Abstract. This paper presents a comprehensive assessment of historical global anthropogenic particulate matter (PM) emissions including the consistent and harmonized calculation of mass-based size distribution (PM 1 , PM 2.5 , PM 10 ), as well as primary carbonaceous aerosols including black carbon (BC) and organic carbon (OC). The estimates were developed with the integrated assessment model GAINS, where source-and region-specific technology characteristics are explicitly included. This assessment includes a number of previously unaccounted or often misallocated emission sources, i.e. kerosene lamps, gas flaring, diesel generators, refuse burning; some of them were reported in the past for selected regions or in the context of a particular pollutant or sector but not included as part of a total estimate. Spatially, emissions were calculated for 172 source regions (as well as international shipping), presented for 25 global regions, and allocated to 0.5 • × 0.5 • longitude-latitude grids. No independent estimates of emissions from forest fires and savannah burning are provided and neither windblown dust nor unpaved roads emissions are included.We estimate that global emissions of PM have not changed significantly between 1990 and 2010, showing a strong decoupling from the global increase in energy consumption and, consequently, CO 2 emissions, but there are significantly different regional trends, with a particularly strong increase in East Asia and Africa and a strong decline in Europe, North America, and the Pacific region. This in turn resulted in important changes in the spatial pattern of PM burden, e.g. European, North American, and Pacific contributions to global emissions dropped from nearly 30 % in 1990 to well below 15 % in 2010, while Asia's contribution grew from just over 50 % to nearly two-thirds of the global total in 2010. For all PM species considered, Asian sources represented over 60 % of the global anthropogenic total, and residential combustion was the most important sector, contributing about 60 % for BC and OC, 45 % for PM 2.5 , and less than 40 % for PM 10 , where large combustion sources and industrial processes are equally important. Global anthropogenic emissions of BC were estimated at about 6.6 and 7.2 Tg in 2000 and 2010, respectively, and represent about 15 % of PM 2.5 but for some sources reach nearly 50 %, i.e. for the transport sector. Our global BC numbers are higher than previously published owing primarily to the inclusion of new sources.This PM estimate fills the gap in emission data and emission source characterization required in air quality and climate modelling studies and health impact assessments at a regional and global level, as it includes both carbonaceous and non-carbonaceous constituents of primary particulate matter emissions. The developed emission dataset has been used in several regional and global atmospheric transport and climate model simulations within the ECLIPSE (Evaluating the Climate and Air Quality Impacts of Short-Lived Pollutants) project and beyo...
Abstract. To estimate the impact of emissions by road, aircraft and ship traffic on ozone and OH in the present-day atmosphere six different atmospheric chemistry models have been used. Based on newly developed global emission inventories for road, ship and aircraft emission data sets each model performed sensitivity simulations reducing the emissions of each transport sector by 5%. The model results indicate that on global annual average lower tropospheric ozone responds most sensitive to ship emissions (50.6%±10.9% of the total traffic induced perturbation), followed by road (36.7%±9.3%) and aircraft exhausts (12.7%±2.9%), respectively. In the northern upper troposphere between 200–300 hPa at 30–60° N the maximum impact from road and ship are 93% and 73% of the maximum effect of aircraft, respectively. The latter is 0.185 ppbv for ozone (for the 5% case) or 3.69 ppbv when scaling to 100%. On the global average the impact of road even dominates in the UTLS-region. The sensitivity of ozone formation per NOx molecule emitted is highest for aircraft exhausts. The local maximum effect of the summed traffic emissions on the ozone column predicted by the models is 0.2 DU and occurs over the northern subtropical Atlantic extending to central Europe. Below 800 hPa both ozone and OH respond most sensitively to ship emissions in the marine lower troposphere over the Atlantic. Based on the 5% perturbation the effect on ozone can exceed 0.6% close to the marine surface (global zonal mean) which is 80% of the total traffic induced ozone perturbation. In the southern hemisphere ship emissions contribute relatively strongly to the total ozone perturbation by 60%–80% throughout the year. Methane lifetime changes against OH are affected strongest by ship emissions up to 0.21 (± 0.05)%, followed by road (0.08 (±0.01)%) and air traffic (0.05 (± 0.02)%). Based on the full scale ozone and methane perturbations positive radiative forcings were calculated for road emissions (7.3±6.2 mWm−2) and for aviation (2.9±2.3 mWm−2). Ship induced methane lifetime changes dominate over the ozone forcing and therefore lead to a net negative forcing (−25.5±13.2 mWm−2).
<p><strong>Abstract.</strong> This paper presents the first comprehensive assessment of historical (1990&#8211;2010) global anthropogenic particulate matter (PM) emissions including consistent and harmonized calculation of mass-based size distribution (PM<sub>1</sub>, PM<sub>2.5</sub>, PM<sub>10</sub>) as well as primary carbonaceous aerosols including black carbon (BC) and organic carbon (OC). The estimates were developed with the integrated assessment model GAINS, where source- and region-specific technology characteristics are explicitly included. This assessment includes a number of previously unaccounted or often misallocated emission sources, i.e., kerosene lamps, gas flaring, diesel generators, trash burning; some of them were reported in the past for selected regions or in the context of a particular pollutant or sector but not included as part of a total estimate. Spatially, emissions were calculated for 170 source regions (as well as international shipping), presented for 25 global regions, and allocated to 0.5&#176;&#8201;x&#8201;0.5&#176; longitude-latitude grids. No independent estimates of emissions from forest fires and savannah burning are provided and neither windblown dust nor unpaved roads emissions are included. <br><br> We estimate that global emissions of PM have not changed significantly between 1990 and 2010, showing a strong decoupling from the global increase in energy consumption and consequently, CO<sub>2</sub> emissions but there are significantly different regional trends, with a particularly strong increase in East Asia and Africa and a strong decline in Europe, North America and Pacific. This in turn resulted in important changes in the spatial pattern of PM burden, e.g., European, North American, and Pacific contributions to global emissions dropped from nearly 30&#8201;% in 1990 to well below 15&#8201;% in 2010, while Asia's contribution grew from just over 50&#8201;% to nearly 2/3 of the global total in 2010. For all considered PM species, Asian sources represented over 60&#8201;% of the global anthropogenic total, and residential combustion was the most important sector contributing about 60&#8201;% for BC and OC, 45&#8201;% for PM<sub>2.5</sub> and less than 40&#8201;% for PM<sub>10</sub> where large combustion sources and industrial processes are equally important. Global anthropogenic emissions of BC were estimated at about 6.6 and 7.2&#8201;Tg in 2000 and 2010, respectively, and represent about 15&#8201;% of PM<sub>2.5</sub> but for some sources reach nearly 50&#8201;%, i.e., transport sector. Our global BC numbers are higher than previously published owing primarily to inclusion of new sources. <br><br> This PM estimate fills the gap in emission data and emission source characterization required in air quality and climate modelling studies and health impact assessments at a regional and global level, as it includes both carbonaceous and non-carbonaceous constituents of primary particulate matter emissions. The developed emission data set has been used in several regional and global atmospheric transport and climate model simulations within the ECLIPSE (Evaluating the Climate and Air Quality Impacts of Short-Lived Pollutants) project and beyond, serves better parameterization of the global integrated assessment models with respect to representation of black carbon and organic carbon emissions, and built a basis for recently published global particulate number estimates.</p>
a b s t r a c tEmissions from land transport, and from road transport in particular, have significant impacts on the atmosphere and on climate change. This assessment gives an overview of past, present and future emissions from land transport, of their impacts on the atmospheric composition and air quality, on human health and climate change and on options for mitigation.In the past vehicle exhaust emission control has successfully reduced emissions of nitrogen oxides, carbon monoxide, volatile organic compounds and particulate matter. This contributed to improved air quality and reduced health impacts in industrialised countries. In developing countries however, pollutant emissions have been growing strongly, adversely affecting many populations. In addition, ozone and particulate matter change the radiative balance and hence contribute to global warming on shorter time scales. Latest knowledge on the magnitude of land transport's impact on global warming is reviewed here.In the future, road transport's emissions of these pollutants are expected to stagnate and then decrease globally. This will then help to improve the air quality notably in developing countries. On the contrary, emissions of carbon dioxide and of halocarbons from mobile air conditioners have been globally increasing and are further expected to grow. Consequently, road transport's impact on climate is gaining in importance. The expected efficiency improvements of vehicles and the introduction of biofuels will not be sufficient to offset the expected strong growth in both, passenger and freight transportation. Technical measures could offer a significant reduction potential, but strong interventions would be needed as markets do not initiate the necessary changes. Further reductions would need a resolute expansion of low-carbon fuels, a tripling of vehicle fuel efficiency and a stagnation in absolute transport volumes. Land transport will remain a key sector in climate change mitigation during the next decades.
The year 2000 radiative forcing (RF) due to changes in O 3 and CH 4 (and the CH 4-induced stratospheric water vapour) as a result of emissions of short-lived gases (oxides of nitrogen (NO x), carbon monoxide and non-methane hydrocarbons) from three transport sectors (ROAD, maritime SHIPping and AIRcraft) are calculated using results from five global atmospheric chemistry models. Using results from these models plus other published data, we quantify the uncertainties. The RF due to short-term O 3 changes (i.e. as an immediate response to the emissions without allowing for the long-term CH 4 changes) is positive and highest for ROAD transport (31 mW m À2) compared to SHIP (24 mW m À2) and AIR (17 mW m À2) sectors in four of the models. All five models calculate negative RF from the CH 4 perturbations, with a larger impact from the SHIP sector than for ROAD and AIR. The net RF of O 3 and CH 4 combined (i.e. including the impact of CH 4 on ozone and stratospheric water vapour) is positive for ROAD (þ16(AE13) (one standard deviation) mW m À2) and AIR (þ6(AE5) mW m À2) traffic sectors and is negative for SHIP (À18(AE10) mW m À2) sector in all five models. Global Warming Potentials (GWP) and Global Temperature change Potentials (GTP) are presented for AIR NO x emissions; there is a wide spread in the results from the 5 chemistry models, and it is shown that differences in the methane response relative to the O 3 response drive much of the spread.
a b s t r a c tIndia has become one of the biggest emitters of atmospheric pollutants from the road transportation sector globally. Here we present an up-to-date inventory of the exhaust emissions of ten species. This inventory has been calculated bottom-up from the vehicle mileage, differentiating by seven vehicle categories, four age/technology layers and three fuel types each, for the seven biggest cities as well as for the whole nation. The age composition of the rolling fleet has been carefully modelled, deducting about one quarter of vehicles still registered but actually out-of-service. The vehicle mileage is calibrated to the national fuel consumption which is essential to limit uncertainties. Sensitivity analyses reveal the primary impact of the emission factors and the secondary influence of vehicle mileage and stock composition on total emissions. Emission estimates since 1980 are reviewed and qualified. A more comprehensive inspection and maintenance is essential to limit pollutant emissions; this must properly include commercial vehicles. They are also the most important vehicle category to address when fuel consumption and CO 2 emissions shall be contained.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.