PostprintThis is the accepted version of a paper published in Fuel processing technology. This paper has been peer-reviewed but does not include the final publisher proof-corrections or journal pagination.Citation for the original published paper (version of record):Weiland, F., Nordwaeger, M., Olofsson, I., Wiinikka, H., Nordin, A. (2014) Entrained flow gasification of torrefied wood residues. In this work, four different fuels were gasified in a pressurized entrained flow pilot plant 12 gasifier at approximately 270 kW th . The different fuels were; two torrefied wood 13 residues, one raw wood residue and one torrefied stem wood. The system pressure and 14 oxygen equivalence ratio (!) were held constant for all four gasification experiments. It 15 was found that the torrefaction pretreatment significantly reduced the milling energy 16 consumption for fuel size reduction, which in turn contributed to increased gasification 17 plant efficiency. Furthermore, the results indicate that the carbon conversion efficiency • The torrefaction pretreatment reduced the milling energy consumption. 2• Torrefaction pretreatment contributed to increased gasification plant efficiency. 3• The fuel carbon conversion efficiency was affected by torrefaction pretreatment. 4• The CH 4 yield from gasification was reduced for severely torrefied fuel. 5
PostprintThis is the accepted version of a paper published in Bioresource Technology. This paper has been peerreviewed but does not include the final publisher proof-corrections or journal pagination.Citation for the original published paper (version of record):Svanberg, M., Olofsson, I., Floden, J., Nordin, A. (2013) Analysing biomass torrefaction supply chain costs. Abstract: The objective of the present work was to develop a techno-economic system model to evaluate how logistics and production parameters affect the torrefaction supply chain costs under Swedish conditions. The model consists of four sub-models: (1) supply system, (2) a complete energy and mass balance of drying, torrefaction and densification, (3) investment and operating costs of a green field, stand-alone torrefaction pellet plant, and (4) distribution system to the gate of an end user. The results show that the torrefaction supply chain reaps significant economies of scale up to a plant size of about 150-200 kiloton dry substance per year (ktonDS/year), for which the total supply chain costs accounts to 31.8 euro per megawatt hour based on lower heating value (€/MWhLHV). Important parameters affecting total cost are amount of available biomass, biomass premium, logistics equipment, biomass moisture content, drying 2 technology, torrefaction mass yield and torrefaction plant capital expenditures (CAPEX).
A compilation was made of the composition of peat from different areas in Sweden, of which a selected set was characterized and co-combusted with forest residue in controlled fluidized-bed agglomeration tests with extensive particle sampling. The variation in ash-forming elements in the different peat samples was large; thus, eight peat samples were selected from the compilation to represent the variation in peat composition in Sweden. These samples were characterized in terms of botanical composition, analyzed for ash-forming elements, and oxidized using a low-temperature ashing procedure, followed by characterization using scanning electron microscopy/electron-dispersive spectroscopy (SEM/EDS) and X-ray diffraction (XRD). The selected peat samples had in common the presence of a small fraction of crystalline phases, such as quartz, microcline, albite, and calcium sulfate. The controlled fluidized-bed agglomeration tests that co-combusted forest residue with peat resulted in a significant increase in agglomeration temperatures compared to combusting forest residue alone. Plausible explanations for this were an increase of calcium, iron, or aluminum in the bed particle layers and/or the reaction of potassium with clay minerals, which prevented the formation of low-melting bed particle layers. The effects on particle and deposit formation during co-combustion were reduced amounts of fine particles and an increased number of coarse particles. The mechanisms for the positive effects were a transfer and/or removal of potassium in the gas phase to a less reactive particular form via sorption and/or a reaction with the reactive peat ash (SiO 2 and CaO), which in most cases formed larger particles (>1 μm) containing calcium silicon and potassium.
No abstract
Visible and near infrared imaging techniques for analysing characteristics of torrefied biomass were evaluated for possible use in future online process control. The goal of such a control system is to identify products with the desired properties and reject products outside the specification. Two pushbroom hyperspectral cameras with different wavelength regions and a commercial digital colour camera were evaluated. The hyperspectral cameras, short wave infrared (SWIR) and visible-near infrared (VNIR), covered the ranges of 1000-2500 nm and 400-1000 nm, respectively. The biomass was produced according to an experimental design in a torre faction pilot plant at different temperatures, residence times, and nitrogen and steam flow rates to obtain a wide range of different characteristics and qualities of torrefied material. Chemical characteristics, heating values and milling energy of the different torrefied materials were analysed or calculated using standardized procedures and were used for calibration. For the hyperspectral images, a principal-component analysis was performed on the absorbance spectra. The score plots and score images were used interactively to separate background, outlier pixels and shading effects from sample signal. Averaged spectra of individual torrefied woodchips were used. Partial leastsquares regression was used to relate average spectra to heating values and chemical characteristics of the torrefied biomass. Owing to the small size of the data sets, cross-validation using leave-one-out validation was used for testing the models. The ratio of standard error of prediction to sample standard deviation (RPD) values were used for comparing the imaging techniques. For RGB images, all RPD values were 4 or lower. The RPD values for the VNIR technique were all below 5, while the SWIR images produced RPD values above 5 for eight of the 13 properties. The promising results of the SWIR technique strongly suggested that the torrefied biomass undergoes changes to chemical structures, which are not necessarily manifested as changes to the colour of the material.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.