No abstract

The fast depletion of fossil fuels has attracted researchers worldwide to explore alternative biofuels, such as biodiesel. In general, the production of biodiesel is carried out via transesterification processes of vegetable oil with the presence of a suitable catalyst. A mixed metal oxide has shown to be a very attractive heterogeneous catalyst with a high performance. Most of the mixed metal oxide is made by using the general wetness impregnation method. A simple route to synthesize silane-modified mixed metal oxide (CaO-CuO/C6) catalysts has been successfully developed. A fluorocarbon surfactant and triblock copolymers (EO)106(PO)70(EO)106 were used to prevent the crystal agglomeration of carbonate salts (CaCO3-CuCO3) as the precursor to form CaO-CuO with a definite size and morphology. The materials show high potency as a catalyst in the transesterification process to produce biodiesel. The calcined co-precipitation product has a high crystallinity form, as confirmed by the XRD analysis. The synthesized catalyst was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The mechanism of surface modification and the effects of the catalytic activity were also discussed. The biodiesel purity of the final product was analyzed by gas chromatography. The optimum biodiesel yield was 90.17% using the modified mixed metal oxide CaO-CuO/C6.

The low-cost composite film was prepared by incorporating chitosan, berry soap fruit extract (rarasaponin), and bentonite as the raw materials. The produced chitosan/rarasaponin/bentonite (CRB) composite exhibits outstanding adsorption capability toward copper metal ions (Cu(II)). A series of static adsorption experiments were carried out to determine the isotherm and kinetic properties of CRB composite in the adsorption process. The adsorption equilibrium shows a good fit with the Langmuir isotherm model; the CRB composite has maximum uptake of Cu (II) of 412.70 mg/g; the kinetic adsorption data exhibit a good fit with the pseudo-second-order model. The thermodynamic parameters, ΔH°, ΔG°, and ΔS°, obtained from the isotherm data indicate that the uptake of copper ions by CRB composite is more favored at low temperatures. This study shows that physicochemical modified adsorbent, namely CRB composite, can remove Cu (II) better than pristine adsorbent of AAB and chitosan. The CRB composite also shows potential reusability.

No abstract