A stochastic magnetic boundary, produced by an applied edge resonant magnetic perturbation, is used to suppress most large edge-localized modes (ELMs) in high confinement (H-mode) plasmas. The resulting H mode displays rapid, small oscillations with a bursty character modulated by a coherent 130 Hz envelope. The H mode transport barrier and core confinement are unaffected by the stochastic boundary, despite a threefold drop in the toroidal rotation. These results demonstrate that stochastic boundaries are compatible with H modes and may be attractive for ELM control in next-step fusion tokamaks.

International collaboration on development of a stellarator confinement database has progressed. More than 3000 data points from nine major stellarator experiments have been compiled. Robust dependences of the energy confinement time on the density and the heating power have been confirmed. Dependences on other operational parameters, i.e. the major and minor radii, magnetic field and the rotational transform , have been evaluated using inter-machine analyses. In order to express the energy confinement in a unified scaling law, systematic differences in each subgroup are quantified. An a posteriori approach using a confinement enhancement factor on ISS95 as a renormalizing configuration-dependent parameter yields a new scaling expression ISS04; . Gyro–Bohm characteristic similar to ISS95 has been confirmed for the extended database with a wider range of plasma parameters and magnetic configurations than in the study of ISS95. It has also been discovered that there is a systematic offset of energy confinement between magnetic configurations, and its measure correlates with the effective helical ripple of the external stellarator field. Full documentation of the International Stellarator Confinement Database is available at http://iscdb.nifs.ac.jp/ and http://www.ipp.mpg.de/ISS.

Demonstrating improved confinement of energetic ions is one of the key goals of the Wendelstein 7-X (W7-X) stellarator. In the past campaigns, measuring confined fast ions has proven to be challenging. Future deuterium campaigns would open up the option of using fusion-produced neutrons to indirectly observe confined fast ions. There are two neutron populations: 2.45 MeV neutrons from thermonuclear and beam-target fusion, and 14.1 MeV neutrons from DT reactions between tritium fusion products and bulk deuterium. The 14.1 MeV neutron signal can be measured using a scintillating fiber neutron detector, whereas the overall neutron rate is monitored by common radiation safety detectors, for instance fission chambers. The fusion rates are dependent on the slowing-down distribution of the deuterium and tritium ions, which in turn depend on the magnetic configuration via fast ion orbits. In this work, we investigate the effect of magnetic configuration on neutron production rates in W7-X. The neutral beam injection, beam and triton slowing-down distributions, and the fusion reactivity are simulated with the ASCOT suite of codes. The results indicate that the magnetic configuration has only a small effect on the production of 2.45 MeV neutrons from DD fusion and, particularly, on the 14.1 MeV neutron production rates. Despite triton losses of up to 50 %, the amount of 14.1 MeV neutrons produced might be sufficient for a time-resolved detection using a scintillating fiber detector, although only in high-performance discharges.

Large sub-millisecond heat pulses due to Type-I edge localized modes (ELMs) have been eliminated reproducibly in DIII-D for periods approaching nine energy confinement times (τ E ) with small dc currents driven in a simple magnetic perturbation coil. The current required to eliminate all but a few isolated Type-I ELM impulses during a coil pulse is less than 0.4% of plasma current. Based on magnetic field line modelling, the perturbation fields resonate with plasma flux surfaces across most of the pedestal region (0.9 ψ N 1.0) when q 95 = 3.7 ± 0.2, creating small remnant magnetic islands surrounded by weakly stochastic field lines. The stored energy, β N , H-mode quality factor and global energy confinement time are unaltered by the magnetic perturbation. Although some isolated ELMs occur during the coil pulse, long periods free of large Type-I ELMs ( t > 4-6 τ E ) have been reproduced numerous times, on multiple experimental run days in high and intermediate triangularity plasmas, including cases matching the baseline ITER scenario 2 flux surface shape. In low triangularity, lower single null plasmas, with collisionalities near that expected in ITER, Type-I ELMs are replaced by small amplitude, high frequency Type-II-like ELMs and are often accompanied by one or more ELM-free periods approaching 1-2 τ E . Large Type-I ELM impulses represent a severe constraint on the survivability of the divertor target plates in future burning plasma devices. Results presented in this paper demonstrate that non-axisymmetric edge magnetic perturbations provide a very attractive development path for active ELM control in future tokamaks such as ITER.

After completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreed for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3  ×  1019 m−3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.

Measurements of the rf electric field have been made along the z axis of a helicon reactor using a retarding field energy analyzer. A fluid code and a simple analytical model have been developed to analyze the ion energy distribution functions, especially in the case of bimodal distributions where the ion transit time through the sheath in front of the analyzer is comparable to the rf period. A generalized curve ͑and an analytical approximation to that curve͒ has been developed from the analytical model and confirmed by the self-consistent fluid model for high, low, and intermediate ion transit time, which can be used by experimenters to quickly convert the experimental results ͑energy peak separation, plasma potential and density, electron temperature͒, which are related to rf sheath oscillations, to absolute values of the rf electric field. An analysis of the errors involved in the derivation of the field is given. The results agree qualitatively with rf pickup measured with a floating Langmuir probe.

A low amplitude (δbr∕BT=1 part in 5000) edge resonant magnetic field perturbation with toroidal mode number n=3 and poloidal mode numbers between 8 and 15 has been used to suppress most large type I edge localized modes (ELMs) without degrading core plasma confinement. ELMs have been suppressed for periods of up to 8.6 energy confinement times when the edge safety factor q95 is between 3.5 and 4. The large ELMs are replaced by packets of events (possibly type II ELMs) with small amplitude, narrow radial extent, and a higher level of magnetic field and density fluctuations, creating a duty cycle with long “active” intervals of high transport and short “quiet” intervals of low transport. The increased transport associated with these events is less impulsive and slows the recovery of the pedestal profiles to the values reached just before the large ELMs without the n=3 perturbation. Changing the toroidal phase of the perturbation by 60° with respect to the best ELM suppression case reduces the ELM amplitude and frequency by factors of 2–3 in the divertor, produces a more stochastic response in the H-mode pedestal profiles, and displays similar increases in small scale events, although significant numbers of large ELMs survive. In contrast to the best ELM suppression case where the type I ELMs are also suppressed on the outboard midplane, the midplane recycling increases until individual ELMs are no longer discernable. The ELM response depends on the toroidal phase of the applied perturbation because intrinsic error fields make the target plasma nonaxisymmetric, and suggests that at least some of the variation in ELM behavior in a single device or among different devices is due to differences in the intrinsic error fields in these devices. These results indicate that ELMs can be suppressed by small edge resonant magnetic field perturbations. Extrapolation to next-step burning plasma devices will require extending the regime of operation to lower collisionality and understanding the physical mechanism responsible for the ELM suppression.

Large 70 Hz Type-I edge localized modes (ELMs) are converted into small 130 Hz oscillations using edge resonant magnetic perturbations (RMPs) from a coil with currents 60.4% I p in double null DIII-D plasmas. When the RMP is properly phased with respect to the background field errors, all but a few isolated ELM-like events are suppressed. The impulsive pedestal energy loss DE ELM /Dt 1/2 to the scrape-of layer is reduced a factor of P20 relative to the Type-I ELMs and the core confinement is unaffected by the perturbation field. Significant changes in the properties of the ELMs are also observed when edge RMPs are applied to lower single null plasmas but the nature of these changes are much more complex. Both lower single null and double null plasmas are being studied to determine how ELM control techniques based on the application of edge RMPs can be expected to scale to future devices such as ITER.