No abstract

Precise control of morphologies of one- or two-dimensional nanostructures during growth has not been easy, usually degrading device performance and therefore limiting applications to various advanced nanoscale electronics and optoelectronics. Graphene could be a platform to serve as a substrate for both morphology control and direct use of electrodes due to its ideal monolayer flatness with π electrons. Here, we report that, by using graphene directly as a substrate, vertically well-aligned zinc oxide (ZnO) nanowires and nanowalls were obtained systematically by controlling gold (Au) catalyst thickness and growth time without inflicting significant thermal damage on the graphene layer during thermal chemical vapor deposition of ZnO at high temperature of about 900 °C. We clarify Au nanoparticle positions at graphene-ZnO heterojunctions that are very important in realizing advanced nanoscale electronic and optoelectronic applications of such nanostructures. Further, we demonstrate a piezoelectric nanogenerator that was fabricated from the vertically aligned nanowire-nanowall ZnO hybrid/graphene structure generates a new type of direct current through the specific electron dynamics in the nanowire-nanowall hybrid.

It is essential to control the electronic structure of graphene in order to apply graphene films for use in electrodes. We have introduced chemical dopants that modulate the electronic properties of few-layer graphene films synthesized by chemical vapor deposition. The work function, sheet carrier density, mobility, and sheet resistance of these films were systematically modulated by the reduction potential values of dopants. We further demonstrated that the power generation of a nanogenerator was strongly influenced by the choice of a graphene electrode with a modified work function. The off-current was well quenched in graphene films with high work functions (Au-doped) due to the formation of high Schottky barrier heights, whereas leakage current was observed in graphene films with low work functions (viologen-doped), due to nearly ohmic contact.

Tactile sensors that can mechanically decouple, and therefore differentiate, various tactile inputs are highly important to properly mimic the sensing capabilities of human skin. Herein, we present an all-solution processable pressure insensitive strain sensor that utilizes the difference in structural change upon the application of pressure and tensile strain. Under the application of strain, microcracks occur within the multiwalled carbon nanotube (MWCNT) network, inducing a large change in resistance with gauge factor of ∼56 at 70% strain. On the other hand, under the application of pressure to as high as 140 kPa, negligible change in resistance is observed, which can be attributed to the pressure working primarily to close the pores, and hence minimally changing the MWCNT network conformation. Our sensor can easily be coated onto irregularly shaped three-dimensional objects (e.g., robotic hand) via spray coating, or be attached to human joints, to detect bending motion. Furthermore, our sensor can differentiate between shear stress and normal pressure, and the local strain can be spatially mapped without the use of patterned electrode array using electrical impedance tomography. These demonstrations make our sensor highly useful and important for the future development of high performance tactile sensors.

Direct current (DC) piezoelectric power generator is promising for the miniaturization of a power package and self-powering of nanorobots and body-implanted devices. Hence, we report the first use of two-dimensional (2D) zinc oxide (ZnO) nanostructure and an anionic nanoclay layer to generate piezoelectric DC output power. The device, made from 2D nanosheets and an anionic nanoclay layer heterojunction, has potential to be the smallest size power package, and could be used to charge wireless nano/micro scale systems without the use of rectifier circuits to convert alternating current into DC to store the generated power. The combined effect of buckling behaviour of the ZnO nanosheets, a self-formed anionic nanoclay layer, and coupled semiconducting and piezoelectric properties of ZnO nanosheets contributes to efficient DC power generation. The networked ZnO nanosheets proved to be structurally stable under huge external mechanical loads.

Heteroepitaxy of vertically well-aligned ZnO nanowall networks with a honeycomblike pattern on GaN∕c-Al2O3 substrates by the help of a Au catalyst was realized. The ZnO nanowall networks with wall thicknesses of 80–140nm and an average height of about 2μm were grown on a self-formed ZnO thin film during the growth on the GaN∕c-Al2O3 substrates. It was found that both single-crystalline ZnO nanowalls and catalytic Au have an epitaxial relation to the GaN thin film in synchrotron x-ray scattering experiments. Hydrogen-sensing properties of the ZnO nanowall networks have also been investigated.

No abstract

In this work, we demonstrate the mode transition of charge generation between direct‐current (DC) and alternating‐current (AC) from transparent flexible (TF) piezoelectric nanogenerators (NGs), which is dependent solely on the morphology of zinc oxide (ZnO) nanorods without any use of an AC/DC converter. Tilted ZnO nanorods grown on a relatively low‐density seed layer generate DC‐type piezoelectric charges under a pushing load, whereas vertically aligned ZnO nanorods on a relatively high‐density seed layer create AC‐type charge generation. The mechanism for the geometry‐induced mode transition is proposed and characterized. We also examine the output performance of TF‐NGs which employ an indium zinc tin oxide (IZTO) film as a TF electrode. It is demonstrated that an IZTO film has improved electrical, optical, and mechanical properties, in comparison with an indium tin oxide (ITO) film. Enhanced output charge generation is observed from IZTO‐based TF‐NGs when TF‐NGs composed of only ITO electrodes are compared. This is attributed to the higher Schottky barrier and the lower series resistance of the IZTO‐based TF‐NGs. Thus, by using IZTO, we can expect TF‐NGs with superior mechanical durability and power generating performance.