No abstract

A scalable process for the production of silver nanoparticles that allows for complete conversion of the limiting reactant is analyzed in detail. The kinetics of silver nanoparticle synthesis using citrate reduction are investigated and used for development of a reaction engineering model to facilitate the reactor design. The effect of temperature, pH, concentration and mixing (axial dispersion) on the rates of nucleation and growth are analyzed quantitatively. An approach that considers reaction kinetics coupled with quality of dispersion is developed for reactor design as well as selection of reactor configurations for the synthesis of specific particle sizes. The developed approach has been applied for continuous production of 10-L suspension silver nanoparticles with very narrow particle size distribution.

Continuous‐flow separation and recovery of silver nanoparticles (AgNPs) using an annular centrifugal extractor (ACE) is demonstrated. Separation was achieved at the liquid‐liquid interface based on the balance between centrifugal force and the solubility of the capping agent. A mathematical model is presented to understand the mechanism in greater detail. The separation of poly(vinylpyrrolidone) (PVP)‐coated AgNPs in an ACE using a strong immiscible solvent was performed. The material accumulated at the interface was separated periodically without discontinuing the operation. The method is also suitable for separation of large particles or 1D/2D nanostructures even employing a single annular centrifugal extractor. Stable AgNPs were selected for a detailed antimicrobial activity study.

The effect of interfacial mass transfer on the extent of dispersion in liquid-liquid segmented flow in straight capillaries is studied. In the absence of interfacial mass transfer, dispersion coefficient was seen to go through a minimum with increasing flow rates. In the presence of mass transfer, physicochemical properties of both the phases and slug lengths were seen to vary along the capillary length. The extent of dispersion was always higher in the presence of interfacial mass transfer. The predictions using axial dispersion model deviated noticeably for larger capillaries as the model does not account for varying buoyancy, dynamic contacting, and Marangoni convection. Simulations of a first-order interfacial reaction considering varying slug lengths showed a significant change in optimum operating parameters than the conventional approach. A special case of "drop-on-demand" type of controlled two-phase flow in capillaries was also studied.