Gangguan harmonik keluaran tegangan listrik pada inverter dapat menyebabkan peralatan yang terhubung mengalami kerusakan. Inverter konvensional dengan topologi full bridge menggunakan filter pasif untuk mengatasi gangguan harmonik. Namun, membutuhkan nilai komponen yang cukup besar sehingga menambah biaya dan ruang pada inverter. Topologi multilevel inverter (MLI) menghasilkan keluaran yang cukup baik karena bentuk gelombang tegangan keluaran bertingkat dan dapat mendekati bentuk sinusoidal. Selain itu, dengan menggunakan topologi MLI dapat mereduksi biaya dan ruang dari komponen filter pasif. Cascaded H-Bridge MLI menawarkan kinerja yang baik dengan efesiensi daya yang baik, jumlah level tegangan dua kali dari jumlah Separate DC Source (SDCS) dan mudah untuk di desain. Teknik multicarrier SPWM digunakan sebagai pengontrol saklar daya untuk menghasilkan tegangan keluaran bertingkat. Multicarrier SPWM bekerja dengan membanding gelombang carrier bertingkat dengan sebuah gelombang sinusoidal murni. Filter LC tetap digunakan untuk membantu dalam mengatasi gangguan harmonic. Penelitian ini membuat suatu pemodelan Cascaded H-Bridge MLI dan menguji coba dengan menggunakan software MATLAB. Hasil yang diperoleh memenuhi standard persentase THD yaitu 2,09% untuk tegangan dan arus luaran.
This research aims to control the speed of an induction motor by exploiting changes in the fundamental frequency. The inverter as the main part of the variable frequency driver (VSD) uses the IRFZ44n Mosfet as a power switch with a full bridge topology to convert the DC source to AC power. Fundamental frequency manipulation takes place during the conversion process. The method used is to change the variable fundamental frequency of the SPWM signal generated by the Arduino nano to control the power switch. Experiments are carried out based on two stages, namely simulation, and experiment. The simulation is performed using the Pspice A/D Lite software to take time sample data (HIGH and LOW) at each frequency change of 13Hz, 25Hz, 38Hz, and 50Hz, then the sample data is input on the Arduino nano as an SPWM signal generator to control the power switch. The results of the variable frequency drive test are the frequencies generated to drive the induction motor at 12.50 Hz, 24.04 Hz, 35.71 Hz, and 48.54 Hz at motor speeds from 227.7 to 1359.6 rpm.
Manajemen konsumsi energi listrik bertujuan untuk efesiensi penggunaan peralatan listrik. Oleh karena itu, smart energy meter dibutuhkan untuk memonitoring penggunaan energi listrik dalam memanejemen konsumsi energi listrik. Metode yang digunakan yaitu berbasis pada jaringan internet dengan memanfaatkan platform IoT Blynk untuk menampilkan hasil pengukuran energi listrik. NodeMCU ESP8266 berfungsi sebagai perangkat mikrokontroler yang mengambil data dari sensor energi PZEM-004T kemudian mengkoneksikan dan mengirimkan data pada smartphone melalui jaringan WiFi. Hasil Pengujian yang dilakukan pengukuran selama 2247 detik dengan beban kipas angin berdasarkan perubahan kecepatan. Smart energy meter berfungsi dengan baik dan mampu mendeteksi terjadinya perubahan beban berdasarkan variable tegangan, arus, daya dan energy. Tegangan rata- rata yang di peroleh yaitu 225 V dengan arus sebesar 0,16 A untuk beban dengan kecepatan sedang dan arus sebesar 0,18 A untuk beban dengan kecepatan maksimal, Daya maksimum yaitu 40,1 W pada saat beban maksimal. Sedangkan konsumsi energi selama pengujian yaitu sebesar 0,04 kWh.
Waninggap Miraf is one of the villages with its main source of income being rice cultivation. Rainfed rice fields are managed by relying on rainwater stored in reservoirs, requiring Alkon pumps to control and supply water. However, operational costs for irrigating the fields have increased due to using oil-based fuels in the Alkon pumps. The implementation of Portable Solar-Powered Submersible Pump Technology (PSTSP) is expected to solve the challenges farmers face. The method utilized is harnessing solar energy as an alternative to oil-based fuels. The dissemination of this technology aims to optimize operational costs and enhance farmers' knowledge of utilizing renewable energy in agriculture. The implementation of this community-driven project involves the participation of the local community in the process of socialization, planning, design, training, and technology application. Based on trial results, this project has successfully increased farmers' knowledge and reduced operational costs by sustaining for up to 4 hours, supplying approximately 12,000 liters of water per hour.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.