The valorization of lignin that derives as by product in various biomass conversion processes has become a major research and technological objective. The potential of the production of valuable mono-aromatics (BTX and others) and (alkyl)phenols by catalytic fast pyrolysis of lignin is investigated in this work by the use of ZSM-5 zeolites with different acidic and porosity characteristics. More specifically, conventional microporous ZSM-5 (Si/Al = 11.5, 25, 40), nano-sized (≤20 nm, by direct synthesis) and mesoporous (9 nm, by mild alkaline treatment) ZSM-5 zeolites were tested in the fast pyrolysis of a softwood kraft lignin at 400–600°C on a Py/GC-MS system and a fixed-bed reactor unit. The composition of lignin (FT-IR, 2D HSQC NMR) was correlated with the composition of the thermal (non-catalytic) pyrolysis oil, while the effect of pyrolysis temperature and catalyst-to-lignin (C/L) ratio, as well as of the Si/Al ratio, acidity, micro/mesoporosity and nano-size of ZSM-5, on bio-oil composition was thoroughly investigated. It was shown that the conventional microporous ZSM-5 zeolites are more selective toward mono-aromatics while the nano-sized and mesoporous ZSM-5 exhibited also high selectivity for (alkyl)phenols. However, the nano-sized ZSM-5 zeolite exhibited the lowest yield of organic bio-oil and highest production of water, coke and non-condensable gases compared to the conventional microporous and mesoporous ZSM-5 zeolites.

No abstract

No abstract

No abstract

Acetone and ethanol extraction of lignin deposits from the surface of hydrothermally (liquid hot water) pretreated beech wood biomass alleviates the lignin inhibitory effects during enzymatic hydrolysis of cellulose to glucose and boosts the enzymatic digestibility to high values (≈70 %). Characterization of the extracted lignins (FTIR, pyrolysis/GC–MS, differential thermogravimetry, gel permeation chromatography) indicated high purity, low molecular weight, and features that suggest that it consists mainly of fragments of the native wood lignin partially depolymerized and recondensed on the biomass surface during the hydrothermal pretreatment. The pyrolysis products of the extracted surface lignins suggest their high potential as a feedstock for the production of high added value phenolic compounds. When the enzymatic hydrolysis of the pretreated and extracted biomass solids was assisted by mild wet milling, near complete cellulose digestibility (≥95 %) could be achieved. In the context of the biorefinery and whole‐biomass valorization concept, it was also shown that the hydrothermally (hemicellulose‐deficient) pretreated and delignified biomass solids could be also successfully used for the production of crude cellulase from Trichoderma reesei cultures, providing a simple and low‐cost method for the complementary production of cellulases by utilizing fractions of the integrated hydrolysis process.