No abstract

No abstract

The design and development of a plastic optical fiber (POF) macrobend temperature sensor is presented. The sensor has a linear response versus temperature at a fixed bend radius, with a sensitivity of 1.92·10−3 (°C)−1. The sensor system used a dummy fiber-optic sensor for reference purposes having a resolution below 0.3 °C. A comprehensive experimental analysis was carried out to provide insight into the effect of different surrounding media on practical macro-bend POF sensor implementation. Experimental results are successfully compared with bend loss calculations.

Polymer optical fibers (POFs) doped with organic dyes can be used to make efficient lasers and amplifiers due to the high gains achievable in short distances. This paper analyzes the peculiarities of light amplification in POFs through some experimental data and a computational model capable of carrying out both power and spectral analyses. We investigate the emission spectral shifts and widths and on the optimum signal wavelength and pump power as functions of the fiber length, the fiber numerical aperture and the radial distribution of the dopant. Analyses for both step-index and graded-index POFs have been done.

Our main goal is to provide a comprehensive explanation of the existing differences in bending losses arising from having step-index multimode plastic optical fibers with different cladding thickness and under different types of conditions, namely, the variable bend radius R, the number of fiber turns, or the fiber diameter. For this purpose, both experimental and numerical result of bending losses are presented for different cladding thicknesses and conditions. For the measurements, two cladding thicknesses have been considered: one finite and another infinite. A fiber in air has a finite cladding thickness, and rays are reflected at the cladding-air interface, whereas a fiber covered by oil is equivalent to having an infinite cladding, since the very similar refractive index of oil prevents reflections from occurring at the cladding-oil interface. For the sake of comparison, numerical simulations based on ray tracing have been performed for finite-cladding step-index multimode waveguides. The numerical results reinforce the experimental data, and both the experimental measurements and the computational simulations turn out to be very useful to explain the behavior of refracting and tunneling rays along bent multimode waveguides and along finite-cladding fibers.