The purpose of this study is to determine whether sodium alginate solutions' rheological parameters are meaningful relative to sodium alginate's use in the formulation of calcium alginate gels. Calcium alginate gels were prepared from six different grades of sodium alginate (FMC Biopolymer), one of which was available in ten batches. Cylindrical gel samples were prepared from each of the gels and subjected to compression to fracture on an Instron Universal Testing Machine, equipped with a 1-kN load cell, at a cross-head speed of 120 mm/min. Among the grades with similar % G, (grades 1, 3, and 4), there is a significant correlation between deformation work (L(E)) and apparent viscosity (η(app)). However, the results for the partial correlation analysis for all six grades of sodium alginate show that L(E) is significantly correlated with % G, but not with the rheological properties of the sodium alginate solutions. Studies of the ten batches of one grade of sodium alginate show that η(app) of their solutions did not correlate with L(E) while tan δ was significantly, but minimally, correlated to L(E). These results suggest that other factors--polydispersity and the randomness of guluronic acid sequencing--are likely to influence the mechanical properties of the resultant gels. In summary, the rheological properties of solutions for different grades of sodium alginate are not indicative of the resultant gel properties. Inter-batch differences in the rheological behavior for one specific grade of sodium alginate were insufficient to predict the corresponding calcium alginate gel's mechanical properties.

It is necessary to have excipients with excellent functional properties to compensate for the poor mechanical properties and low aqueous solubility of the emerging active ingredients. Therefore, around 80% of the current drugs are not suitable for direct compression and more advanced excipients are required. Further, conventional grades of excipients cannot accommodate the technologically advanced high speed rotary tablet presses which require a powder with excellent flow, good compressibility, compactibility, particle size distribution and homogeneity of the ingredients. Co-processed excipients have been created to enhance the functional properties of the excipients and reduce their drawbacks. Co-processing is defined as the combination of two or more excipients by a physical process. Co-processed excipients are adequate for direct compression since they become multifunctional and thus, their dilution potential is high eliminating the need for many excipients in a formulation. In some cases, they are able to hold up to 50% of the drug in a formulation rendering compacts of good tableting properties. This study describes and discusses the functionality enhancement of commercial and investigational excipients through co-processing.

The expansion of a novel in silico model for the prediction of the dispersability of 18 model compounds with polyvinylpyrrolidone-vinyl acetate copolymer is described. The molecular descriptor R3m (atomic mass weighted 3rd-order autocorrelation index) is shown to be predictive of the formation of amorphous solid dispersions at 2 drug loadings (15% and 75% w/w) using 2 preparation methods (melt quenching and solvent evaporation using a rotary evaporator). Cosolidified samples were characterized using a suite of analytical techniques, which included differential scanning calorimetry, powder X-ray diffraction, pair distribution function analysis, polarized light microscopy, and hot stage microscopy. Logistic regression was applied, where appropriate, to model the success and failure of compound dispersability in polyvinylpyrrolidone-vinyl acetate copolymer. R3m had combined prediction accuracy greater than 90% for tested samples. The usefulness of this descriptor appears to be associated with the presence of heavy atoms in the molecular structure of the active pharmaceutical ingredient, and their location with respect to the geometric center of the molecule. Given the higher electronegativity and atomic volume of these types of atoms, it is hypothesized that they may impact the molecular mobility of the active pharmaceutical ingredient, or increase the likelihood of forming nonbonding interactions with the carrier polymer.

No abstract