The subject of radio wave propagation in tunnels has gathered attention in recent years, mainly regarding the fading phenomena caused by internal reflections. Several methods have been suggested to describe the propagation inside a tunnel. This work is based on the ray tracing approach, which is useful for structures where the dimensions are orders of magnitude larger than the transmission wavelength. Using image theory, we utilized a multi-ray model to reveal non-dimensional parameters, enabling measurements in down-scaled experiments. We present the results of field experiments in a small concrete pedestrian tunnel with smooth walls for radio frequencies (RF) of 1, 2.4, and 10 GHz, as well as in a down-scaled model, for which millimeter waves (MMWs) were used, to demonstrate the roles of the frequency, polarization, tunnel dimensions, and dielectric properties on the wave propagation. The ray tracing method correlated well with the experimental results measured in the tunnel as well as in a scale model.

The construction of a transmission line (TL) for a wide tunable broad-spectrum THz radiation source is not a simple task. We present here a platform for the future use of designs of the TL through our homemade simulations. The TL is designed to be a component of the construction of an innovative accelerator at the Schlesinger Family Center for Compact Accelerators, Radiation Sources and Applications (FEL). We developed a three-dimensional space-frequency tool for the analysis of a radiation pulse. The total electromagnetic (EM) field on the edge of the source is represented in the frequency domain in terms of cavity eigenmodes. However, any pulse can be used regardless of its mathematical function, which is the key point of this work. The only requirement is the existence of the original pulse. This EM field is converted to geometric-optical ray representation through the Wigner transform at any desired resolution. Wigner’s representation allows us to describe the dynamics of field evolution in future propagation, which allows us to determine an initial design of the TL. Representation of the EM field by rays gives access to the ray tracing method and future processing, operating in the linear and non-linear regimes. This allows for fast work with graphics cards and parallel processing, providing great flexibility and serving as future preparation that enables us to apply advanced libraries such as machine learning. The platform is used to study the phase-amplitude and spectral characteristics of multimode radiation generation in a free-electron laser (FEL) operating in various operational parameters.

In this study, we propose a range detection (RD) ability by a continuous wave (CW) bistatic Doppler radar (RDCWB) of small and fast targets with very high range resolution. The target’s range and velocity are detected simultaneously. The scheme is based on the transmission of a continuous wave (CW) at millimeter wavelength (MMW) and the measurement of the respective Doppler shifts associated with target movements in different directions. The range resolution in this method is determined by the Doppler resolution only, without the necessity to transmit the modulated waveforms as in frequency modulation continuous wave (FMCW) or pulse radars. As the Doppler resolution in CW depends only on the time window required for processing, a very highrange resolution can be obtained. Most other systems that perform target localization use the transmission of wide-band waveforms while measuring the delay of the received signal scattered from the target. In the proposed scheme, the range resolution depends on the processed integration time of the detected signal and the velocity of the target. The transmission is performed from separated antennas and received by a single antenna. The received signal is heterodyned with a sample of the transmitted signal in order to obtain the Doppler shifts associated with the target’s movement. As in a multi-in multi-out (MIMO) configuration, the presented scheme allows for the accumulation of additional information for target classification. Data on the target’s velocity, distance, direction, and instantaneous velocity can be extracted. Using digital processing, with the additional information obtained by analyzing the difference between the resulting intermediate frequencies caused by the Doppler effect, it is possible to calculate the distance between the radar and the target at high resolution in real-time. The presented method, which was tested experimentally, proved to be highly effective, as only one receiver is required for the detection, while the transmission is carried out using a fixed, single-frequency transmission.

Tera Hertz radiation is currently the most researched and useful area in almost all fields of science and industry. The additional challenge is expressed in the form of radiation, pulses of femto-seconds in length are supposed to pass through a transmission line (TL) most efficiently, at a wide range of frequencies. These are complex beams, which make up the electromagnetic (EM) field, represented in the frequency domain in terms of cavity eigenmodes. A simulation allows to describe of the phase-amplitude and spectral characteristics of multimode radiation free-electron laser (FEL) operating in various operational parameters. The analysis is performed through the transmission of optical rays accurately, with each ray being characterized by amplitude, position, and angle in 3D space. A light field representation of a complex EM field is obtained via Wigner Distribution Function, which allows to describe of the dynamics of field evolution in future propagation by a ray tracing (RT) method. The final diagnostics will determine the design of the TL to be assembled in an innovative accelerator under construction at the Schlesinger Family Center for Compact Accelerators, Radiation Sources, and Applications.

The electro-optical process is a popular method for terahertz radiation detection. Detectors based on the electro-optical process have large bandwidth, and the signal-to-noise ratio (SNR) is relatively high. Further, this detector can be applied to detect high-power signals without using radiation attenuation. This paper presents a method to improve the electro-optic process to THz radiation detection based on GaAs crystals by coupling the optical output signal into fiber. Results demonstrated an improvement in the signal-to-noise ratio that means an increase in the dynamic range of the electro-optical detector.