Demonstrating improved confinement of energetic ions is one of the key goals of the Wendelstein 7-X (W7-X) stellarator. In the past campaigns, measuring confined fast ions has proven to be challenging. Future deuterium campaigns would open up the option of using fusion-produced neutrons to indirectly observe confined fast ions. There are two neutron populations: 2.45 MeV neutrons from thermonuclear and beam-target fusion, and 14.1 MeV neutrons from DT reactions between tritium fusion products and bulk deuterium. The 14.1 MeV neutron signal can be measured using a scintillating fiber neutron detector, whereas the overall neutron rate is monitored by common radiation safety detectors, for instance fission chambers. The fusion rates are dependent on the slowing-down distribution of the deuterium and tritium ions, which in turn depend on the magnetic configuration via fast ion orbits. In this work, we investigate the effect of magnetic configuration on neutron production rates in W7-X. The neutral beam injection, beam and triton slowing-down distributions, and the fusion reactivity are simulated with the ASCOT suite of codes. The results indicate that the magnetic configuration has only a small effect on the production of 2.45 MeV neutrons from DD fusion and, particularly, on the 14.1 MeV neutron production rates. Despite triton losses of up to 50 %, the amount of 14.1 MeV neutrons produced might be sufficient for a time-resolved detection using a scintillating fiber detector, although only in high-performance discharges.

After completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreed for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3  ×  1019 m−3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.

This article describes the design and performance of a multi-point ͑200͒ high repetition rate ͑4ϫ50 Hz͒ Thomson scattering diagnostic installed on the Large Helical Device. A unique feature of this system is its oblique back scattering configuration, which enables us to observe the entire plasma region along a major radius on the midplane under a severely restricted port constraint. High throughput collection optics using a mosaic mirror of 1.5 mϫ1.8 m area yield high quality data even with 0.5 J pulse energy delivered from 50 Hz repetition rate Nd: yttrium-aluminum-garnet lasers. High repetition and high spatial resolution ͑2-4 cm͒ of the system enable us to study island evolution in the plasma.

Extremely hollow profiles of impurities ͑denoted as "impurity hole"͒ are observed in the plasma with a steep gradient of the ion temperature after the formation of an internal transport barrier ͑ITB͒ in the ion temperature transport in the Large Helical Device ͓A. Iiyoshi et al., Nucl. Fusion 39, 1245 ͑1999͔͒. The radial profile of carbon becomes hollow during the ITB phase and the central carbon density keeps dropping and reaches 0.1%-0.3% of plasma density at the end of the ion ITB phase. The diffusion coefficient and the convective velocity of impurities are evaluated from the time evolution of carbon profiles assuming the diffusion and the convection velocity are constant in time after the formation of the ITB. The transport analysis gives a low diffusion of 0.1-0.2 m 2 / s and the outward convection velocity of ϳ1 m/ s at half of the minor radius, which is in contrast to the tendency in tokamak plasmas for the impurity density to increase due to an inward convection and low diffusion in the ITB region. The outward convection is considered to be driven by turbulence because the sign of the convection velocity contradicts the neoclassical theory where a negative electric field and an inward convection are predicted.

In the Large Helical Device (LHD), the highest operational averaged beta value has been expanded from 3.2% to 4% in the last 2 years by increasing the heating capability and exploring a new magnetic configuration with a high aspect ratio. Although the magneto-hydrodynamic (MHD) stability properties are considered to be unfavourable in the new high aspect configuration, the heating efficiency due to neutral beams and the transport properties are expected to be favourable in a high-beta range. In order to clarify the effect of the global ideal MHD unstable mode on the operational regimes in helical systems, especially the beta gradients in the peripheral region and the beta value, the MHD analysis and the transport analysis are performed in a high-beta range of up to 4% in LHD. In a high-beta range of more than 3%, the maxima of the observed thermal pressure gradients at a low order rational magnetic surface in the peripheral region are marginally unstable to the low-mode-number ideal MHD instability. Though a gradual degradation of the local transport in the region has been observed as beta increases, a disruptive degradation of the local transport does not appear in the beta range up to 4%.

OVERVIEW OF THE LARGE HELICAL DEVICE PROJECT. The Large Helical Device (LHD) has successfully started running plasma confinement experiments after a long construction period of eight years. During the construction and machine commissioning phases, a variety of milestones were attained in fusion engineering which successfully led to the first operation, and the first plasma was ignited on 31 March 1998. Two experimental campaigns are planned in 1998. In the first campaign, the magnetic flux mapping clearly demonstrated a nested structure of magnetic surfaces. The first plasma experiments were conducted with second harmonic 84 and 82.6 GHz ECH at a heating power input of 0.35 MW. The magnetic field was set at 1.5 T in these campaigns so as to accumulate operational experience with the superconducting coils. In the second campaign, auxiliary heating with NBI at 3 MW has been carried out. Averaged electron densities of up to 6 × 10 19 m-3 , central temperatures ranging from 1.4 IAEA-F1-CN-69/OV1/4 2 to 1.5 keV and stored energies of up to 0.22 MJ have been attained despite the fact that the impurity level has not yet been minimized. The obtained scarling of energy confinement time has been found to be consistent with the ISS95 scaling law with some enhancement.

Abstract. In the Large Helical Device (LHD), the volume averaged beta value <β dia > of 5 %, which is the highest value in all of heliotron/stellarators and relevant to the reactor requirement, was achieved by optimizing the magnetic configuration from the viewpoint of magneto-hydrodynamic (MHD) characteristics, transport and heating efficiency of the neutral beam. This beta value was instantaneously obtained by pellet injection and maintained for more than 10τ E , whereas the steady state plasma with a maximum <β dia > of 4.8 % was sustained for 85τ E by the gas-puff fueling. While it is predicted theoretically that stochastization of the peripheral magnetic field structure develops with an increment of <β dia >, no serious degradation of the global confinement has been observed in the present <β dia > range. The several low-order MHD activities located in the periphery were enhanced with the beta value and sometimes affect the local profiles. The amplitude of the mode in the periphery strongly depends on the magnetic Reynolds number, which is close to that of the growth rate and/or the radial mode width of the resistive interchange instability.

No abstract