RESUMO -Atualmente, tem-se estudado métodos que obtenham ferritas com características nanométricas e magnéticas. Entre estes métodos, o método Pechini destaca-se por apresentar materiais com alta pureza, boa homogeneidade química e alta área de superfície. Assim, propomos obter a ferrita MnZn pelo método de Pechini com razão 3:1 e avaliar as propriedades magnéticas por meio da modificação da superfície das nanopartículas com o 3-aminopropiltrimetoxisilano, via método do refluxo, visando obtenção de um material híbrido para aplicação como biossensor. Os resultados mostram a formação de material monofásico e ferrimagnético. A presença do silano manteve as propriedades magnéticas, apresentando maior eficiência na remoção das nanopartículas em torno de 98%, indicando ser um material promissor para aplicação como biossensor. INTRODUÇÃOOs biossensores são pequenos dispositivos que utilizam reações biológicas para medir a reação antígeno-anticorpo por meio de um marcador ligado ao anticorpo (Pathak et al, 2007). Atualmente, métodos magnéticos de detecção têm sido aplicados na utilização de marcadores contendo nanopartículas magnéticas (NPMs) em seu núcleo, na tentativa de aumentar a sensibilidade do ensaio. Isto pode levar a um diagnóstico precoce de determinadas patologias como exemplo tumores e doenças autoimunes como a diabetes tipo 1 e lúpus.As NPMs são materiais que possuem partículas menores que 100 nm, podem ser manipuladas simplesmente pela influência de um campo externo, não são porosas e muito estáveis termicamente e quimicamente (Wang et al., 2009;Yong et al., 2008). Dentre as NPMs, a ferrita MnZn é uma das mais versáteis, devido às suas propriedades promissoras como alta indução magnética de saturação (0,3-0,5 T), alta permeabilidade magnética inicial (500-20000 µi) e alta resistência elétrica (0,02-20 m) (Gama, 2003). As propriedades das ferritas são conhecidas por serem influenciadas pela composição e estrutura, que por sua vez são dependentes das variáveis extrínsecas de processamento, como o método de síntese, atmosfera, tempo e temperatura de sinterização. Estas variáveis determinam a morfologia e microestrutura que por sua vez definem a propriedade requerida para uma aplicação específica (Costa et al., 2010). Dentre os vários métodos Área temática: Engenharia de Materiais e Nanotecnologia 1
INTRODUÇÃOAs nanopartículas magnéticas (NPMs) Químico, Sabará, MG, patytaraujo@gmail.com, daniel.r.cornejo@gmail.com, dbrandao@jhs.med.br, libiaconrado@yahoo.com.br, ana.costa@ufcg.edu.br Resumo O aumento no número de pessoas portadoras de diabetes nos últimos anos e a elevada relação custo benefício da tecnologia de biossensores existentes têm motivado um crescente interesse no desenvolvimento de biossensores de detecção de glicose baseados na imobilização da glicose oxidase (GOD) utilizando-se principalmente nanopartículas magnéticas. Neste contexto, nanocompósitos de Fe 2 O 3 /Fe 3 O 4 foram sintetizados por reação de combustão e tiveram sua superfície modificada com 3-aminopropiltrimetoxissilano via reação de silanização e com quitosana via reação de funcionalização para obter um material híbrido que foi avaliado como possível imobilizador de GOD. As amostras foram caracterizadas por difração de raios X, espectroscopia de infravermelho com transformada de Fourier, análise termogravimétrica, microscopia eletrônica de varredura e de transmissão, propriedades magnéticas e citotoxidade in vitro. Os resultados mostraram que foi possível obter o compósito ferrimagnético, a modificação da superfície reduziu a magnetização de saturação, mas manteve a característica ferrimagnetica, e todas as amostras foram consideradas não tóxicas. Para os testes preliminares de imobilização da GOD foi revelado que o nanocompósito modificado com silano e quitosana apresentou melhor resultado, cerca de 2,7 mg de GOD imobilizados para cada 100 mg de nanocompósito, o que torna este material uma possível alternativa para ser utilizado na fabricação de bissensores de GOD. Palavras-chave: nanocompósitos, modificação da superfície, imobilização de GOD. Abstract The increase in the number of people with diabetes in recent years and the high cost-benefit ratio of the existing biosensor technology have increased the interest for the development of glucose detection biosensor based on immobilization of glucose-oxidase (GOD
This work aims to evaluate the immobilization of glucose oxidase (GOx) with CoFe2O4nanoparticles and hybrids CoFe2O4/APTS. The nanoparticles were synthesized by combustion reaction and silanized using 3-aminopropyltrimethoxysilane (APTS). The samples were characterized by XRD, FTIR, magnetic measurements and immobilization of GOx. The results indicated single phase of spinel CoFe2O4and the addition of APTS did not alter the structure of the ferrite. The characteristic bands of spinel and characteristic bands were observed in the silane silanized sample proving the silanization of nanoparticles of CoFe2O4. The CoFe2O4nanoparticles and the hybrid had saturation magnetization of 58.0 and 53.0 emu/g and coercivity of 1.14 kOe and 1.15, indicating that the silanization does not interfere with the magnetism of the particles. The immobilized GOx was obtained with values of 0.047 and 0.050 mg/g efficiency of 84.86 and 80.30% for CoFe2O4/APTS and CoFe2O4.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.