No abstract

No abstract

Lignin, one of the three main structural biopolymers of lignocellulosic biomass, is the most abundant natural source of aromatics with a great valorization potential towards the production of fuels, chemicals, and polymers. Although kraft lignin and lignosulphonates, as byproducts of the pulp/paper industry, are available in vast amounts, other types of lignins, such as the organosolv or the hydrolysis lignin, are becoming increasingly important, as they are side-streams of new biorefinery processes aiming at the (bio)catalytic valorization of biomass sugars. Within this context, in this work, we studied the thermal (non-catalytic) and catalytic fast pyrolysis of softwood (spruce) and hardwood (birch) lignins, isolated by a hybrid organosolv–steam explosion biomass pretreatment method in order to investigate the effect of lignin origin/composition on product yields and lignin bio-oil composition. The catalysts studied were conventional microporous ZSM-5 (Zeolite Socony Mobil–5) zeolites and hierarchical ZSM-5 zeolites with intracrystal mesopores (i.e., 9 and 45 nm) or nano-sized ZSM-5 with a high external surface. All ZSM-5 zeolites were active in converting the initially produced via thermal pyrolysis alkoxy-phenols (i.e., of guaiacyl and syringyl/guaiacyl type for spruce and birch lignin, respectively) towards BTX (benzene, toluene, xylene) aromatics, alkyl-phenols and polycyclic aromatic hydrocarbons (PAHs, mainly naphthalenes), with the mesoporous ZSM-5 exhibiting higher dealkoxylation reactivity and being significantly more selective towards mono-aromatics compared to the conventional ZSM-5, for both spruce and birch lignin.

Thec atalytic activity of supported silver nanoparticles on mesoporous silica was studied, for the selectiver eduction of azines into benzyl hydrazones using sodium borohydride as mild reducing agent. Different sizes of silver nanoparticles supported on mesoporous silica (Ag/HMS) were successfully prepared by two methods,i .e., wet impregnationf ollowed by reductionw ith hydrogena t3 50 8 8Ca nd in situ deposition/reduction with am ixture of amines (ethanolamine and ethylenediamine).T he Ag/HMS (amines) catalyst was found to promote the selective 1,2-reduction of aryl-substituted azines, comparedt o the corresponding 1,4-reductiont hat occurs in general reduction processes. This catalytic transfer hydrogenation process found to be clean, fast andq uantitative (> 99% yields and selectivity) towards benzyl hydrazone synthesis under mild conditions.O fg reat importance is that under the presentc atalytic condi-tions reducible functional groups remain intact. Formal kinetics, support the in situ formation of silver hydride species being responsible for the reductionp rocess.T he presence of protic polarm ethanol enhanced the catalytic activity of Ag/HMS. Basedo nt he recycling studies the catalytic system Ag/HMS-NaBH 4 wasf ound to catalyze the selective reductiono fa zines nine times without significant loss of its activity.F inally,ao ne-pot reactionb etween the in situ produced benzylh ydrazones and a series of nitrostyrenes readilyp rovided the regioselective synthesiso f1 ,3,5-subtituted pyrazoles,h ighlightingau seful synthetic application of the catalytic protocol.

The management of municipal and industrial organic solid wastes has become one of the most critical environmental problems in modern societies. Nowadays, commonly used management techniques are incineration, composting, and landfilling, with the former one being the most common for hazardous organic wastes. An alternative eco-friendly method that offers a sustainable and economically viable solution for hazardous wastes management is fast pyrolysis, being one of the most important thermochemical processes in the petrochemical and biomass valorization industry. The objective of this work was to study the application of fast pyrolysis for the valorization of three types of wastes, i.e., petroleum-based sludges and sediments, residual paints left on used/scrap metal packaging, and creosote-treated wood waste, towards high-added-value fuels, chemicals, and (bio)char. Fast pyrolysis experiments were performed on a lab-scale fixed-bed reactor for the determination of product yields, i.e., pyrolysis (bio)oil, gases, and solids (char). In addition, the composition of (bio)oil was also determined by Py/GC-MS tests. The thermal pyrolysis oil from the petroleum sludge was only 15.8 wt.% due to the remarkably high content of ash (74 wt.%) of this type of waste, in contrast to the treated wood and the residual paints (also containing 30 wt.% inorganics), which provided 46.9 wt.% and 35 wt.% pyrolysis oil, respectively. The gaseous products ranged from ~7.9 wt.% (sludge) to 14.7 (wood) and 19.2 wt.% (paints), while the respective solids (ash, char, reaction coke) values were 75.1, 35, and 36.9 wt.%. The thermal (non-catalytic) pyrolysis of residual paint contained relatively high concentrations of short acrylic aliphatic ester (i.e., n-butyl methacrylate), being valuable monomers in the polymer industry. The use of an acidic zeolitic catalyst (ZSM-5) for the in situ upgrading of the pyrolysis vapors induced changes on the product yields (decreased oil due to cracking reactions and increased gases and char/coke), but mostly on the pyrolysis oil composition. The main effect of the ZSM-5 zeolite catalyst was that, for all three organic wastes, the catalytic pyrolysis oils were enriched in the value-added mono-aromatics (BTX), especially in the case of the treated wood waste and residual paints. The non-condensable gases were mostly consisting of CO, CO2, and different amounts of C1–C4 hydrocarbons, depending on initial feed and use or not of the catalyst that increased the production of ethylene and propylene.