Optical nonlinearities of ZnO thin films, made by laser deposition, were investigated by the Z-scan method using a mode-locked femtosecond Ti:sapphire laser. The measured bound-electron nonlinear index of refraction ␥ and the two-photon absorption coefficient ␤ at near-IR wavelengths show an enormous enhancement compared with measurements on bulk ZnO at 532 nm. The results reveal that two-photon resonance to the band edge and exciton energy level is responsible for the nonlinear absorption and that the free carrier induced the optical nonlinearity. With the excitation wavelength operated between 810 to 840 nm, a negative ␤ value is measured due to the saturation of linear absorption of the defect states. Finally, we compared the values of ␤ from the closed aperture Z-scan data ͑by considering the multi-photon absorption induced thermal nonlinearity͒ with those obtained from the open aperture Z-scan data. The results show that nonlinear refraction in the near-IR region is dominated by the bound-electron and free-carrier effect, although the thermal optical nonlinearity cannot be completely ignored.

The Conducting of polymers belongs to the class of polymers exhibiting excellence in electrical performances because of their intrinsic delocalized π- electrons and their tunability ranges from semi-conductive to metallic conductive regime. Conducting polymers and their composites serve greater functionality in the application of strain and pressure sensors, especially in yielding a better figure of merits, such as improved sensitivity, sensing range, durability, and mechanical robustness. The electrospinning process allows the formation of micro to nano-dimensional fibers with solution-processing attributes and offers an exciting aspect ratio by forming ultra-long fibrous structures. This review comprehensively covers the fundamentals of conducting polymers, sensor fabrication, working modes, and recent trends in achieving the sensitivity, wide-sensing range, reduced hysteresis, and durability of thin film, porous, and nanofibrous sensors. Furthermore, nanofiber and textile-based sensory device importance and its growth towards futuristic wearable electronics in a technological era was systematically reviewed to overcome the existing challenges.

Several biological membranes have been served as scattering materials of random lasers, but few of them include natural photonic crystals. Here, we propose and demonstrate a facile approach to fabricating high-performance biological photonic crystal random lasers, which is cost-effective and reproducible for mass production. As a benchmark, optical and lasing properties of dye-coated Lepidoptera wings, including Papilio ulysses butterfly and Chrysiridia rhipheus moth, are characterized and show a stable laser emission with a superior threshold of 0.016 mJ/cm2, as compared to previous studies. To deploy the proposed devices in practical implementation, we have applied the as-fabricated biological devices to bright speckle-free imaging applications, which is a more sustainable and more accessible imaging strategy.

Interfaces play a decisive role in perovskite solar cells’ power conversion efficiency and their long‐term durability. Small‐molecule hole‐transporting materials (HTMs) have grabbed enormous attention due to their structural flexibility, material properties, and stabilities, allowing for improved operational durability in perovskite photovoltaics. This study synthesizes and investigates a new class of benzimidazole‐based small molecules, named YJS001 and YJS003, serving as the HTMs to enable high‐efficiency mixed‐cation mixed‐halide perovskite solar cells. The benzimidazole‐based materials are dopant‐free HTMs composed of donor and acceptor building blocks that are designed to engineer the energy level alignment near the HTM/perovskite interface. Mixed‐cation mixed‐halide perovskites can be grown uniformly on both HTMs with large crystalline grains. It is discovered that the donor‐rich YJS003‐based solar cell exhibits a high open‐circuit voltage of 1.09 V with a champion power conversion efficiency of over 20%. Power‐dependent current–voltage characteristics of the solar cells are analyzed, from which the high performance of YJS003's excellent hole mobility and well‐aligned energy level is attributed. This work introduces a new class of benzimidazole‐based small molecules as HTMs, that paves the path for dopant free interface material development for commercialization of perovskite solar cells.

Regular and robust Q-switched and mode-locked (QML) pulses are produced in Nd:GdVO4 laser by the integration of nonlinear mirror and semiconductor saturable absorber mirror. The threshold of QML operation is increased by putting the SESAM in laser cavity with large beam radius. The nonlinear mirror absorber can further increase nonlinear loss modulation of pulses to produce the stable and periodic QML pulses.