The electrochemical properties of corrosion products formed under sodium chloride deposits on zinc coatings alloyed with aluminium and magnesium have been studied using impedance spectroscopy (EIS), scanning Kelvin probe (SKP) and photoluminescence (PL) techniques. The low‐energy band gap identified in corrosion products on hot‐dip galvanized steel was associated with their higher electric conductivity and efficiency of the rate‐controlling oxygen reduction reaction. It was attributed to the presence of ZnO, zincite. The formation of ZnO was hindered by the alloying. The alloyed coatings were covered by more compact layers of corrosion products with lower electric conductivity and better barrier properties.
Fe–Al–Si alloys have been previously reported as an interesting alternative to common high-temperature materials. This work aimed to improve the properties of FeAl20Si20 alloy (in wt.%) by the application of powder metallurgy process consisting of ultrahigh-energy mechanical alloying and spark plasma sintering. The material consisted of Fe3Si, FeSi, and Fe3Al2Si3 phases. It was found that the alloy exhibits an anomalous behaviour of yield strength and ultimate compressive strength around 500 °C, reaching approximately 1100 and 1500 MPa, respectively. The results also demonstrated exceptional wear resistance, oxidation resistance, and corrosion resistance in water-based electrolytes. The tested manufacturing process enabled the fracture toughness to be increased ca. 10 times compared to the cast alloy of the same composition. Due to its unique properties, the material could be applicable in the automotive industry for the manufacture of exhaust valves, for wear parts, and probably as a material for selected aggressive chemical environments.
Carbon steel is currently being considered as a candidate canister material for use in a deep geological repository of radioactive waste. Assessment of canister material corrosion through microbial activity is an important part of the safety assessment for the final repository. The aim of study was to compare and characterise the corrosion behaviour of carbon steel under sterile and non-sterile anaerobic conditions in natural groundwater containing sulphate-reducing bacteria (SRB). A molecularbiological approach was used to determine the presence and abundance changes of relevant bacterial groups. Carbon steel corrosion rates were higher in the presence of SRB compared with sterile control. EIS described the evolution of three time-constants under non-sterile conditions, while scanning electron microscopy confirmed that the carbon steel surface was covered with a two-layer biofilm. Molecular-biological analysis of the water and biofilm indicated the dominance of SRB, with Desulfomicrobium and Desulfovibrio species prevalent.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.