In this work, we investigate practical approaches of available degradation models and their usage in photovoltaic (PV) modules and systems. On the one hand, degradation prediction of models is described for the calculation of degradation at system level where the degradation mode is unknown and hence the physics cannot be included by the use of analytical models. Several statistical models are thus described and applied for the calculation of the performance loss using as case study two PV systems, installed in Bolzano/Italy. Namely, simple linear regression (SLR), classical seasonal-decomposition, seasonal-and trend-decomposition using Loess (STL), Holt-Winters exponential smoothing and autoregressive integrated moving average (ARIMA) are discussed. The performance loss results show that SLR produces results with highest uncertainties. In comparison, STL and ARIMA perform with the highest accuracy, whereby STL is favored because of its easier implementation. On the other hand, if monitoring data at PV module level are available in controlled conditions, analytical models can be applied. Several analytical models depending on different degradations modes are thus discussed. A comparison study is carried out for models proposed for corrosion. Although the results of the models in question agree in explanation of experimental observations, a big difference in degradation prediction was observed. Finally, a model proposed for potential induced degradation was applied to simulate the degradation of PV systems maximum power in three climatic zones: alpine (Zugspitze, Germany), maritime (Gran Canaria, Spain), and arid (Negev, Israel). As expected, a more severe degradation is predicted for arid climates.

Photovoltaic (PV) systems are the cheapest source of electricity in sunny locations and nearly all European countries. However, the fast deployment of PV systems around the world is bringing uncertainty to the PV community in terms of the reliability and long-term performance of PV modules under different climatic stresses, such as irradiation, temperature changes, and humidity. Methodologies and models to estimate the annual degradation rates of PV modules have been studied in the past, yet, an evaluation of the issue at global scale has not been addressed so far. Hereby, we process the ERA5 climate re-analysis dataset to extract and model the climatic stresses necessary for the calculation of degradation rates. These stresses are then applied to evaluate three degradation mechanisms (hydrolysis-degradation, thermomechanical-degradation, and photo-degradation) and the total degradation rate of PV modules due to the combination of temperature, humidity, and ultraviolet irradiation. Further on, spatial distribution of the degradation rates worldwide is computed and discussed proving direct correlation with the Köppen-Geiger-Photovoltaic climate zones, showing that the typical value considered for the degradation rate on PV design and manufacturer warranties (i.e., 0.5%/a) can vary ± 0.3%/a in the temperate zones of Europe and rise up to 1.5%/a globally. The mapping of degradation mechanisms and total degradation rates is provided for a monocrystalline silicon PV module. Additionally, we analyze the temporal evolution of degradation rates, where a global degradation rate is introduced and its dependence on global ambient temperature demonstrated. Finally, the categorization of degradation rates is made for Europe and worldwide to facilitate the understanding of the climatic stresses.

No abstract

The ever‐growing secondary market of photovoltaic (PV) systems (i.e., the transaction of solar plants ownership) calls for reliable and high‐quality long‐term PV degradation forecasts to mitigate the financial risks. However, when long‐term PV performance degradation forecasts are required after a short time with limited degradation history, the existing physical and data‐driven methods often provide unrealistic degradation scenarios. Therefore, we present a new data‐driven method to forecast PV lifetime after a small performance degradation of only 3%. To achieve an accurate and reliable forecast, the developed method addresses the fundamental challenges that usually affect long‐term degradation evaluation such as data treatment, choosing a good degradation model, and understanding the different degradation patterns. In the paper, we propose and describe an algorithm for degradation trend evaluation, a new concept of multiple “time‐ and degradation pattern‐dependent” degradation factors. The proposed method has been calibrated and validated using different PV modules and systems data of 5 to 35 years of field exposure. The model has been benchmarked against existing statistical models evaluating 11 experimental PV systems with different technologies. The key advantage of our model over statistical ones is the ability to perform more reliable forecasts with limited degradation history. With an average relative uncertainty of 7.0%, our model is outstanding in consistency for different forecasting time horizons. Moreover, the model is applicable to all PV technologies. The proposed method will aid in making reliable financial decisions and also in adequately planning operation and maintenance activities.

No abstract

The market for Photovoltaic systems has experienced an enormous growth worldwide and will further grow over the coming decades. Investments in Photovoltaics became an important financial product with the special feature of very long contract durations. Typically operation of over 20 years is expected, during which generation of electricity and revenues are expected. Due to these long operational times, quality, durability, reliability, and degradation rates become crucial for the investment. PV modules are the dominating components in this regard since they prevail the investment. Accelerated ageing tests are in general used to ensure the quality of photovoltaic components. These tests are partly standardized, for PV mainly by IEC and are used for type approval or safety testing. Accelerated ageing tests are also adapted to specific needs and e g used for Quality Assurance (QA) of manufacturers or Service Life Prediction (SLP) by manufacturers or research institutes. All the efforts are taken to gain knowledge about the behaviour of PV modules in operation and thus the accelerated tests have to be related to normal operation. Since PV is used around the globe, the conditions vary significantly depending on the location of installation. In addition, the installation has severe influence on the operational conditions of PV modules. The papers attempt is to give an overview on the state of the art of accelerated testing and field performance analysis of PV modules with focus on developments over the last five to ten years. Developments are described and the status is analysed regarding the significance of tests including the latest developments and open scientific gaps related to the envisaged correlation of accelerated tests with field performance. The reader is enabled to differenciate between reliability testing and service life prediction. The understanding for a comprehensive approach of reliability testing including field evaluation data is develope

The rapid growth in grid penetration of photovoltaic (PV) calls for more accurate methods to forecast the performance and reliability of PV. Several methods have been proposed to forecast the PV power generation at different temporal horizons. In this chapter the different methods used in PV power forecasting are described with an example on their applications and related uncertainty. The methods discussed include physical, heuristic, statistical and machine learning methods. When benchmarked, it is shown that physical method showed the highest uncertainties compared to other methods. In the chapter, the effect of degradation on lifetime PV power and energy forecast is also assessed using linear and non-linear degradation scenarios. It is shown that the relative difference in lifetime yield prediction is over 5% between linear and non-linear scenarios.

No abstract