The demand on the longitudinal reinforcement due to shear has been traditionally based on statics but has rarely been measured. Empirical assumptions needed for the concrete stiffness and the variability of reinforcement strain due to cracking and disturbed regions complicate these measurements, and make the use of conventional strain gauges impractical. This paper investigates the use of distributed measurements from a large reinforced concrete beam test to study the effects of disturbed regions, forces at a crack, shrinkage, and the in situ modulus of elasticity of concrete.The increased demand due to shear on the longitudinal reinforcement was observed, and the Canadian code was shown to provide an accurate upper bound to the measured strain at service loads. The measured longitudinal strains were also used to estimate the average angle of principal compressive stress, and it was observed to decrease with applied load, reaching values as low as 14 near failure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.