The angular resolution of many commercial imaging systems is limited, not by diffraction or optical aberrations, but by pixilation effects. Multiaperture imaging has previously demonstrated the potential for super-resolution (SR) imaging using a lenslet array and single detector array. We describe the practical demonstration of SR imaging using an array of 25 independent commercial-off-the-shelf cameras. This technique demonstrates the potential for increasing the angular resolution toward the diffraction limit, but without the limit on angular resolution imposed by the use of a single detector array.
Foveated imaging, such as that evolved by biological systems to provide high angular resolution with a reduced space-bandwidth product, also offers advantages for manmade task-specific imaging. Foveated imaging systems using exclusively optical distortion are complex, bulky, and high cost, however. We demonstrate foveated imaging using a planar array of identical cameras combined with a prism array and superresolution reconstruction of a mosaicked image with a foveal variation in angular resolution of 5.9:1 and a quadrupling of the field of view. The combination of low-cost, mass-produced cameras and optics with computational image recovery offers enhanced capability of achieving large foveal ratios from compact, low-cost imaging systems. Conventional approaches to imaging typically aim for an approximately uniform spatial sampling frequency across the field of view, but for many applications, such as targeting, the salient requirement is for high-resolution imaging within a central, so-called foveal region of the image combined with a lowresolution periphery providing situational awareness and context. Foveated imaging offers more efficient use of a limited number of detector pixels or can be implemented as an image processing technique applied to conventional images to improve the efficiency of information transmission. Here our emphasis is to attain a large ratio between the spatial sampling frequency and image acuity for the central field of view (FOV) and a reduced sampling frequency at larger field angles. This mimics biological systems, such as the human visual system, where foveated imaging is associated with a variation in photoreceptor packing density that approximately mirrors the angular variation in the optical resolution of the eye.Imaging systems with a variation in magnification of up to a factor of 2 between a central FOV and the periphery (the foveal ratio) have been demonstrated using conventional optical approaches, but higher ratios require dramatic increases in optical complexity. Higher foveal ratios are attractive for a wide range of applications [1][2][3][4][5][6], and previous approaches include the use of multiresolution systems using single [1] or multiple sensors [2][3][4] and applications in microscopy [5,6]. In this Letter we report an experimental demonstration of computational construction of a foveated image using a multicamera array. Two mechanisms contribute to the high foveal ratio of 5.9:1 between the angular sampling frequency in the foveal and peripheral regions of the image: image distortion introduced by an array of prisms located in front of the camera array introduces nonuniform angular sampling by the sensor, and overlap of the field of regard of the cameras at the central FOV enables digital superresolution to increase the angular sampling rate at foveal regions. The use of mass-produced cameras and simple prisms enables high-performance foveated imaging at minimal cost.A 5 × 5 multicamera array is assembled on a single printed circuit board, with the relatively low ...
Multichanneled imaging systems rely on nonredundant images recorded by an array of low-resolution imagers to enable construction of a high-resolution image. We show how the varying degree of redundancy associated with imaging throughout the imaged volume effects image quality. Using ray-traced image simulations and a metric used as a proxy for human perception, we show that robust recovery of high-resolution images can be obtained by avoiding excessive redundancy and that this is a felicitous consequence of typical manufacturing tolerances.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.