Inductive power transfer is a practical method for recharging electric vehicles because it is safe, convenient, and reliable. The performance of the magnetic couplers that transfer power determines the overall feasibility of a complete system. Circular couplers are the most common topology in the literature; however, they have fundamentally limited coupling. Their flux patterns necessarily limit the operational air gap as well as tolerance to horizontal misalignment. A new polarized coupler topology [referred to as a double D (DD)] is presented, which overcomes these difficulties. DDs provide a charge zone five times larger than that possible with circular pads for a similar material cost and are smaller. A 0.31-m 2 DD enables 2 kW of power transfer over an oval area measuring 540 mm × 800 mm with a 200-mm air gap. Leakage magnetic fields have been investigated and show that circular and DD couplers operating under similar power transfer conditions produce similar levels. Both topologies can be designed and operated to ensure compliance with international guidelines.Index Terms-Contactless power transfer, magnetic analysis, magnetic fields.

No abstract

Inductive power transfer (IPT) has progressed to be a power distribution system offering significant benefits in modern automation systems and particularly so in stringent environments. Here, the same technology may be used in very dirty environments and in a clean room manufacture. This paper reviews the development of simple factory automation (FA) IPT systems for both today's complex applications and onward to a much more challenging application-IPT roadway. The underpinning of all IPT technology is two strongly coupled coils operating at resonance to transfer power efficiently. Over time the air-gap, efficiency, coupling factor, and power transfer capability have significantly improved. New magnetic concepts are introduced to allow misalignment, enabling IPT systems to migrate from overhead monorails to the floor. However, the demands of IPT roadway bring about significant challenges. Here, compared with the best FA practice, air-gaps need to be 100 times larger, power levels greater than ten times, system losses ten times lower to meet efficiency requirements, and systems from different manufacturers must be interoperable over the full range of operation. This paper describes how roadway challenges are being met and outlines the problems that still exist and the solutions designers are finding to them.

The historical background, technological issues, and engineering applications of inductive power transfer are presented in this paper. The authors also share their vision and arguments on the engineering challenges and future developments such as roadway powered systems.

No abstract