We show that nanometer-scale pores in single-layer freestanding graphene can effectively filter NaCl salt from water. Using classical molecular dynamics, we report the desalination performance of such membranes as a function of pore size, chemical functionalization, and applied pressure. Our results indicate that the membrane's ability to prevent the salt passage depends critically on pore diameter with adequately sized pores allowing for water flow while blocking ions. Further, an investigation into the role of chemical functional groups bonded to the edges of graphene pores suggests that commonly occurring hydroxyl groups can roughly double the water flux thanks to their hydrophilic character. The increase in water flux comes at the expense of less consistent salt rejection performance, which we attribute to the ability of hydroxyl functional groups to substitute for water molecules in the hydration shell of the ions. Overall, our results indicate that the water permeability of this material is several orders of magnitude higher than conventional reverse osmosis membranes, and that nanoporous graphene may have a valuable role to play for water purification.
The use of machine learning methods for accelerating the design of crystalline materials usually requires manually constructed feature vectors or complex transformation of atom coordinates to input the crystal structure, which either constrains the model to certain crystal types or makes it difficult to provide chemical insights. Here, we develop a crystal graph convolutional neural networks (CGCNN) framework to directly learn material properties from the connection of atoms in the crystal, providing a universal and interpretable representation of crystalline materials. Our method provides a highly accurate prediction of DFT calculated properties for 8 different properties of crystals with various structure types and compositions after trained with 10 4 data points. Further, our framework is interpretable because one can extract the contributions from local chemical environments to global properties. Using an example of perovskites, we show how this information can be utilized to discover empirical rules for materials design.
Graphene and monolayer transition metal dichalcogenides (TMDs) are promising materials for next-generation ultrathin optoelectronic devices. Although visually transparent, graphene is an excellent sunlight absorber, achieving 2.3% visible light absorbance in just 3.3 angstrom thickness. TMD monolayers also hold potential as sunlight absorbers, and may enable ultrathin photovoltaic (PV) devices due to their semi-conducting character. In this work, we show that the three TMD monolayers MoS2, MoSe2, and WS2 can absorb up to 5-10% incident sunlight in a thickness of less than 1 nm, thus achieving 1 order of magnitude higher sunlight absorption than GaAs and Si. We further study PV devices based on just two stacked monolayers: (1) a Schottky barrier solar cell between MoS2 and graphene and (2) an excitonic solar cell based on a MoS2/WS2 bilayer. We demonstrate that such 1 nm thick active layers can attain power conversion efficiencies of up to similar to 1%, corresponding to approximately 1-3 orders of magnitude higher power densities than the best existing ultrathin solar cells. Our work shows that two-dimensional monolayer materials hold yet untapped potential for solar energy absorption and conversion at the nanoscale
The electronic properties of colloidal quantum dots (QDs) are critically dependent on both QD size and surface chemistry. Modification of quantum confinement provides control of the QD bandgap, while ligand-induced surface dipoles present a hitherto underutilized means of control over the absolute energy levels of QDs within electronic devices. Here, we show that the energy levels of lead sulfide QDs, measured by ultraviolet photoelectron spectroscopy, shift by up to 0.9 eV between different chemical ligand treatments. The directions of these energy shifts match the results of atomistic density functional theory simulations and scale with the ligand dipole moment. Trends in the performance of photovoltaic devices employing ligand-modified QD films are consistent with the measured energy level shifts. These results identify surface-chemistry-mediated energy level shifts as a means of predictably controlling the electronic properties of colloidal QD films and as a versatile adjustable parameter in the performance optimization of QD optoelectronic devices.
Layered semiconductors based on transition-metal chalcogenides usually cross from indirect bandgap in the bulk limit over to direct bandgap in the quantum (2D) limit. Such a crossover can be achieved by peeling off a multilayer sample to a single layer. For exploration of physical behavior and device applications, it is much desired to reversibly modulate such crossover in a multilayer sample. Here we demonstrate that, in a few-layer sample where the indirect bandgap and direct bandgap are nearly degenerate, the temperature rise can effectively drive the system toward the 2D limit by thermally decoupling neighboring layers via interlayer thermal expansion. Such a situation is realized in few-layer MoSe 2 , which shows stark contrast from the well-explored MoS 2 where the indirect and direct bandgaps are far from degenerate. Photoluminescence of few-layer MoSe 2 is much enhanced with the temperature rise, much like the way that the photoluminescence is enhanced due to the bandgap crossover going from the bulk to the quantum limit, offering potential applications involving external modulation of optical properties in 2D semiconductors. The direct bandgap of MoSe 2 , identified at 1.55 eV, may also promise applications in energy conversion involving solar spectrum, as it is close to the optimal bandgap value of single-junction solar cells and photoelechemical devices. KEYWORDS: 2D-Semiconductors, MoSe 2 , MoS 2 , photoluminescence, bandgap, temperature dependence T wo-dimensional (2D) materials have attracted much interest mainly owing to their exotic physical properties that are strikingly different from their three-dimensional (bulk) counterparts. Even though graphene, the most famous member of the 2D material family, possesses extraordinary properties 1 and is readily integrated in various applications, 2−4 the lack of a native bandgap in graphene has led to a broad search for other 2D semiconducting materials. More recently, the transitionmetal dichalcogenide (TMD) semiconductor MoS 2 has been focused on and has shown great potential in the field; singlelayer MoS 2 has been used as an integral part of transistors, 5−8 sensors, 9 and magnetic materials. 10 However, beyond MoS 2 , other layered TMDs offer a large variety of 2D materials with distinct properties.In this work we studied, for the first time, single-layer MoSe 2 mechanically exfoliated onto SiO 2 /Si. 11 Single-layer MoSe 2 displays good thermal stability with a 1.55 eV direct bandgap as determined from photoluminescence (PL) measurements. The PL peak intensity is enhanced dramatically from few-layer to single-layer as a result of the crossover from indirect bandgap in the bulk limit to direct bandgap in the quantum (2D) limit, similar to the behavior of MoS 2 . 12−14 More interestingly, we find that few-layer MoSe 2 flakes posssess a nearly degenerate indirect and direct bandgap, and an increase in temperature can effectively push the system toward the quasi-2D limit by thermally reducing the coupling between the layers. This response in f...
Point defects in semiconductors can trap free charge carriers and localize excitons. The interaction between these defects and charge carriers becomes stronger at reduced dimensionalities, and is expected to greatly influence physical properties of the hosting material. We investigated effects of anion vacancies in monolayer transition metal dichalcogenides as two-dimensional (2D) semiconductors where the vacancies density is controlled by α-particle irradiation or thermal-annealing. We found a new, sub-bandgap emission peak as well as increase in overall photoluminescence intensity as a result of the vacancy generation. Interestingly, these effects are absent when measured in vacuum. We conclude that in opposite to conventional wisdom, optical quality at room temperature cannot be used as criteria to assess crystal quality of the 2D semiconductors. Our results not only shed light on defect and exciton physics of 2D semiconductors, but also offer a new route toward tailoring optical properties of 2D semiconductors by defect engineering.
In the monolayer limit, transition metal dichalcogenides become direct-bandgap, light-emitting semiconductors. The quantum yield of light emission is low and extremely sensitive to the substrate used, while the underlying physics remains elusive. In this work, we report over 100 times modulation of light emission efficiency of these two-dimensional semiconductors by physical adsorption of O2 and/or H2O molecules, while inert gases do not cause such effect. The O2 and/or H2O pressure acts quantitatively as an instantaneously reversible "molecular gating" force, providing orders of magnitude broader control of carrier density and light emission than conventional electric field gating. Physi-sorbed O2 and/or H2O molecules electronically deplete n-type materials such as MoS2 and MoSe2, which weakens electrostatic screening that would otherwise destabilize excitons, leading to the drastic enhancement in photoluminescence. In p-type materials such as WSe2, the molecular physisorption results in the opposite effect. Unique and universal in two-dimensional semiconductors, the effect offers a new mechanism for modulating electronic interactions and implementing optical devices.
Light emission in two-dimensional (2D) transition metal dichalcogenides (TMDs) changes significantly with the number of layers and stacking sequence. While the electronic structure and optical absorption are well understood in 2D-TMDs, much less is known about exciton dynamics and radiative recombination. Here, we show firstprinciples calculations of intrinsic exciton radiative lifetimes at low temperature (4 K) and room temperature (300 K) in TMD monolayers with the chemical formula MX 2 (X = Mo, W, and X = S, Se), as well as in bilayer and bulk MoS 2 and in two MX 2 heterobilayers. Our results elucidate the time scale and microscopic origin of light emission in TMDs. We find radiative lifetimes of a few picoseconds at low temperature and a few nanoseconds at room temperature in the monolayers and slower radiative recombination in bulk and bilayer than in monolayer MoS 2 . The MoS 2 /WS 2 and MoSe 2 /WSe 2 heterobilayers exhibit very long-lived (∼20−30 ns at room temperature) interlayer excitons constituted by electrons localized on the Mo-based and holes on the W-based monolayer. The wide radiative lifetime tunability, together with the ability shown here to predict radiative lifetimes from computations, hold unique potential to manipulate excitons in TMDs and their heterostructures for application in optoelectronics and solar energy conversion. KEYWORDS: Monolayer materials, transition metal dichalcogenides, luminescence, radiative lifetime, excitons, optoelectronics T wo-dimensional (2D) transition metal dichalcogenides (TMDs) are promising materials for ultrathin electronic, optoelectronic, photocatalytic, and photovoltaic devices. 1−8 Out of approximately 40 existing TMDs, 9,10 some have received particular attention due to their semiconducting nature and tunable band gap. In particular, group 6 monolayer TMDs with chemical formula MX 2 (M = Mo, W and X = S, Se) are direct gap semiconductors with relatively intense photoluminescence (PL), while bilayers and thicker multilayers exhibit indirect gap and weaker PL. 1,10−17 The peculiar nature of the excited states has stimulated intense research efforts to investigate exciton dynamics and radiative/nonradiative lifetimes in TMDs. 13,18−24 Recent time-resolved experiments found a range of characteristic times for exciton dynamics in monolayer TMDs, including fast (1−10 ps) recombination attributed to exciton trapping at defects, and slower processes on a 0.1−1 ns time scale interpreted as radiative exciton recombination. 18,20−22 However, the attribution of the observed signals to radiatiave and nonradiative processes can be ambiguous in time-resolved spectroscopies since defects and impurities can modulate the excited state dynamics. In TMDs, the interpretation of time signals and comparison among different experiments is further complicated by the use of micrometer-size flakes where the edges can play a significant role in exciton recombination. This situation has stimulated an ongoing quest for the intrinsic time scale of exciton recombinatio...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.