NOMENCLATURE p = laser power [W] v s = scan speed [mm/s] f p = pulse frequency [kHz] n p = number of passes b s = bite size d e = effective diameter based on laser ablation z R = Rayleigh range w 0 = minimum beam waist λ 0 = laser wavelength in free space n = index of laser refractionThe packaging of membranes adjacent to microchannels is of growing interest. To facilitate this, microgrooves were laser machined into a polyetherimide (PEI) embossing tool to produce sealing bosses for embossed polycarbonate (PC) microchannel laminae. Laser ablation was conducted using a Nd:YAG laser at 355 nm. Sealing bosses were produced and characterized by hot embossing of PC sheet using the PEI tool as a master. Sealing bosses of around 10 µm in height were successfully reproduced. Laser power between 0.3 and 0.7 W and scan speeds of 200 to 400 mm/s were found to be most important for controlling the boss height. As expected, the boss width was found to be dependent on the laser beam diameter. The effect of specimen flatness was found to be negligible.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.