Magnesium has recently received an increased amount of interest due to its potential use in biodegradable implant applications. The rapid degradation of conventional Mg is, however, a major limitation that needs to be addressed in the design of these materials, along with consideration of toxicity in selection of alloying elements. In this study, five alloys in the Mg-xCa-ySr system (x = 0.5-7.0 wt %; y = 0.5-3.5 wt %) were prepared and characterized for their suitability as degradable orthopedic implant materials. The alloys were characterized using optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, degradation measurements in Hanks' solution at 37°C, compression testing, and in vitro cytotoxicity testing with a mouse osteoblastic cell line. The results indicate that the Mg-1.0Ca-0.5Sr alloy is the most promising alloy for orthopedic implant applications since it showed the lowest degradation rate in Hanks' solution (0.01 mL cm(-2) h(-1)) along with no significant toxicity to MC3T3-E1 osteoblasts and a compressive strength of 274 ± 4 MPa.

Biodegradable magnesium (Mg) alloys combine the advantages of traditional metallic implants and biodegradable polymers, having high strength, low density, and a stiffness ideal for bone fracture fixation. A recently developed Mg-Ca-Sr alloy potentially possesses advantageous characteristics over other Mg alloys, such as slower degradation rates and minimal toxicity. In this study, the biocompatibility of this Mg-Ca-Sr alloy was investigated in a rat pin-placement model. Cylindrical pins were inserted in the proximal tibial metaphyses in pre-drilled holes orthogonal to the tibial axis. Implant and bone morphologies were investigated using μCT at 1, 3, and 6 weeks after implant placement. At the same time points, the surrounding tissue was evaluated using H&E, TRAP and Goldner's trichrome staining. Although gas bubbles were observed around the degrading implant at early time points, the bone remained intact with no evidence of microfracture. Principle findings also include new bone formation in the area of the implant, suggesting that the alloy is a promising candidate for biodegradable orthopedic implants.

No abstract

No abstract