This study investigates solid particle erosive wear behavior of glass mat reinforced polyphenylene sulfide (PPS) matrix composites under A preliminary draft of this article was presented at the Fifth International Workshop on Thermoplastic Matrix Composites (THEPLAC 2011), various test parameters. PPS composite was manufactured by using the compression-molding process. Composite samples were eroded in a specially designed sandblasting system employing various parameters, and variation of the erosion rate was investigated. Samples were eroded at different erosion times, particle impingement angles, and under various pressures by using three different sizes of alumina particles. Impingement velocities of erodent particles were measured by using the double disk method. The results are also discussed regarding impingement velocity of the erodent particles. Glass mat reinforced PPS composites exhibited semiductile erosion behavior by showing a maximum erosion rate at 30 • and 45 • impingement angles. The erosion rate of the composite was increased with augmentation in erosion time, velocity, pressure, and particle size. Maximum erosion was observed when the composite was eroded after 10 s at 45 • impingement angle under 4 bar pressure by using 60 mesh size erodent particles. The morphology of eroded surfaces was examined by using a scanning electron microscope, and possible wear mechanisms were discussed. C 2012 Wiley Periodicals, Inc. Adv Polym Techn 32: E386-E398, 2013; View this article online at wileyonlinelibrary.com.
Conventional expandable polystyrene (EPS) was modified by the preparation of copolymers containing 1.0, 2.5, and 5.0% ␣-methylstyrene. Increasing the glasstransition temperature of EPS was the aim of this work. Copolymeric expandable polystyrene (CEPS) samples were characterized with various techniques.1 H-NMR spectroscopy was used for the determination of the composition, and gel permeation chromatography was used for the determination of the molecular weights and molecular weight distributions. Differential scanning calorimetry showed that the glass-transition temperatures of the CEPS samples increased with increasing ␣-methylstyrene contents. The prevention of the collapse of the EPS cells was observed in scanning electron microscopy images of the inner portions and outer surfaces of the CEPS samples.
Conventional expandable polystyrene (EPS) was modified by the preparation of copolymers containing 0.10%, 0.25%, and 0.50% silicone acrylate. Copolymeric expandable polystyrene (CEPS) samples were characterized with various techniques.1 H-NMR spectroscopy was used for the determination of composition, and gel permeation chromatography was used for the determination of molecular weight and molecular weight distribution. Differential scanning calorimetry showed that the glass-transition temperatures of the CEPS samples increased with an increasing silicone acrylate content. The surface properties of the copolymers were investigated by contact angle measurement and SEM imaging.
Conventional expandable polystyrene (EPS) was chemically modified by preparing copolymers containing 0.1%, 0.2%, and 0.5% siloxane-based macroinitiator. This was used to enhance the surface and thermal properties of EPS particles. Copolymeric expandable polystyrene samples were characterized with various techniques including 1 H-NMR, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, and contact angle measurement.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.