Natural superhydrophobic surfaces are often thought to have antibiofouling potential due to their self-cleaning properties. However, when incubated on cicada wings, Pseudomonas aeruginosa cells are not repelled; instead they are penetrated by the nanopillar arrays present on the wing surface, resulting in bacterial cell death. Cicada wings are effective antibacterial, as opposed to antibiofouling, surfaces.
Two-tier micro- and nanoscale quasi-periodic self-organized structures, mimicking the surface of a lotus Nelumbo nucifera leaf, were fabricated on titanium surfaces using femtosecond laser ablation. The first tier consisted of large grainlike convex features between 10 and 20 μm in size. The second tier existed on the surface of these grains, where 200 nm (or less) wide irregular undulations were present. The introduction of the biomimetic surface patterns significantly transformed the surface wettabilty of the titanium surface. The original surface possessed a water contact angle of θ(W) 73 ± 3°, whereas the laser-treated titanium surface became superhydrophobic, with a water contact angle of θ(W) 166 ± 4°. Investigations of the interaction of S. aureus and P. aeruginosa with these superhydrophobic surfaces at the surface-liquid interface revealed a highly selective retention pattern for two pathogenic bacteria. While S. aureus cells were able to successfully colonize the superhydrophobic titanium surfaces, no P. aeruginosa cells were able to attach to the surface (i.e., any attached bacterial cells were below the estimated lower detection limit).
Titanium and its alloys remain the most popular choice as a medical implant material because of its desirable properties. The successful osseointegration of titanium implants is, however, adversely affected by the presence of bacterial biofilms that can form on the surface, and hence methods for preventing the formation of surface biofilms have been the subject of intensive research over the past few years. In this study, we report the response of bacteria and primary human fibroblasts to the antibacterial nanoarrays fabricated on titanium surfaces using a simple hydrothermal etching process. These fabricated titanium surfaces were shown to possess selective bactericidal activity, eliminating almost 50% of Pseudomonas aeruginosa cells and about 20% of the Staphylococcus aureus cells coming into contact with the surface. These nano-patterned surfaces were also shown to enhance the aligned attachment behavior and proliferation of primary human fibroblasts over 10 days of growth. These antibacterial surfaces, which are capable of exhibiting differential responses to bacterial and eukaryotic cells, represent surfaces that have excellent prospects for biomedical applications.
Attachment tendencies of Escherichia coli K12, Pseudomonas aeruginosa ATCC 9027, and Staphylococcus aureus CIP 68.5 onto glass surfaces of different degrees of nanometer-scale roughness have been studied. Contact-angle and surface-charge measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM) were employed to characterize substrata and bacterial surfaces. Modification of the glass surface resulted in nanometer-scale changes in the surface topography, whereas the physicochemical characteristics of the surfaces remained almost constant. AFM analysis indicated that the overall surface roughness parameters were reduced by 60-70%. SEM, CLSM, and AFM analysis clearly demonstrates that although E. coli, P. aeruginosa and S. aureus present significantly different patterns of attachment, all of the species exhibited a greater propensity for adhesion to the "nano-smooth" surface. The bacteria responded to the surface modification with a remarkable change in cellular metabolic activity, as shown by the characteristic cell morphologies, production of extracellular polymeric substances, and an increase in the number of bacterial cells undergoing attachment.
Attempts at depositing uniform films of nanoparticles by drop-drying have been frustrated by the "coffee-stain" effect due to convective macroscopic flow into the contact line. Here, we show that uniform deposition of nanoparticles in aqueous suspensions can be attained easily by drying the droplet in an ethanol vapor atmosphere. This technique allows the particle-laden water droplets to spread on a variety of surfaces such as glass, silicon, mica, PDMS, and even Teflon. Visualization of droplet shape and internal flow shows initial droplet spreading and strong recirculating flow during spreading and shrinkage. The initial spreading is due to a diminishing contact angle from the absorption of ethanol from the vapor at the contact line. During the drying phase, the vapor is saturated in ethanol, leading to preferential evaporation of water at the contact line. This generates a surface tension gradient that drives a strong recirculating flow and homogenizes the nanoparticle concentration. We show that this method can be used for depositing catalyst nanoparticles for the growth of single-walled carbon nanotubes as well as to manufacture plasmonic films of well-spaced, unaggregated gold nanoparticles.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.