A municipal wastewater treatment plant (WWTP) is a melting pot of numerous pharmaceuticals and personal care products (PPCPs) together with many other substances. The removal of PPCPs using advanced oxidation processes within a WWTP is one way to reduce the amount of PPCPs that potentially enter an aquatic environment. The aim of this study was to examine the effectiveness of the ozone (O3)/UV treatment process, especially, the effects of O3 dose and reaction time, on the removal of PPCPs in the secondary effluent of a WWTP. Experiments were conducted using a pilot-scale treatment process that consisted of two flow-through reactors connected in series. Each reactor was equipped with three 65 W lamps (UV65W). The experimental variables were ozone dosage (1, 2, 3, 4, and 6 mg L−1) and hydraulic retention time (HRT; 5 and 10 min). On the basis of the PPCP concentrations after O3/UV65W treatment and their limit of detection (LOD), 38 PPCPs detected in the secondary effluent were classified into 5 groups ranging from the category of “sensitive” to O3/UV65W or “unstable” in the O3/UV65W process to the category of “insensitive” to O3/UV65W or “very stable” in the O3/UV65W process.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.