for facile manipulation of carrier-carrier interactions, as well as single and multiexciton energies and dynamics.

The influence of a CdSexS1-x interfacial alloyed layer on the photophysical properties of core/shell CdSe/CdS nanocrystal quantum dots (QDs) is investigated by comparing reference QDs with a sharp core/shell interface to alloyed structures with an intermediate CdSexS1-x layer at the core/shell interface. To fully realize the structural contrast, we have developed two novel synthetic approaches: a method for fast CdS-shell growth, which results in an abrupt core/shell boundary (no intentional or unintentional alloying), and a method for depositing a CdSexS1-x alloy layer of controlled composition onto the CdSe core prior to the growth of the CdS shell. Both types of QDs possess similar size-dependent single-exciton properties (photoluminescence energy, quantum yield, and decay lifetime). However the alloyed QDs show a significantly longer biexciton lifetime and up to a 3-fold increase in the biexciton emission efficiency compared to the reference samples. These results provide direct evidence that the structure of the QD interface has a significant effect on the rate of nonradiative Auger recombination, which dominates biexciton decay. We also observe that the energy gradient at the core-shell interface introduced by the alloyed layer accelerates hole trapping from the shell to the core states, which results in suppression of shell emission. This comparative study offers practical guidelines for controlling multicarrier Auger recombination without a significant effect on either spectral or dynamical properties of single excitons. The proposed strategy should be applicable to QDs of a variety of compositions (including, e.g., infrared-emitting QDs) and can benefit numerous applications from light emitting diodes and lasers to photodetectors and photovoltaics.

Charged exciton states commonly occur both in spectroscopic studies of quantum dots (QDs) and during operation of QD-based devices. The extra charge added to the neutral exciton modifies its radiative decay rate and also opens an additional nonradiative pathway associated with an Auger process whereby the recombination energy of an exciton is transferred to the excess charge. Here we conduct single-dot spectroscopic studies of Auger recombination in thick-shell ("giant") CdSe/CdS QDs with and without an interfacial alloy layer using time-tagged, time-correlated single-photon counting. In photoluminescence (PL) intensity trajectories of some of the dots, we resolve three distinct states of different emissivities ("bright", "gray", and "dark") attributed, respectively, to the neutral exciton and negative and positive trions. Simultaneously acquired PL lifetime trajectories indicate that the positive trion is much shorter lived than the negative trion, which can be explained by a high density of valence band states and a small hole localization radius (defined by the QD core size), factors that favor an Auger process involving intraband excitation of a hole. A comparison of trion and biexciton lifetimes suggests that the biexciton Auger decay can be treated in terms of a superposition of two independent channels associated with positive- and negative-trion pathways. The resulting interdependence between Auger time constants might simplify the studies of multicarrier recombination by allowing one, for example, to infer Auger lifetimes of trions of one sign based on the measurements of biexciton decay and dynamics of the trions of the opposite sign or, alternatively, estimate the biexciton lifetime based on studies of trion dynamics.