In the brewing process, the consumption of resources and the amount of waste generated are high and due to a lot of organic compounds in waste-water, the capacity of natural regeneration of the environment is exceeded. Residual yeast, the second by-product of brewing is considered to have an important chemical composition. An approach with nutritional potential refers to the extraction of bioactive compounds from the yeast cell wall, such as β-glucans. Concerning the potential food applications with better textural characteristics, spent brewer’s yeast glucan has high emulsion stability and water-holding capacity fitting best as a fat replacer in different food matrices. Few studies demonstrate the importance and nutritional role of β-glucans from brewer’s yeast, and even less for spent brewer’s yeast, due to additional steps in the extraction process. This review focuses on describing the process of obtaining insoluble β-glucans (particulate) from spent brewer’s yeast and provides an insight into how a by-product from brewing can be converted to potential food applications.
β-glucan extraction from spent brewer’s yeast is a long process that starts with the lysis of yeast cells, this step lasting up to 36 h and can be disadvantageous when working on a small scale. In this study, a rapid cell rupture method was selected for the lysis of spent brewer’s yeast to obtain β-glucans. Optimal parameters were determined for the lysis of a cellular suspension of spent brewer’s yeast by vortexing with glass beads. Thus, parameters such as the number of 10 min vortex cycles from 1 to 3, the concentration of cell suspension (5, 10, and 15%), and the ratio of yeast/glass beads (1:1, 1:2, and 1:3) were varied in a Box-Behnken design. A cell lysis mechanism using glass beads allows the cell to rupture and permits the removal of intracellular content. An increase in yeast suspension concentration decreased the disruption efficiency, while a proportional increase was observed with the yeast/glass beads ratio and the increasing number of vortexing cycles. The optimal parameters for cell lysis were found to be a cell suspension concentration of 5%, a ratio of yeast/glass beads of 1:2, and a vortexing cycle of 3, with a disruption efficiency of 99.8%. The β-glucan fraction extracted from the optimal sample showed characteristic absorption bands at 1370.77 and 1153.92 cm−1, the content of β-glucan being 78.53%.
The aim of this study was to develop films based on β–glucans in association with pomegranate juice for its potential in metabolic disorders such as diabetes due to plenty of bioactive compounds from the film composition. Initially, a Box-Behnken design was generated by varying the level of β–glucan content (0.5, 1, 1.5 g), sodium alginate (0.2, 0.4, 0.6 g) and pomegranate juice (10, 20, 30 mL) for development of films. Subsequently, glycerin was added as 25% of the total dry matter. The optimization of the films prepared by the solvent casting method was conducted based on the different responses such as: water vapor transmission rate (WVTR), water vapor permeability (WVP), thickness, density, moisture content, solubility, film opacity and color. The water activity profile and FT–IR analysis were performed in all tests. The model was used to determine the optimal experimental values considering that the optimal film will make a sustained contribution to diabetes. The optimal values of the film sample made of β–glucans, sodium alginate, pomegranate juice and glycerin make it befitting for packaging dry powdered pharmaceuticals. Finally, antimicrobial activity against Gram-negative and Gram-positive bacteria, UV barrier properties and microcrack and pore detections through SEM were also investigated for the optimal film sample.
This study provides new insight into developed bioactive films. The development of film-forming solutions from different fruit juices has demonstrated a major impact of bioactive compounds in film formulation, from smart packaging to bioactive packaging that releases the compounds from the oral solution at the same time as the packaged product. There were significant influences among independent parameters such as yeast β-glucan, gelling agent, fruit juice, or surfactant for each individual film. However, in this study, it was found that the amount of juice was the most significant factor in assigning their properties to all three types of films made of different juices (pomegranate, bilberry, and cranberry). Properties such as WVTR through the film varied within quite wide limits between 3.2562 and 32.1869 g/h·m2, while their solubilization time started from a few seconds for a complete dissolution or ensured only partial dissolution after 10 min of stirring (in the case of films made of β-glucan and cranberry juice). Therefore, natural biopolymer-based films developed with excellent water vapor barrier properties and improved solubility have a huge potential for application as packaging materials for dry powdered such as pharmaceuticals.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.