Articles you may be interested inEffect of metal-ion doping on the optical properties of nanocrystalline ZnO thin films

Nanodiamond crystals containing single color centers have been grown by chemical vapor deposition (CVD). The fluorescence from individual crystallites was directly correlated with crystallite size using a combined atomic force and scanning confocal fluorescence microscope. Under the conditions employed, the optimal size for single optically active nitrogen-vacancy (NV) center incorporation was measured to be 60-70 nm. The findings highlight a strong dependence of NV incorporation on crystal size, particularly with crystals less than 50 nm in size.

In this paper, we establish connections between the thresholds and mechanisms of the damage and white-light generation upon femtosecond laser irradiation of wide-bandgap transparent materials. On the example of Corning Willow glass, evolution of ablation craters, their quality, and white-light emission were studied experimentally for 130-fs, 800-nm laser pulses. The experimental results indicate co-existence of several ablation mechanisms which can be separated in time. Suppression of the phase explosion mechanism of ablation was revealed at the middle of the irradiation spots. At high laser fluences, air ionization was found to strongly influence ablation rate and quality and the main mechanisms of the influence are analysed. To gain insight into the processes triggered by laser radiation in glass, numerical simulations have been performed with accounting for the balance of laser energy absorption and its distribution/redistribution in the sample, including bremsstrahlung emission from excited free-electron plasma. The simulations have shown an insignificant role of avalanche ionization at such short durations of laser pulses while pointing to high average energy of electrons up to several dozens of eV. At multi-pulse ablation regimes, improvement of crater quality was found as compared to single/few pulses.

No abstract

Nanoparticle (NP) films of silver were prepared using nanosecond (ns) and femtosecond (fs) pulsed laser deposition (PLD) in vacuum. The flux and energy distribution of the ions in the plasma part of the ablation plume were measured using a Langmuir ion probe. The deposition energy efficiencies of ns and fs silver PLD were also compared. For equivalent thickness up to ∼3 nm the NPs made by ns-PLD are well separated and roughly circular, but for higher thicknesses the NPs begin to coalesce. For equivalent thickness up to 7 nm the fs films are comprised of well separated NPs, though the mean NP size and the surface coverage increase with equivalent thickness. The mean Feret diameter for both ns- and fs-PLD films increases with increasing equivalent solid-density thickness. The surface plasmon resonance peak was observed to red shift for both ns- and fs-PLD films as the equivalent solid-density thickness was increased from 1 nm to 7 nm.

Laser treatment of amorphous TiO2 nanotube layers leads to their crystallization without deformation or formation of the thermal oxide layer.

No abstract

No abstract