In recent years, many alloys as well as composites of aluminium were developed for enhanced material performance. AA 6061 is an aluminium alloy that has extensive applications due to its superior material characteristics. It is a popular choice of matrix for aluminium matrix composite (AMC) fabrication. This study provides a review on AA 6061 aluminium alloy matrix composites produced through the stir-casting process. It focusses on conventional stir-casting fabrication, process parameters, various reinforcements used, and the mechanical properties of the AA 6061 composites. Several research studies indicated that the stir-casting method is widely used and suitable for fabricating AA 6061 composites with reinforcements such as SiC, B4C, Al2O3, TiC, as well as other inorganic, organic, hybrid, and nanomaterials. The majority of the studies showed that an increase in the reinforcement content enhanced the mechanical and tribological properties of the composites. Furthermore, hybrid composites showed better material properties than single reinforcement composites. The usage of industrial and agricultural residues in hybrid composites is also reported. Future studies could focus on the fabrication of AA 6061 nanocomposites through stir casting and their material characterisation, since they have great potential as advanced materials.
Electric discharge machining (EDM) is a material removal process that is especially useful for difficult-to-cut materials with complex shapes and is widely used in aerospace, automotive, surgical tools among other fields. EDM is one of the most efficient manufacturing processes and is used to achieve highly accurate production. It is a non-contact thermal energy process used to machine electrically conductive components irrespective of the material’s mechanical properties. Studies related to the EDM have shown that the process performance can be considerably improved by properly selecting the process material and operating parameters. This paper reviews research studies on the application of EDM to different grades of stainless steel materials and describes experimental and theoretical studies of EDM that have attempted to improve the process performance, by considering material removal rate, surface quality and tool wear rate, amongst others. In addition, this paper examines evaluation models and techniques used to determine the EDM process conditions. This review also presents a discussion on developments in EDM and outlines the likely trend for future research.
Electric discharge machining (EDM) is one of the most efficient manufacturing technologies used in highly accurate processing of all electrically conductive materials irrespective of their mechanical properties. It is a non-contact thermal energy process applied to a wide range of applications, such as in the aerospace, automotive, tools, molds and dies, and surgical implements, especially for the hard-to-cut materials with simple or complex shapes and geometries. Applications to molds, tools, and dies are among the large-scale initial applications of this process. Machining these items is especially difficult as they are made of hard-to-machine materials, they have very complex shapes of high accuracy, and their surface characteristics are sensitive to machining conditions. The review of this kind with an emphasis on tool and die materials is extremely useful to relevant professions, practitioners, and researchers. This review provides an overview of the studies related to EDM with regard to selection of the process, material, and operating parameters, the effect on responses, various process variants, and new techniques adopted to enhance process performance. This paper reviews research studies on the EDM of different grades of tool steel materials. This article (i) pans out the reported literature in a modular manner with a focus on experimental and theoretical studies aimed at improving process performance, including material removal rate, surface quality, and tool wear rate, among others, (ii) examines evaluation models and techniques used to determine process conditions, and (iii) discusses the developments in EDM and outlines the trends for future research. The conclusion section of the article carves out precise highlights and gaps from each section, thus making the article easy to navigate and extremely useful to the related research community.
Electrical discharge machining (EDM) is an advanced machining method which removes metal by a series of recurring electrical discharges between an electrode and a conductive workpiece, submerged in a dielectric fluid. Even though EDM techniques are widely used to cut hard materials, low efficiency and high tool wear remain remarkable challenges in this process. Various studies, such as mixing different powders to dielectric fluids, are progressing to improve their efficiency. This paper reviews advances in the powder-mixed EDM process. Furthermore, studies about various powders used for the process and its comparison are carried out. This review looks at the objectives of achieving a more efficient metal removal rate, reduction in tool wear, and improved surface quality of the powder-mixed EDM process. Moreover, this paper helps researchers select suitable powders which are exhibiting better results and identifying different aspects of powder-mixed dielectric fluid of EDM.
The productivity of machine tools is significantly improved by using microcomputer based CAD/CAM systems for NC program generation. Currently, many commercial CAD/CAM packages that provide automatic NC programming have been developed and applied to various cutting processes. Many cutting processes machined by CNC machine tools. In this paper, we attempt to find an efficient solution approach to determine the best sequence of operations for a set of operations that located in asymmetrical locations and different levels. In order to find the best sequence of operations that achieves the shortest cutting tool travel path (CTTP), genetic algorithm is introduced. After the sequence is optimized, the G-codes that use to code for the travel time is created. CTTP can be formulated as a special case of the traveling salesman problem (TSP). The incorporation of genetic algorithm and TSP can be included in the commercial CAD/CAM packages to optimize the CTTP during automatic generation of NC programs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.