Because of the problems associated with the generation and storage of hydrogen in portable applications, the use of ammonia has been proposed for on-site production of hydrogen through ammonia decomposition. First, an analysis of the existing systems for ammonia decomposition and the challenges for this technology are presented. Then, the state of the art of the catalysts used to date for ammonia decomposition is described considering the catalysts composed of noble and non-noble metals and their combinations, as well as novel materials such as alkali metal amides and imides. The effect of the supports and promoters used is analyzed in detail, and the catalytic activity obtained is compared. An analysis of the kinetics of the reaction obtained with different catalysts is also presented and discussed, including the reaction mechanism, the determining step of the reaction, and the apparent activation energy. Finally, the structured reactors used to date for the decomposition reaction of ammonia are explored, as well as the possibilities offered by catalytic membrane reactors, which allow the on-site simultaneous production and separation of hydrogen.

Ceria-supported Ni, Ru and Ni-Ru catalysts have been tested in the catalytic decomposition of ammonia to yield hydrogen and their performance in long-term tests has been compared to alumina-supported Ni and Ru samples. The catalysts have been characterized by XRD, TPR, NH 3 -TPD, HAADF-STEM, SEM, BET and XPS. Ceria-based samples are more active in ammonia decomposition with respect to their alumina-based counterparts, which has been ascribed to a particular metal-support interaction, while acidity does not seem to play an important role. Ru-based catalysts are more active than Ni-based samples, but they deactivate rapidly, in particular the Ru/Al 2 O 3 sample. This is ascribed to loss of exposed Ru, as demonstrated by XPS and HAADF-STEM. Considering the high cost and limited availability of Ru, the Ni/CeO 2 catalyst appears as a promising system for ammonia decomposition due to its good performance and low cost. In situ XPS experiments reveal that the active sites for the catalytic decomposition of ammonia are metallic Ni and Ru. Bimetallic Ni-Ru catalysts do not outperform their monometallic counterparts, irrespective of the order in which the metals are added.

The development of better catalysts is a passionate topic at the forefront of modern science, where operando techniques are necessary to identify the nature of the active sites. The surface of a solid catalyst is dynamic and dependent on the reaction environment and, therefore, the catalytic active sites may only be formed under specific reaction conditions and may not be stable either in air or under high vacuum conditions. The identification of the active sites and the understanding of their behaviour are essential information towards a rational catalyst design. One of the most powerful operando techniques for the study of active sites is near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS), which is particularly sensitive to the surface and sub-surface of solids. Here we review the use of NAP-XPS for the study of ceria-based catalysts, widely used in a large number of industrial processes due to their excellent oxygen storage capacity and well-established redox properties.

No abstract

No abstract