A low-profile planar multiple-input multiple-output (MIMO) antenna consisting of four elements with isolation improvement is proposed for 5G mm Wave (24–40) GHz applications. Each radiating element of the MIMO antenna comprises of a microstrip-fed tilted spade-shaped radiator with four asymmetrical slots and a partial ground plane. The antenna is optimized to resonate at 35 GHz covering a wide impedance bandwidth from 23.9 to 40.1 GHz. Two cross lines are then loaded between the antenna elements to improve the isolation
>
−
30
d
B
. The MIMO structure with the decoupling lines is fabricated and tested. The measured results are in good correlation with the simulated results. Other MIMO performance metrics such as the envelope correlation coefficient (ECC), channel capacity loss (CCL), diversity gain (DG), and total active reflection coefficient (TARC) are examined, and the results are found to be satisfactory for the device to be used for mm-wave 5G MIMO applications. Also, the antenna’s performance metrics such as radiation efficiency, gain, and radiation patterns over the operating band are presented.
A dual-band microstrip antenna operating at GSM 900 and GSM 1800 MHz is designed initially. Then a single split ring resonator (SRR) structure is used as a superstrate for this dual-band antenna. A circular current is induced in the SRR due to the perpendicular plane wave excitation, which in turn leads to an electric excitation coupled to the magnetic resonance. It also exhibits higher order excitations at 0.9 and 1.8 GHz which ultimately resulted in specific absorption rate (SAR) reduction of human head at both the designed frequencies of the antenna. The antenna and the SRR superstrate are printed on a 1.6 mm thick FR-4 substrate of dimension 59.6 × 49.6 mm. Analysis of the SRR using the classic waveguide theory approach is discussed. Radiation pattern of the antenna in the presence of SRR superstrate and human head is also discussed. Prototype of the antenna along with the SRR superstrate is fabricated and measured for return loss and radiation pattern. Measurement results fairly agree with the simulated results. A human head phantom is utilized in the calculation of SAR.
In this paper an experimental RF energy harvester using rectifying antenna (rectenna) to harvest ambient energy from cellular device operating at 900 MHz GSM band is proposed. The circuit is a combination of antenna and rectifying circuit using Schottky barrier diode for microwave (RF) to DC conversion. The performance results of the rectenna shows radiation efficiency of around 58.81%, gain of 3.9 dB and directivity of 5.972 dBi. The proposed rectenna design can prove to be a low cost device for wireless power transmission and RF energy harvesting. The prototype is fabricated with simulated and measured results in good agreement, having a return loss of 21 dB at frequency of around 885 MHz. The overall efficiency is enhanced by using ISS351-TB-E Schottky diode which is categorized by a low junction capacitance and a low threshold voltage to achieve higher conversion efficiency.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.