We experimentally demonstrate dielectrophoretic concentration of biological analytes on the surface of a gold nanohole array, which concurrently acts as a nanoplasmonic sensor and gradient force generator. The combination of nanohole-enhanced dielectrophoresis, electroosmosis, and extraordinary optical transmission through the periodic gold nanohole array enables real-time label-free detection of analyte molecules in a 5 µL droplet using concentrations as low as 1 pM within a few minutes, which is more than 1000 times faster than purely diffusion-based binding. The nanohole-based optofluidic platform demonstrated here is straightforward to construct, applicable to both charged and neutral molecules, and performs a novel function that cannot be accomplished using conventional surface plasmon resonance sensors.
We present a new plasmonic device architecture based on ultrasmooth metallic surfaces with buried plasmonic nanostructures. Using template-stripping techniques, ultrathin gold films with less than 5 Å surface roughness are optically coupled to an arbitrary arrangement of buried metallic gratings, rings, and nanodots. As a prototypical example, we present linear plasmonic gratings buried under an ultrasmooth 20 nm thick gold surface for biosensing. The optical illumination and collection are completely decoupled from the microfluidic delivery of liquid samples due to the backside, reflection-mode geometry. This allows for sensing with opaque or highly scattering liquids. With the buried nanostructure design, we maintain high sensitivity and decoupled backside (reflective) optical access as with traditional prism-based surface plasmon resonance (SPR) sensors. In addition, we also gain the benefits offered by nanoplasmonic sensors such as spectral tunability and high-resolution, wide-field SPR imaging with normal-incidence epi-illumination that is simple to construct and align. Beyond sensing, our buried plasmonic nanostructures with ultrasmooth metallic surfaces can benefit nanophotonic waveguides, surface-enhanced spectroscopy, nanolithography, and optical trapping.
Photoacoustic detection of melanoma metastases based on their melanin content proves to be possible in resected human lymph nodes. The amount of PA signal and several specific anatomical features seem to provide additional characteristics for nodal analysis. However, it is as yet preliminary to designate a highly accurate parameter to distinguish between malignant and benign nodes. We expect to improve the specificity of the technique with a future implementation of an adjusted illumination scheme and depth correction for photon fluence.
Gradient fields of optical, magnetic, or electrical origin are widely used for the manipulation of micro- and nanoscale objects. Among various device geometries to generate gradient forces, sharp metallic tips are one of the most effective. Surface roughness and asperities present on traditionally produced tips reduce trapping efficiencies and limit plasmonic applications. Template-stripped, noble metal surfaces and structures have sub-nm roughness and can overcome these limits. We have developed a process using a mix of conductive and dielectric epoxies to mount template-stripped gold pyramids on tungsten wires that can be integrated with a movable stage. When coupled with a transparent indium tin oxide (ITO) electrode, the conductive pyramidal tip functions as a movable three-dimensional dielectrophoretic trap which can be used to manipulate submicrometer-scale particles. We experimentally demonstrate the electrically conductive functionality of the pyramidal tip by dielectrophoretic manipulation of fluorescent beads and concentration of single-walled carbon nanotubes, detected with fluorescent microscopy and Raman spectroscopy.
Nanofabricated metallic tips are at the core of important research in single‐molecule imaging, near‐field scanning optical microscopy, tip‐enhanced Raman spectroscopy, as well as potential commercial applications such as heat‐assisted magnetic recording. While challenging to fabricate, much progress has been made towards the reliable production of extremely sharp (10 nm) metallic probes. In this review, the various factors that go into the design of metallic tips, their fabrication, packaging and system integration, characterization, passivation, and eventual use are discussed. Fabrication challenges, implementation issues, optical excitation schemes, and various current and emerging applications are also discussed. For the rapidly emerging fields of plasmonics and nanophotonics, the use of sharp metallic tips has generated significant scientific progress and will play an integral role well into the future.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.