In this study, a dielectric layer/metal/dielectric layer (multilayer) electrode is proposed as both anode and cathode for use in the fabrication of transparent and flexible organic light‐emitting diodes (TFOLEDs). The structure of multilayer electrodes is optimized by systematic experiments and optical calculations considering the transmittance and efficiency of the device. The details of the multilayer electrode structure are [ZnS (24 nm)/Ag (7 nm)/MoO3 (5 nm)] and [ZnS (3 nm)/Cs2CO3 (1 nm)/Ag (8 nm)/ZnS (22 nm)], as anode and cathode, respectively. The optimized TFOLED design is fabricated on a polyethylene terephthalate (PET) substrate, and the device shows high transmittance (74.22% around 550 nm) although the PET substrate has lower transmittance than glass. The TFOLEDs operate normally under compressive stress; degradation of electrical characteristics is not observed, comparable to conventional OLEDs with ITO and Al as electrodes. In addition, because the fabricated TFOLEDs show a nearly Lambertian emission pattern and a negligible shift of Commission International de l'Eclairage (CIE) coordination, it is concluded that the fabricated TFOLEDs are suitable for use in displays.

No abstract

The present study shows a previously undocumented role of dissolved organic matter in the marine carbonate system. During photosynthesis, phytoplankton release dissolved organic compounds containing basic functional groups that readily react with protons during seawater titration, and thereby contribute to alkalinity (a measure of buffering capacity). The magnitude of the contribution of dissolved organic compounds to seawater alkalinity is species dependent, suggesting that individual phytoplankton species exude dissolved organic compounds with unique proton accepting capacities. Our study shows that dissolved organic matter produced by marine phytoplankton during photosynthesis is a newly identified buffering component in the ocean, and indicates that the contribution of dissolved organic matter to seawater alkalinity can be significant in the biologically productive upper ocean, where to date it has been unrecognized or considered insignificant.

Recent changes of surface particulate matter (PM) concentration in the Seoul Metropolitan Area (SMA), South Korea, are puzzling. The long-term trend of surface PM concentration in the SMA declined in the 2000s, but since 2012 its concentrations have tended to incline, which is coincident with frequent severe hazes in South Korea. This increase puts the Korean government’s emission reduction efforts in jeopardy. This study reports that interannual variation of surface PM concentration in South Korea is closely linked with the interannual variations of wind speed. A 12-year (2004–2015) regional air quality simulation was conducted over East Asia (27-km) and over South Korea (9-km) to assess the impact of meteorology under constant anthropogenic emissions. Simulated PM concentrations show a strong negative correlation (i.e. R = −0.86) with regional wind speed, implying that reduced regional ventilation is likely associated with more stagnant conditions that cause severe pollutant episodes in South Korea. We conclude that the current PM concentration trend in South Korea is a combination of long-term decline by emission control efforts and short-term fluctuation of regional wind speed interannual variability. When the meteorology-driven variations are removed, PM concentrations in South Korea have declined continuously even after 2012.

The 64 MDCT is a promising technique for the detection and preoperative staging of gastric cancer.

No abstract

The optical constants, bandgaps, and band alignments of mono-, bi-, and trilayer WS2 were experimentally measured, and an extraordinarily high dependency on the number of layers was revealed. The refractive indices and extinction coefficients were extracted from the optical-contrast oscillation for various thicknesses of SiO2 on a Si substrate. The bandgaps of the few-layer WS2 were both optically and electrically measured, indicating high exciton-binding energies. The Schottky-barrier heights (SBHs) with Au/Cr contact were also extracted, depending on the number of layers (1-28). From an engineering viewpoint, the bandgap can be modulated from 3.49 to 2.71 eV with additional layers. The SBH can also be reduced from 0.37 eV for a monolayer to 0.17 eV for 28 layers. The technique of engineering materials' properties by modulating the number of layers opens pathways uniquely adaptable to transition-metal dichalcogenides.

No abstract