We present a highly stable bow-tie power enhancement cavity for critical second harmonic generation (SHG) into the UV using a Brewster-cut β-BaBO (BBO) nonlinear crystal. The cavity geometry is suitable for all UV wavelengths reachable with BBO and can be modified to accommodate anti-reflection coated crystals, extending its applicability to the entire wavelength range accessible with non-linear frequency conversion. The cavity is length-stabilized using a fast general purpose digital PI controller based on the open source STEMlab 125-14 (formerly Red Pitaya) system acting on a mirror mounted on a fast piezo actuator. We observe 130 h uninterrupted operation without decay in output power at 313 nm. The robustness of the system has been confirmed by exposing it to accelerations of up to 1 g with less than 10% in-lock output power variations. Furthermore, the cavity can withstand 30 min of acceleration exposure at a level of 3 g without substantial change in the SHG output power, demonstrating that the design is suitable for transportable setups.

Cooling and detection schemes using laser cooling and methods of quantum logic can contribute to high precision CPT symmetry tests in the baryonic sector. This work introduces an experiment to sympathetically cool protons and antiprotons using the Coulomb interaction with a 9 Be + ion trapped in a nearby but separate potential well. We have designed and set up an apparatus to show such coupling between two identical ions for the first time in a Penning trap. In this paper, we present evidence for successful loading and Doppler cooling of clouds and single ions are presented. Our coupling scheme has applications in a range of high-precision measurements in Penning traps and has the potential to substantially improve motional control in these experiments.

The finite element method is a powerful tool for the design and optimization of hot forming processes. In order to obtain high accuracy in simulation results, exact knowledge of the process conditions is required. Due to the fact that friction in the contact area has a significant impact on the material flow during the forming process, a realistic description of this boundary condition in the FE simulation is important for the usability of the simulation results. The most important influencing factors are the contact pressure, the roughness of the contact surfaces, the sliding velocity and the flow behavior of the material. Currently, only constant friction coefficients are considered in commercial finite element systems for the simulation of bulk metal forming processes. However, this description does not represent the state of the art in tribology. A new friction model is developed, taking into account the sliding velocity between tools and workpiece. This is confirmed by experimental and numerical investigations on model experiments and industrial process.

In hot forging processes the complex heat transfer and friction conditions are significantly influenced by the local effects occurring at the contact interface between the tool and workpiece. These effects basically include the prevailing normal stress and shear yield stress of the workpiece material, the temperature and surface roughness of the tool and workpiece as well as the relative sliding velocity. Hence, these effects were considered for the extension of the heat transfer and friction models. Two representative forging tests were carried out; the forming load and surface temperature distribution were recorded. By means of this data, the models were appropriately extended and adjusted using the software FORGE ®. The application of the extended models allows for a more accurate description of the interaction at the contact interface. Thus FE computations of hot forging processes deliver more realistic results.

No abstract

Cosmological observations as well as theoretical approaches to physics beyond the standard model provide strong motivations for experimental tests of fundamental symmetries, such as CPT invariance. In this context, the availability of cold baryonic antimatter at CERN has opened an avenue for ultrahigh-precision comparisons of protons and antiprotons in Penning traps. This work discusses an experimental method inspired by quantum logic techniques that will improve particle localization and readout speed in such experiments. The method allows for sympathetic cooling of the (anti-)proton to its quantum-mechanical ground state as well as the readout of its spin alignment, replacing the commonly used continuous Stern–Gerlach effect. Both of these features are achieved through coupling to a laser-cooled ‘logic’ ion co-trapped in a double-well potential. This technique will boost the measurement sampling rate and will thus provide results with lower statistical uncertainty, contributing to stringent searches for time dependent variations in the data. Such measurements ultimately yield extremely high sensitivities to CPT violating coefficients acting on baryons in the standard-model extension, will allow the exploration of previously unmeasured types of symmetry violations, and will enable antimatter-based axion-like dark matter searches with improved mass resolution.

We present methods to manipulate and detect the motional state and the spin state of a single antiproton or proton which are currently under development within the BASE (Baryon Antibaryon Symmetry Experiment) collaboration. These methods include sympathetic laser cooling of a single (anti-)proton using a co-trapped atomic ion as well as quantum logic spectroscopy with the two particles and could be implemented within the collaboration for state preparation and state readout in the antiproton g-factor measurement experiment at CERN. In our project, these techniques shall be applied using a single 9 Be + ion as the atomic ion in a Penning trap system at a magnetic field of 5 T. As an intermediate step, a controlled interaction of two beryllium ions in a double-well potential as well as sympathetic cooling of one ion by the other shall be demonstrated.

We discuss laser-based and quantum logic inspired cooling and detection methods amenable to single (anti-)protons. These would be applicable e. g. in a g-factor based test of CPT invariance as currently pursued within the BASE collaboration. Towards this end, we explore sympathetic cooling of single (anti-)protons with atomic ions as suggested by Heinzen and Wineland (1990).