RESUMO -O aumento na produção de glicerol, nos últimos anos, se deu pelas constantes pesquisas por fontes alternativas de energia, gerando uma demanda na busca por novas tecnologias para sua purificação. Entre os vários processos de separação, a adsorção se apresenta como uma opção favorável para a remoção dos contaminantes do glicerol, devido ao seu baixo custo e simplicidade de operação. Diante disso, esse trabalho propõe o estudo cinético e termodinâmico do processo de adsorção para purificação do glicerol, utilizando diferentes adsorventes, sendo eles: Argila clarificante Pure-Flo Supreme B81, carvão ativado e terra diatomácea. Para isso, foi utilizada uma solução sintética de glicerol, constituída de glicerina PA e óleo de soja. Os resultados obtidos em diferentes temperaturas mostram que os dados experimentais foram bem relacionados com as isotermas de Langmuir, Freundlich e Redlich-Peterson. Os valores negativos da variação da energia livre de Gibbs indica que a adsorção do óleo de soja é um processo espontâneo, enquanto que a entalpia, negativa para a argila e o carvão, e positivo para a terra, indicam que o processo de adsorção é endotérmico e exotérmico, respectivamente. INTRODUÇÃONos últimos anos tem-se observado o crescente interesse em estudos aplicados às energias alternativas em detrimento das provenientes do petróleo, devido às mudanças climáticas e aos impactos ambientais. Combustíveis como o biodiesel tem se mostrado atraentes, devido ao seu apelo ambiental, podendo ser produzidos utilizando óleos vegetais, de fritura ou gordura animal. Diante disso, o biodiesel é produzido pela reação de transesterificação de óleos vegetais ou gordura animal (SILVA et al., 2009). O aumento na produção de biodiesel aumenta a produção de glicerol como subproduto, ocasionando na desvalorização do mercado (DASARI et al., 2005).O glicerol pode apresentar impurezas diversas, como: álcool não reagido, água, sais inorgânicos (provenientes do catalisador não reagido), óleo de soja não hidrolisado, ácidos graxos livres, entre outras impurezas oriundas da matéria prima, as quais diminuem o preço do produto já que inviabilizam sua utilização em diversas indústrias. Para tal, seria necessário um processo de purificação; todavia o mesmo é geralmente caro, inviabilizando certas produções (CHUN-HUI et al., 2008).
RESUMO-O equilíbrio líquido-líquido ternário dos sistemas constituídos por 2propanol + sulfato/nitrato/acetato de sódio + água foram mensurados a 298,15 K e 101,3 kPa. Os pontos binodais obtidos experimentalmente foram bem ajustados pelos modelos propostos por Mistry et al. e Merchuk et al. e se mostraram semelhantes aos encontrados na literatura. Através das equações de Othmer-Tobias e Bancroft, concluiu-se que os dados das linhas de amarração eram confiáveis devido aos baixos desvios padrões encontrados. Os sistemas com sulfato apresentaram duas fases muito aquosas, enquanto que os sistemas com nitrato e acetato originaram uma fase superior rica no álcool e uma fase inferior rica em sal e água. Este comportamento é interessante para uma separação entre o 2-propanol e a água usando uma extração líquido-líquido.
The production of anhydrous ethanol, due to the presence of the azeotrope, is difficult using conventional distillation, at pressure atmospheric, as a separation process. One of the methods used is the extractive distillation, consisting in the addition of a third substance capable to change the vapor-liquid equilibrium of the system and obtaining the dehydration of ethanol. Therefore, the ethanol separation process using propylene glycol as solvent was evaluated using the ProSimPlus software. The simulation was done varying the solvent/feed ratios (S/F) in 0.5, 0.7 and 0.9 by weight. The results showed that the azeotrope was broken, obtaining the same ethanol fraction in the three ratios studied. Thus, it was chosen the lower ratio S/F (0.5) to measure the vapor-liquid equilibria of the ternary system, varying the molar concentration from 0.2 to 0.9. The experimental data were measured in triplicate in a similar Othmer's ebuliometer and the analyses of the samples were done in a digital densimeter. The experimental results showed that the azeotrope was broken, validating the results obtained in the simulation, confirming that the propylene glycol is a promising solvent for the production of anhydrous ethanol, and can be applied in the ethanol units present in Rio de Janeiro.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.